• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.3
• /
• pp.459-475
• /
• 2008

This study analyzes the network structure of the Metropolitan Seoul subway system by applying complex network analysis methods. For the purpose, we construct the Metropolitan Seoul subway system as a network graph, and then calculate various indices introduced in complex network analysis. Structural characteristics of Metropolitan Seoul subway network are discussed by these indices. In particular, this study determines the shortest paths between nodes based on the weighted distance (physical and time distance) as well as topological network distance, since urban travel movements are more sensitive for them. We introduce an accessibility measurement based on the shortest distance both in terms of physical distance and network distance, and then compare the spatial structure between two. Accessibility levels of the system have been getting up overall, and thus the accessibility gaps have been getting lessen between center located subway stops and remote ones during the last 10 years. Passenger traffic volumes are explored from real passenger transaction databases by utilizing data mining techniques, and mapped by GIS. Clear differences reveal between the spatial patterns of real passenger flows and accessibility. That is, passenger flows of the Metropolitan Seoul subway system are related with population distribution and land use around subway stops as well as the accessibility supported by the subway network.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.821-827
• /
• 2020

In particular, vehicles with internal combustion engines of public transportation such as diesel and CNG buses are in urgent need of measures to reduce emissions as they have a long daily total mileage, long driving hours and a large number of vehicles. In this paper, the fuel consumption rate (km/kWh) was actually measured through road test of electric buses. Based on the measured values, CO₂ emissions from internal combustion engines and electric buses were calculated per bus. In addition to environmental improvement effects such as the expected reduction of carbon dioxide compared to CNG buses when replacing city buses with electric buses, additional effects were analyzed when the replacement of CNG buses is expanded to electric buses.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.7-7
• /
• 2023

국내뿐만 아니라 세계적으로도 산사태 발생에 따른 토석류 피해가 빈번하게 발생하고 있으나 아직 토석류 거동에 대한 물리적인 특성을 규명하고, 실험 등을 통한 면밀한 검토가 안 되었다. 토석류는 집중호우 시 토사 내 함수량의 증가로 인해 또는 지진, 화산 발생 시 지각 변동으로 인해 사면의 저항력이 약화되어 발생한다. 이러한 토석류는 재해를 일으키는 매우 위험한 자연 현상이며, 그 규모에 따라 하류부에 큰 피해를 발생시킬 수 있다. 국내에서 수행된 토석류 관련 연구들은 해외에서 주로 수행된 기초연구 결과를 이용한 토석류 피해 발생예측, 위험지도 작성, 토석류 방지 구조물 개발 등의 응용연구가 대부분이며 소규모 모형을 제작하여 수리실험이 진행되었다. 김기환 외(2008)은 토석류 확산형태와 흐름 속도에 대한 모형실험을 수행하였으며, 김영일과 백중철(2011)은 토석류 유동과 퇴적 특성에 대한 실험을 수행하였다. 미국의 경우 미지질조사국(USGS, U.S Geological Survey)에서 1994년부터 지금까지 100 m 길이의 대형 경사수로를 이용하여 토석류 수리모형실험을 수행하고 있으며 이를 통해 토석류의 수위, 충격력, 전파속도, 유출 후 퇴적형상 등에 대한 다양한 실험데이터를 제시하고 있다. 그러나, 현재까지 국내외 토석류 실험에 대한 표준실험방법과 기준이 정립되지 않아 실험결과의 신뢰성을 명확히 증명하기 어려운 실정이다. 토석류로 인한 가장 직접적인 피해 인자인 토석류의 충격력과 전파속도를 수리모형실험을 통해 정량적으로 파악하기 위한 시험 표준으로 시험 절차, 시험 방법 및 적정한 측정장비의 사양 등을 단체표준을 통해 제공함으로써 시험의 불확실성을 최소화하고, 명확한 프로세스에 따른 시험 결과의 신뢰성과 일관성을 확보하고자 한다. 국토교통연구인프라운영원에서는 단체표준 개발을 위한 시험기관협의체를 구성하고, 이해관계인들의 의견을 반영한 토석류 충격력과 전파속도 측정방법(안)을 2022년에 7월 작성하였으며, 현재 이해관계자들의 의견을 수렴하고 중소기업중앙회에 심의를 상정한 상태이다.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.89-98
• /
• 2006

The weight-to-power ratio of the standard truck for the climbing lane design is known to be 200lb/hp. The value was known to be assumed based on constant trucks' capability and regional distributions in stead of widely varied distributions region by region. Additionally, this value was assumed after investigating registered vehicles' statistics instead of investigating real portions of truck volumes. Therefore, it may be said that the value of the current standard truck does not reflect regional or industrial diversity and proportions of truck volumes. To resolve these issues, the present paper studies diversified standard trucks which consider regionally or industrially diversified and observed-volume based weigh-to-power ratios. For this purpose, individual trucks' weigh-to-power ratios obtained at toll-gates of national expressways were used. For regionally based study, the whole nation are divided into 8 regions, then each region is characterized by a unit of a weigh-to-power ratio. The applicability of each value is provided. Results show that the single value for the nationwide standard truck may be 208 lb/hp, 8 lb/hp higher than the current value of 200 lb/hp. Results also show that regional values ranged widely from 170 lb/hp to 230 lb, 30 lb/hp higher/lower than the current value. Conclusively, regional diversity of trucks' weigh-to-power ratios was identified then three types of standardized weigh-to-power ratios which may represent regional characteristics were suggested. As the diversified standard truck are applied to the design standard, two benefits are expected such as decrease of rear-end accident rates or decrease of climb lane construction costs.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.55-64
• /
• 2010

In order to prepare an efficient solution for PM10 reduction in underground stations, the authors measured PM10 concentration levels every 30 minutes in the concourse, platform, and tunnel of Gaehwasan Station of Seoul's subway line 5. Through a correlation analysis of each changing pattern of PM10 concentration, the direction and velocity of diffusion in underground stations were estimated. The PM10 concentration levels were highest in the tunnel, followed by the platform and concourse. PM10 concentrations in the tunnel, platform, and concourse showed a pattern of increasing in the rush hours and decreasing in the non-rush hours. According to the statistical analysis of PM10 concentrations and changing patterns in each location, the higher PM10 concentration in the tunnel expanded to the platform, and some from the platform expanded to the concourse. Therefore, to efficiently reduce PM10 concentrations, it is essential to detect the centralized generation, diffusion factor, expanding route, expanding measure, and other variables and to remove or reduce the diffusion factor and level. Through operating the ventilation system in the right time frame while the PM10 concentration level increases, the power consumption and peak power consumption can be reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.223-229
• /
• 2020

Biodiesel produced using microorganisms, which are recognized as the third-generation biomass, is among the various known renewable energy sources that can replace fossil fuels used in conventional transportation. Scenedesmus obliquus has been identified as an excellent species for biodiesel production, as it grows faster and can accumulate up to 40-50 percent of the dry cell weight. Enhancing production using S. obliquus requires measuring the cell mass for controlling the cultivation process. In the current study, S. obliquus was cultured for 75 days, and growth changes of the microalgae were measured by absorbance, microscopic imaging, and Raman spectroscopy. Between days 60 to 75 of culture, the change in absorbance was observed to be less than 3%, whereas the number of microalgae observed microscopically was more than three times higher. Moreover, the Raman spectroscopy results showed three strong peak values of β-carotene at 997 cm^-1, 1148 cm^-1, and 1515 cm^-1, with peak values of β-carotene showing greater than 3-fold increase during the culture period. Therefore, we predict that application of Raman spectroscopy will help in identifying the growth elements and growth degree in microalgae culture during increased biomass production.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.1
• /
• pp.30-37
• /
• 2015

BACKGROUND: During the winter, the use of deicers was rapidly increased for reduction of traffic accidents as well as injuries in Korea, whose components are largely comprised of calcium chloride and sodium chloride. Recently, to reduce the adverse effects of chloride-deciers such as pollution of water and soil, and decrease of agricultural productivity, the attention of eco-friendly deciers have been increased. This study aimed to investigate biological effects of magnesium chloride deicer (PC-10) and organic acid deicer (EFD-1) against wheat, barley, and spinach. METHODS AND RESULTS: We examined the effect of two deciers, PC-10 and EFD-1 on the seed germination and growth of wheat, barley and spinach. EFD-1 showed higher suppression of the germination than PC-10 among tested crop seeds. In demage index of the seedlings of the crops, there was no symptoms in spinach such as spotting and color change of leaves. EFD-1 showed much stronger inhibitory effect on the germination of tested crop seeds than PC-10 when crops were exposed continuously to tested deciers in soils. The growth and shoot and root in examined crops was relatively higher in PC-10 treatment than in EFD-1 treatment when compared to the control. The biomass decrease was found in all examined conditions of deciers. PC-10 showed 23-35% reduction of biomass whereas EFD-1 exhibited 39-84% loss in all examined crops at over 2% concentration. CONCLUSION: These results suggest that the effects of deicers used in this study by inputting into soil against growing tested crops cause the reduction of germination of seeds, growth, and biomass compared to the control.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.653-659
• /
• 2019

The purpose of this study is to measure the (air dose rate of radiation dose) the discharged patient who was administrated high dose $^{131}I$ treatment, and to predict exposure radiation dose in public person. The dosimetric evaluation was performed according to the distance and angle using three copper rings in 30 patients who were treated with over 200mCi high dose Iodine therapy. The two observer were measured using a GM surverymeter with 8 point azimuth angle and three difference distance 50, 100, 150cm for precise radion dose measurement. We set up three predictive simulations to calculate the exposure dose based on this data. The most highest radiation dose rate was showed measuring angle $0^{\circ}$ at the height of 1m. The each distance average dose rate was used the azimuth angle average value of radiation dose rate. The maximum values of the external radiation dose rate depending on the distance were $214{\pm}16.5$, $59{\pm}9.1$ and $38{\pm}5.8{\mu}Sv/h$ at 50, 100, 150cm, respectively. If high dose Iodine treatment patient moves 5 hours using public transportation, an unspecified person in a side seat at 50cm is exposed 1.14 mSv radiation dose. A person who cares for 4days at a distance of 1 meter from a patient wearing a urine bag receives a maximum radiation dose of 6.5mSv. The maximum dose of radiation that a guardian can receive is 1.08mSv at a distance of 1.5m for 7days. The annual radiation dose limit is exceeded in a short time when applied the our developed radiation dose predictive modeling on the general public person who was around the patients with Iodine therapy. This study can be helpful in suggesting a reasonable guideline of the general public person protection system after discharge of high dose Iodine administered patients.

• Journal of Environmental Policy
• /
• v.9 no.1
• /
• pp.137-154
• /
• 2010

These objectives of this study were to compute heavy metal and accumulation carbon dioxide fixing quantity from urban green space(street trees and urban parks) in Cheong-ju city and Chungju-city and thus to estimate the effect of urban green space for improving the urban environment. The results are summarized below. 1. Results of the total accumulation of the carbon dioxide fixing quantity of street trees, Cheong-ju city and Chungju-city street tree was 1, 230,000kg-C, 1,270,000 kg-C, respectively. Total accumulation carbon dioxide fixing quantity of Balssan urban park had a 25,000kg-C in Cheong-ju city, Degami sports park had a 6,400kg-C in Chungju-city. 2. Results of heavy metal for street trees, fell in the order Zn > Cu > Cr > Ni >, the highest accumulated heavy metal was Zn, and the lowest was Ni. Total heavy metal concentration according to land-use area, was observed in order, for residental areas(157.26 mg/kg) > industrial areas(141.71 mg/kg) > commercial areas(118.55 mg/kg) > and greenspace areas(61.95 mg/kg) in Cheong-ju city. 3. Total heavy metal concentration for street trees fell in the order of commercial areas(84.48 mg/kg) > residental areas(83.70 mg/kg) > and greenspace(48.23 mg/kg) according to land-use area in Chungju-city. Comparatively, Cheong-ju city had more total heavy metal concentration than Chungju-city. 4. Heavy metal for soil that planted street trees was observed in order of Zn > Cu > Pb( > Ni > Cr > As > Cd), and Zn was highest, and Cd was lowest. Total heavy metal concentration for soil fell in the order commercial area(91.82mg/kg) > industrial area(85.96mg/kg) > residental area(67.55mg/kg) > greenspace(43.13mg/kg) according to land-use area in Cheong-ju city. 5. Heavy metal for soil that planted street trees was observed in order of Zn > Pb > Cu( > Ni > Cr > As > Cd, and Zn was highest. Total heavy metal concentration for soil fell in the order commercial area(87.66mg/kg) > greenspace(72.73mg/kg) $${\geq_-}$$ residental area(70.10mg/kg) in Chungju-city.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.1-12
• /
• 2009

A new mix design procedure for cold in-place recycling using foamed asphalt (CIR-foam) has been developed for Iowa Department of Transportation. Some strengths and weaknesses of the new mix design parameters were considered and modified to improve the laboratory test procedure. Based on the critical mixture parameters identified, a new mix design procedure was developed and validated to establish the properties of the CIR-foam mixtures. As part of the validation effort to evaluate a new CIR-foam mix design procedure, dynamic moduli of CIR-foam mixtures made of seven different reclaimed asphalt pavement (RAP) materials collected throughout the state of Iowa were measured and their master curves were constructed. The main objectives of this study are to provide: 1) standardized testing procedure for measuring the dynamic modulus of CIR-foam mixtures using new simple performance testing (SPT) equipment; 2) analysis procedure for constructing the master curves for a wide range of RAP materials; and 3) impacts of RAP material characteristics on the dynamic modulus. Dynamic moduli were measured at three different temperatures and six different loading frequencies and they were consistent among different RAP sources. Master curves were then constructed for the CIR-foam mixtures using seven different RAP materials. Based upon the observation of the constructed master curves, dynamic moduli of CIR-foam mixtures were less sensitive to the loading frequencies than HMA mixtures. It can be concluded that at the low temperature, the dynamic modulus is affected by the amount of fines in the RAP materials whereas, at the high temperature, the dynamic modulus is influenced by the residual binder characteristics.