• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.177-178
• /
• 2021

우리나라 차량의 수는 매년 증가한다. 한 가구당 2대 이상의 차량을 가지고 있는 경우는 드물지 않다. 이는 도로의 포화를 발생시키고 교통사고의 원인이 된다. 본 연구에서는 안전성을 더욱 증가시키는 것을 전제로 아두이노를 이용한 초음파 센서와 라즈베리를 통한 블루투스 기술을 통해 LED 패널에 적용하고자 한다. 현재 많은 차량에는 후방 감지 센서와 차량 후방에서 다가오는 차량을 감지하는 센서 등을 사용하고 있다. 이 기술들은 운전자를 보호하는 장치이지만 모두 개인적으로 사용되는 장치이므로 다른 운전자를 보호하기 위한 장치가 필요하다. 또한, 이러한 시스템이 설치되어 있지 않은 차량이 많다. 추가로 설치하기 위해서 보다 큰 비용을 내야 하므로 적은 비용에 비해 큰 효율을 발생할 수 있는 가성비 좋은 장치가 필요하다. 본 논문은 이러한 문제점들을 개선하기 위해 버스에 장착된 LED 패널과 도로정비 차량 후방에 장착된 LED 패널에서 아이디어에 착안하여 '차량용 후방 안전 LED 패널' 기술을 제안한다. 기존에 글자를 이용해 단순히 의사소통이 가능한 LED 패널을 아두이노와 라즈베리 파이를 통해 사용자가 출력하고 싶은 문구를 실시간으로 출력하여 다른 운전자에게 정보를 전달할 수 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.285-292
• /
• 2006

The objective of this study is to introduce the development of the first Korean full-scale APT(Accelerated Pavement Tester) and to compare the performances of general dense grade asphalt mixture and modified asphalt mixtures as the first running of the tester. The tests evaluated the rutting resistance for dense grade mixture and three different modified asphalt mixture under three different temperature conditions (25-30, 40, $50^{\circ}C$). The results of the testing were compared with the laboratory test results. Results of the tests indicated that the all the modified asphalt sections showed higher rutting resistance than the dense grade section. Especially, the difference was more noticeable at higher temperature condition. Additionally, $G^*/sin{\delta}$ is found out to be an important factor for permanent deformation prediction whereas the resilient modulus was not.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.675-683
• /
• 2010

Namsan in Seoul is major tourist attraction. However, despite of the proximity of the location to the center of the city, Namsan is not good for visitors for uncomfortable accessibility. This study proposed improvements of guidance system for easily access. Sign system and pedestrian circulation system were analyzed from the nearest public transportation around the park to where the entry of Namsan park. At first, we surveyed installation and type of sign system by field research and pedestrian way accessing to Namsan park by behavior survey. Through the analysis of current guidance system, this study suggests ways to improve following as; the reclassification of functions and types, sign installation planning and extracting main pedestrian circulation for easy access. Improved guidance system can ameliorate accessibility to Namsan and encourage greater use as the representative park of Seoul.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.339-349
• /
• 2010

The objective of this paper is to develop a structural equations model system for the purpose of tourists' excursion behaviour analysis with their information usage. A tourist' excursion behavior defined as activities in the sightseeing region between arriving and leaving time includes indexes with respect to activity' time use and the number of spots. Additionally, such indexes can be modeled as endogenous variables in the structural equation model system on the assumption that they are influenced by the degree of familarity on the sightseeing region, the degree of information usage, and individual attributes. The case study application involves excursion behaviour data such as one-day excursion activity and information usage diary that are observed in the Fuji Five Lakes, Japan. Since the models presented in the paper are available to statistically analyze the covariance among the endogenous variables, they have the advantage of effectiveness analysis on information usage in the excursion area, compared to the prior approaches such as discrete choice models.

• Design Convergence Study
• /
• v.13 no.5
• /
• pp.131-145
• /
• 2014

Considering the number of population commuting from Gyeonggi to Seoul, the development of the bus system is relatively slow. There are many problems to be solved but it has been overlooked, leaving the users in discomfort. The goal of this research is to improve the current system to satisfy the unmet needs, using HCI methods, which is composed of five steps, including Define, Find, Analyze & Synthesize, Ideation, Develop. In Define, we recruited the interviewees using the extreme user method to find their needs. In Find, we proceeded 'be the customer', shadowing for background research and in-depth interview. In Analyze & Synthesis, we analyzed the customer needs and clustered to similar needs to draw useful ideas. After that we suggested sophisticated ideas based on design principles from previous stage and visualized in user scenarios and mock-ups. Overall, the research suggests with text message service, informative light service and mobile application to improve the existing bus station.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.1
• /
• pp.197-205
• /
• 2024

Development of AI and big data-based algorithms to advance and optimize the recognition and detection performance of various static/dynamic vehicles in front and around the vehicle at a time when securing driving safety is the most important point in the development and commercialization of autonomous vehicles. etc. are being studied. However, there are many research cases for recognizing the same vehicle by using the unique advantages of radar and camera, but deep learning image processing technology is not used, or only a short distance is detected as the same target due to radar performance problems. Therefore, there is a need for a convergence-based vehicle recognition method that configures a dataset that can be collected from radar equipment and camera equipment, calculates the error of the dataset, and recognizes it as the same target. In this paper, we aim to develop a technology that can link location information according to the installation location because data errors occur because it is judged as the same object depending on the installation location of the radar and CCTV (video).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.230-245
• /
• 2023

The importance of evaluating the safety of Automated Vehicles (AV) is increasing with the advances in autonomous driving technology. Accordingly, an evaluation scenario that defines in advance the situations AV may face while driving is being used to conduct efficient stability evaluation. On the other hand, the single scenarios currently used in conventional evaluations address limited situations within short segments. As a result, there are limitations in evaluating continuous situations that occur on real roads. Therefore, this study developed a set of multiple scenarios that allow for continuous evaluation across entire sections of roads with diverse geometric structures to assess the safety of AV. In particular, the conditions for connecting individual scenarios were defined, and a methodology was proposed for developing concrete multiple scenarios based on the scenario evaluation procedure of the PEGASUS project. Furthermore, a simulation was performed to validate the practicality of these multiple scenarios.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.6
• /
• pp.131-142
• /
• 2007

The road user cost in indirect costs as well as direct costs such as the inspection/ diagnosis cost and the repair/reinforcement cost should be considered as one of the important items in the life-cycle cost-effective design and maintenance of the bridges. To estimate the road user cost, this paper formulates the road user cost as a sum of the user delay cost and the vehicle operating cost considering the detour effect. A numerical traffic simulation and a regression analysis are performed to develop a regression model due to a time delay. The proposed regression model is applied to the generation of the maintenance strategy based on the life-cycle cost and performance, and its effectiveness and applicability is investigated. The road user cost has a great influence on establishing the maintenance strategy, and the proposed regression model could be successfully utilized to estimate the road user cost of a bridge.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.4_2
• /
• pp.833-840
• /
• 2024

According to recent data from the Korea Meteorological Administration(KMA), the frequency of typhoons around the Korea Peninsula is almost unchanged, but the intensity is on the rise due to climate change. A typhoon that has become so powerful can cause partial or complete damage to the traffic signal structures, limiting the operation of the vehicle and causing traffic congestion. If the traffic signal structure fails to function properly due to the influence of the typhoon, not only the v ehicle operation will be disrupted, but also direct damage to the traffic signal structure will occur. In addition, if the social overhead cost of traffic congestion is included, the recovery cost caused by the typhoon will increase to an extent that it is difficult to estimate. Therefore, in this study, a wind tunnel experiment was performed by producing a wind tunnel model of an existing fixed traffic signal structure and a traffic signal structure in which signs and traffic lights are hinged. Also, The fixed and hinge structures were modeled as 3D finite elements, and wind-resistant analysis was performed by wind speed, and, wind-resistant safety of traffic signal structures were analyzed and examined through wind-resistant analyses. From the comparative analysis of the results of experiment and FE analysis, it was known that the stress reduction rate of the hinge connection structure was at least 30% compared to that of the fixed connection structure from the results of the wind tunnel experiment and FE analysis. And As a result of finite element analysis for the maximum design wind speed of 50m/s, it was found that the maximum stress generated in the existing structure exceeded all the yield stress, but the maximum stress of the hinge connection structure was within the yield stress. Finally The hinge connection structure showed a relatively large stress reduction rate as the wind speed increased and the length of the lateral beam was shorter at the same wind speed.

• Korean Security Journal
• /
• no.21
• /
• pp.155-175
• /
• 2009

RFID that provide automatic identification by reading a tag attached to material through radio frequency without direct touch has some specification, such as rapid identification, long distance identification and penetration, so it is being used for distribution, transportation and safety by using the frequency of 125KHz, 134KHz, 13.56MHz, 433.92MHz, 900MHz, and 2.45GHz. Also it is one of main part of Ubiquitous that means connecting to net-work any time and any place they want. RFID is expected to be new growth industry worldwide, so Korean government think it as prospective field and promote research project and exhibition business program to linked with industry effectively. RFID could be used for access control of person and vehicle according to section and for personal certify with password. RFID can provide more confident security than magnetic card, so it could be used to prevent forgery of register card, passport and the others. Active RFID could be used for protecting operation service using it's long distance date transmission by application with positioning system. And RFID's identification and tracking function can provide effective visitor management through visitor's register, personal identification, position check and can control visitor's movement in the secure area without their approval. Also RFID can make possible of the efficient management and prevention of loss of carrying equipments and others. RFID could be applied to copying machine to manager and control it's user, copying quantity and It could provide some function such as observation of copy content, access control of user. RFID tag adhered to small storage device prevent carrying out of item using the position tracking function and control carrying-in and carrying-out of material efficiently. magnetic card and smart card have been doing good job in identification and control of person, but RFID can do above functions. RFID is very useful device but we should consider the prevention of privacy during its application.