• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.161-170
• /
• 1998

기존에 건설된 교통시설의 운영효율을 극대화하기 위한 지능형 교통체계의 한 분야인 ATIS는 도로를 이용하는 통행자에게 편리성을 제공하는 동시에 도로를 효율적으로 운영할 수 있는 정보체계이다. ATIS 체계하에서 통행자에게 신뢰성 있는 정보를 제공하기 위해서는 교차로서의 회전에 의한 지체를 정확하게 반영함은 물론이고 실시간으로 변화하는 교통상황을 반영할 수 있는 동적인 최단경로 탐색 알고리즘이 요구된다. 하지만 기존에 발표된 동적인 최단경로 탐색 알고리즘은 회전에 대한 정보를 반영하지 못하며 정적인 최단경로 탐색 알고리즘은 회전에 대한 정보를 반영하지 못하며 정적인 탐색알고리즘 조차 회전에 대한 정보를 정확히 반영하지 못한다. 본 연구에서는 이러한 이유에서 알고리즘 내부에서 회전을 반영하기 위해 수정형 덩굴망 알고리즘의 표지기법을 이용하여 동적인 최단경로 탐색알고리즘을 개발하였다. 본 연구에서 개발한 동적 최단경로 탐색 알고리즘은 정적인 상태의 수정형 덩굴망 알고리즘에 시간에 따라 변화하는 교통상황을 반영하기 위해 시간에 대한 변수를 추가하였다. 이렇게 해서 알고리즘은 시간대별로 변화하는 통행시간을 고려하여 최단 경로를 탐색하게 되며 출발시점을 기준으로 표지를 설정하여 모든 앞선 시간에 대해 경로를 고려하도록 하였다. 매 단계에서 전 노드를 추적하여 회전에 관한 정보를 반영하도록 하였다. 따라서 본 연구에서 개발한 최단경로 탐색 알고리즘은 교차로에서의 회전에 대한 정보와 통행금지 등을 정확히 반영하며 실시간으로 변화하는 통행시간을 반영함으로써 신뢰성 있는 노선 정보를 ATIS를 이용하는 통행자들에게 제공하는데 활용될 수 있는 기법이다.적으로 세부적 차종분류로 접근한다.의 영향들을 고려함으로써 가로망 설계 과정에서 가로망의 상반된 역할인 이동성과 접근성의 비교가 가능한 보다 현실적인 가로망 설계 모형을 구축하고자 한다. 지금까지 소개된 가로망 설계모형들은 용량변화에 대한 설계변수의 형태에 따라 이산적 가로망 설계 모형과 연속적 가로망 설계모형으로 나뉘어지게 된다. 본 논문의 경우, 계산속도의 향상 측면에서는 연속적 가로망 설계 모형을 도입할 수 있지만, 이때 요구되는 도로용량이 이산적인 변수(차선 수)로 결정되어야만 신호제어 변수를 결정할 수 있기 때문에, 이산적 가로망 설계 모형이 사용된다. 하지만, 이산적 설계모형의 경우 조합최적화 문제이므로 정확한 최적해를 구하기 위해서는 상당한 시간이 소요되며, 경우에 따라서는 국부 최적해에 빠지게 된다. 이러한 문제를 극복하기 위해, 우선 이상적 모형의 근사화, 혹은 조합최적화문제를 위해 개발된 Simulated Annealing기법의 적용, 연속적 모형의 변수를 이산화하는 방법 등 다양한 모형들을 고려해 본 뒤, 적절한 모형을 적용할 것이다. 가로망 설계 모형에서 신호제어를 고려하기 위해서는 주어진 가로망에 대한 통행 배정과정에서 고려되는 통행시간을 링크통행시간과 교차로 지체시간을 동시에 고려해야 하는데, 이러한 문제의 해결을 위해서 최근 활발히 논의되고 있는 교차로에서의 신호제어에 대응하는 통행배정 모형을 도입하여 고려하고자 한다. 이를 위해서 지금까지 연구되어온 Global Solution Approach와 Iterative Approach를 비교, 검토한 뒤 모형에 보다 알맞은 방법을 선택한다. 차량의 교차로 통행을 고려하는 perf

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.29-37
• /
• 2017

Intersection signal's phase time is calculated and determined by car and pedestrian traffic volume. If signal phase time and traffic volume dis-matched, cars and pedestrians have much delay time. This paper suggested an All-Red phase application method that cars and pedestrians securing safety and minimizing traffic signal waiting time. The key solution of this suggested method is determining All-Red phase operation by using sum of spare green time that have no passing cars. That is, total time of spare green time that have no passing cars is longer than All-Red phase time, operating All-Red phase has an effect. And case study carried out at the signalized intersection, revealed that this suggested method has much effectiveness.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.91-100
• /
• 2008

Pedestrians are exposed to accidents as a result of the lack of understanding the meaning of a flashing green signal. This study was to designed to relate changes of pedestrians' crossing characteristics as a functions of flashing green signal timings. A field survey was conducted to collect pedestrian preference and safety and it was examined by signal operation experiment. Two versions of new pedestrian signal timings were compared to the existing pedestrian signal timings. The results indicated that the number of pedestrians who starts to cross during flashing green signals was significantly decreased when flashing green signals started at 1/2 or 2/3 point of crossing. However, the number of pedestrians who remain in the crossing during red signals was significantly increased when flashing green signals started at 2/3 point of crossing. This study concludes that starting flashing green signals at 1/2 point of crossing is the safest. Also, implication and directions for its practical relevance were discussed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.21-28
• /
• 2012

The continuous deployment of Urban Traffic Information System (UTIS) in Korea has increased the need for developing more practical applications utilizing the standard functions of UTIS facilities installed on urban arterials beyond its basic applications like gathering traffic data and providing traffic information. The UTIS-based bus signal priority may be one of UTIS-based applications meeting such demands. However, the studies on BSP have not been sufficient for actual field deployment in terms of theories and algorithms so that there have been few actual installations on real urban arterials. Thus, this study was aimed at developing a UTIS-based bus priority signal system and evaluating its effectiveness through a field study. To this end, this study presents the system development processes by dividing the UTIS-based bus priority signal system into hardware and software. In addition, the positive effectiveness of the UTIS-based bus priority signal system was verified through a field application test which was conducted at Gyeonggi Global Trade High School intersection.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.79-90
• /
• 2003

Internal metering policy(IMP) is a control strategy to improve the quality of traffic flow within a network by avoiding queue spillback or intersection blockage. It is a more aggressive control strategy than the current control strategy employed in COSMOS. A preliminary study was made to incorporate the IMP logic within the COSMOS system to improve its' functionality at oversaturated conditions. From the study results, a set of guideline for real implementation was recommended : traffic conditions, detector configurations, and control procedures, etc. A simulation study was performed to evaluate the effectiveness of the proposed guidelines. It was shown that the occurrence of queue spillback was minimized. and overall network performance was also improved by applying IMP logic as compared to COSMOS control onl.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.14-27
• /
• 2020

Pedestrian deaths account for a high percentage of deaths in traffic accidents in Korea, raising interest in pedestrian safety policy. However, since the walk signal time is applied based on the length of the crosswalk without considering the walker and the signal cycle, the walk waiting time is relatively longer than the crosswalk, causing pedestrian jaywalking. In this study, due to an unreasonable signal time plan during a road crossing where a signal is installed, the pedestrian's walk signal was given twice a cycle of crossings, and the operational and safety effects of the signal system were quantitatively and qualitatively analyzed, and the operational effects of the signal interval and jaywalking rate were assessed by different signal intervals. The results showed that jaywalking and waiting time decreased, and the shorter the interval between the application of the walk signal time, the less jaywalking is analyzed. However, there is a risk of vehicle conflict due to pedestrian exposure, and measures for expanding safety for operation were proposed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.138-152
• /
• 2007

A communication system based on DATEX-ASN, an international communication protocol for use in COSMOS, a real-time traffic responsive signal system of Seoul, was developed in this study. Through laboratory experiments, it was identified that some additional rules were necessary for its successful application to COSMOS and thus proper complementary rules were devised. Laboratory experiments were to measure error-rates of monitoring information packet, EOC duration and operating cycle-length errors at different data transmission rates and the results of each experiment were compared each other. The results show that the DATEX-ASN protocol requires a transmission rate of at least 9,600bps which is higher than a transmission rate of 4,800bps required by NTCIP.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.34-44
• /
• 2007

Many urban cities deployed ITS technologies to improve the efficiency of traffic operation and management including a real-time franc control system (i.e., COSMOS). The system adopted loop detector system to collect traffic information such as volume, occupancy time, degree of saturation, and queue length. This paper investigated the applicability of detector information within COSMOS to represent the congestion level of the links. Initially, link travel times obtained from the field study were related with each of detector information. Results showed that queue length was highly correlated with link travel time, and direct link travel time estimation using the spot speed data produced high estimation error rates. From this analysis, a procedure was proposed to estimate congestion level of the links using both degree of saturation and queue length information.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.367-374
• /
• 2006

This research revealed the operation problems of the current crossing control systems through inspecting and testing the obstacle detection systems and gate control systems for the crossings. To resolve the problems of the crossing control systems, this research developed new algorithms of four-quadrant gate system and obstacle detection systems combing the functions of rasar sensors and magnetic sensors and tested the reliability of the systems. Currently, the obstacle detection systems and gate control systems controls approaching and departing traffic by simply detecting vehicles and obstacles but do not consider traffic movements at the crossings. In addition, they do not make signal cooperation for gate controls. As a result, such inefficient crossing controls result in unsafe gate controls for drivers. Therefore, the newly developed crossing control systems through this study will provide more effective crossing control services with more strengthen information cooperation within control systems. Besides they will help to reduce train crashes at the crossings by gate control systems considering various driving behaviors.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.138-142
• /
• 2019

By securing golden time, this study analyzed the effects of an emergency vehicle priority system in Cheongju, North Chungcheong province. Until the scene of a fire is reached, severe obstacles in the street, such as traffic congestion, cars coming forward, non-cooperative vehicles etc., are significant. To solve these problems of road obstacles, it is essential to adopt an emergency vehicle priority system. From April 2017 to June 2018 (1 year and 2 months, 426 days), the dispatch time and date, fire truck moving distance and required time, traffic signal control section and pass time, and shortening time, were measured. This study selected 140 cases consisting of five heavy traffic and frequent dispatch routes out of 293 cases. The effects of the emergency vehicle priority system were excellent. Overall, it took 3 min 3 s to pass 1 km on an uncontrolled traffic signal section. On the other hand, it took 1 min 23 s to pass 1 km on the same section that was controlled. The shortening time to pass 1 km was 1 min 40 s, showing a 45.4% reduction. This means that the 15 min driving time can be reduced to 6 min and 49 s. From this result, an emergency vehicle priority system should be implemented nationwide as soon as possible.