• Land and Housing Review
• /
• v.5 no.4
• /
• pp.297-303
• /
• 2014

Recently, block and permeable pavements have been placed in apartment complex. However. it is hard to decide the cycle of maintenance and repair due to lack of performance evaluation criteria for these pavements. This study carried out life cycle cost analysis(LCCA) to present resonable alternatives of the pavements by considering initial construction cost, maintenance and repair cost along with the cycle of repair. According to results of LCCA, the interlocking concrete block pavement is the best alternative when the repair cycle of 20years is assumed, while asphalt concrete pavement is the best alterative when the repair cycle of 10years is assumed. Therefore, the repair cycle is most important factor to select alternative. Also, it is necessary to develop resonable performance evaluation index to quantify the cycle of maintenance and repair in the future.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.375-376
• /
• 2008

본 논문은 보호배전반의 교체기준 설정에 관한 연구이다. 보호배전반의 기능을 최대한 활용하기 위하여 교체를 적절하게 해야한다. 본 논문에서는 보호배전반의 최적 교체주기를 찾기 위하여 다양한 시도를 하였다. 고장데이터로 고장 분포함수를 이용한 이론적인 수명주기 활용, 현장 전문가 의견, 제작사 전문가 경험 등을 종합하여 새로운 최적 교체주기를 제안하였다.

• Plant Journal
• /
• v.9 no.4
• /
• pp.31-36
• /
• 2013

In order to extend a hot gas parts replacement cycle of a gas turbine, blade row 1 from low pressure turbine, which has a significant impact on the cycle, has been selected from stored set after one cycle use. Taking into account the status of the first stage moving blade in LP turbine operated more than 27,000 equivalent operating hours(EOH) and the replacement cycle in the same type of gas turbine, the replacement of the high temperature components installed on the GT, a study subject, can be extended from 24,000 to 27,000 EOH.

• Proceedings of the Korean Reliability Society Conference
• /
• 2006.05a
• /
• pp.345-353
• /
• 2006

전력량계가 기계식에서 전자식으로 변화되면서 전력량계 교체주기의 재설정이 요구되고 있다. 현재까지는 기계식 전력량계의 교체주기를 적용하여 7년으로 교체주기를 정하고 있으나 기계식과 전자식은 차이가 있으므로 전자식 전력량계의 적정한 교체주기를 결정하여야 한다. 적정한 교체주기를 결정하기 위해서는 전자식 전력량계의 수명평가가 선행되어야 한다. 본 연구에서는 전자식 전력량계의 부품 분석을 통하여 전자식 전력량계의 수명에 영향을 미칠 수 있는 부품을 선정하고, 선정된 부품에 대하여 가속수명시험을 실시하였다. 가속수명시험 결과로부터 부품들의 수명을 추정하고, 수명이 가장 짧아서 전자식 전력량계의 수명을 결정하는 부품의 종류를 확인하였다. 전력량계의 수명은 가장 짧은 수명을 갖는 부품의 수명에 의존하므로 부품들의 수명 추정 결과로부터 전력량계의 수명을 평가할 수 있었다. 또한, 수명이 가장 짧은 부품에 대하여 목표 수명 이상의 수명을 가짐을 보증하기 위한 시험기준을 설계하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.193-198
• /
• 2010

This study aimed at presenting the improvement plan for estimation of the repair and replacement cycle to analyze these current problems by considering the repair and replacement cycle theoretically and examining estimation status of home and abroad, and then drawing implication and problem based on brainstorming and expert opinion. The findings of a study is as follows. First, the problem is, for the domestic, that there is no clear standard of division to the cycle of repair and replacement and the repair and replacement cycle considering capability to deal with the change by construction method, development of the function of material and the number of years of progress is not being applied. That is, an estimation of economical repair and replacement cycle which considers the case that a large scale repair with the level of remodeling is done between 25 years and 35 years is necessary. For estimating the repair and replacement cycle, foreign country is providing this according to the use or the level of function of a building, but it is not the case for the domestic. A characteristic of each building should be reflected and the standard of estimation of the repair and replacement cycle to new construction material or method should be prepared to improve this. In addition, the method of classification of the subject item for the repair and replacement is necessary to be reorganized to be able to apply the standard of initial construction item of a building. Also, it is considered that a service standard which can reset the repair and replacement cycle based on status of a building with escape from the existing definite setup of the repair and replacement cycle through the management of background data of the repair and replacement is going to be necessary.

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.04a
• /
• pp.55-61
• /
• 2000

본 연구에서는 열화시스템의 교체정책을 결정할 때 열화에 의한 시스템의 성능의 저하로 인한 제품의 품질 특성치와 목표치(target value)와의 차이를 손실함수를 통해 비용으로 반영하여 교체정책을 제시하였다. 비용함수에는 검사비용, 교체비용, 손실비용이 포함되며, 이 비용들을 최소화하는 교체정책이 제시되었다. 또한 교체정책 결정 시 고려되는 열화에 의한 특성치의 변화, 검사비용, 열화추세 등의 변화에 따른 총비용의 변화와 상호관계를 실험을 통해서 관찰하였고, 실험결과 시스템의 특성에 따라 총비용을 최소화하는 최적검사주기가 존재함을 알 수 있다. 열화에 의한 특성치의 변화가 교체주기와 비용의 변화에 크게 영향을 주는 것으로 나타난 반면 검사비용은 정책결정에 큰 영향을 주지 않는 것으로 관측되었다. 손실함수의 도입을 통해 품질 특성치와 목표치와의 차이로 인한 비용을 줄일 수 있으며 이는 교체주기의 감소경향을 나타낸다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.456-457
• /
• 2008

본 논문은 계통보호 전송장치(PITR)의 교체기준 설정에 관한 연구이다. 본 논문에서는 PITR의 최적 교체주기를 찾기 위하여 다양한 시도를 하였다. 고장데이터로 고장 분포함수를 이용한 이론적인 수명주기 활용, 현장 전문가 의견, 제작사 전문가 경험 등을 종합하여 PITR의 최적 교체주기를 제안하였다.

• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.430-436
• /
• 1993

Due to the failure of the instrument and control devices of nuclear power plants caused by aging, nuclear power plants occasionally trip. Even a trip of a single nuclear power plant (NPP) causes an extravagant economical loss and deteriorates public acceptance of nuclear power plants. Therefore, the replacement of the instrument and control devices with proper consideration of the aging effect is necessary in order to prevent the inadvertent trip. In this paper we investigated the optimal replacement periods of the control computer's components of Wolsung nuclear power plant Unit 1. We first derived mathematical models for optimal replacement periods to the digital control computer's components of Wolsung NPP Unit 1 and calculated the optimal replacement periods analytically. We compared the periods with the replacement periods currently used at Wolsung NPP Unit 1. The periods used at Wolsung is not based on mathematical analysis, but on empirical knowledge. As a consequence, the optimal replacement periods analytically obtained and those used in the field show a little difference.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1171-1177
• /
• 2014

An electromagnetic shielding doorset must satisfy requirements associated with both mechanical strength/durability and electromagnetic shielding. Among the primary components of the doorset, a finger strip-a leaftype spring normally made of beryllium copper-is a core part to shield electromagnetic waves as well as to endure repetitive dry sliding friction. This study presented a reliability demonstration test method for the doorset system and, by a simple and simultaneous implementation, of the replacement interval of the finger strip. A rigorous evaluation for the qualification of maintenance or replacement interval is included in the reliability demonstration test of any series system that holds critical maintenance sub-units.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.447-451
• /
• 2019

This study were to investigate the scratches and replacement cycles of eyeglasses according to personal characteristics in daily life. The subjects were 58 people who voluntarily participated in this study. The replacement cycle of eyeglasses according to the contact of eyelashes with eyeglasses, type and the number of eyeglasses wiped on a day were analyzed. The statistical analysis were performed by X² test and Fisher's exact test. The average replacement cycle of the eyeglasses were longer females than males. The eyeglasses replacement cycle were significantly shorter when the eyelashes contacted the eyeglasses and when the eyeglasses were wiped using a tissue or clothes other than the eyeglasses towel. The coating film of the eyeglasses may be damaged by the convergence effect such as eyelashes or minor carelessness in daily life, and this study will continue to follow up on this result.