• Journal of Nutrition and Health
• /
• v.17 no.4
• /
• pp.245-252
• /
• 1984

The aim of the present experiment was to investigate the effects of anionization on the various stage of mice growth, the feeding level of diets, the switch - over effects, effects of plane of nutrition on growth of mice, the effects of method of ionization on growth of mice and associated breeding performance. Mice in polyethylene cages were placed on vinyl plate charged anion by an Electrical Ionizing Machine. At an early growing stages body weight gains of mice anionized were not different from the unionized group. The dietary intake did not affect significantly the body weight of mice 15- l7g. The growth of mice of 11.5-16.2g was not affected by ionization statistically, but the ionized group increased slightly. The switching over from the untreated to the ionization slightly depressed the ionized mice by 2.4g, the untreated switched over to ionization group by 2.28g as compared with the 3.29g for the untreated during the 4- day - feeding period. Plane of nutrition and ionization did not significantly affect the growth of mice of 7.1-15.8g when mice were fed high - protein and high - carbohydrate diets. The Common Ionization Method was appeared statistically superior to the Overnight - Ionization Method. The growth rate of the offspring of mice ionized prior to conception was found to be normal but the number of progeny was considerablly high.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.259-265
• /
• 2006

Small intestinal submucosa (SIS) consists of some growth factors which can stimulate cell activity, and PVA has been widely utilized in the area of wound dressing as hydrogel which is easy to be removed from wounds. In this study, native SIS sheets were coated with PVA by immersing them into 2, 4, and 10 wt% of PVA solution and then lyophilized on two type of molds to endow the prepared wound dressing with easy removal property from wounds. The mechanical properties were examined through tensile test. Moreover, enzymatic degradation, water uptake, and in vitro test were carried out to characterize the prepared SIS sheets. The tensile strength of the SIS sheets coated with PVA (PVA-SIS) were decreased, whereas the elongation were increased. Degradation ratio of the PVA-SIS sheets was decreased compare to native SIS. Water uptake ability was improved at 2 and 4 wt% of PVA. The degree of fibroblast attachment was lower than the native SIS sheets. In conclusion, this study suggests that the PVA coated SIS sheets have a potential for the applications of wound dressing and biodegradable injectable materials.

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.537-545
• /
• 2014

We conducted a study to access the effectiveness of glove and washing hands for the prevention of microbial contamination during the dental clinical practice. Microbial numbers at unwashed hands and gloves were $9.938{\time}10^3(CFU)/ml$, those at washed with soap were $9.44{\time}10^3CFU/ml$ And those at washed with a typical liquid soap including disinfectant, Dettol (Reckitt Benckiser, Slough, SL1 3UH, UK) were $6.58{\time}10^2CFU/ml$. In case of unwashed hand and hand washing with soap had similar microbial numbers and in case of hand washing with Dettol showed a rapid decrease of microbial number. Hand washing with Dettol was effective to prevent microbial contamination than hand washing with soap. Also microbial numbers in all case wearing gloves decreased. It showed effectiveness of gloves for prevention of microbial contamination. In addition to microbial numbers showed a tendency to increase from 3 hours on wearing gloves, the change of new gloves after 3 hours on wearing is necessary to minimize the danger of microbial contamination.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.914-919
• /
• 2004

When the motor is rotating, the torque and rpm are varying as the loads or the driving status connecting through reduction units are changing. On the contrary, one can monitor the changes of the loads or the driving status in the manner of measuring motor torque and rpm. There is a torque measuring method using the strain gauge and bridge circuit. But, because this is the contact method, it has the life time which is dependent on rotating velocity and used time. So this system demands on replacement of some Parts or whole system itself for maintenance. And this system is also relatively big and expensive, requiring preceding annoying process. In this paper, we are going to suppose non-contact method to measure torque and rpm using the Hall effects sensor For this we have made the planetary geared reduction motor with Hall sensors and with the monitoring system. The monitoring system displays the sensing data(torque, rpm) and calculated data( power) and also has the network capability with Bluetooth protocol. Our solution is much more inexpensive ;md simple method to measure torque and rpm than before.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.219-231
• /
• 2016

$^{99m}Tc$-DMSA planar scan that can analyze the functions of kidney quantitatively provides less information on a lesion than tomography scanning. Therefore, this study applied a high sensitivity all-purpose collimator that is sensitive to photonic signals to $^{99m}Tc$-DMSA and carried out a clinical scan with single photon emission computed tomography (SPECT). And diagnostic accuracy and time requirement of were analyzed to know the clinical usefulness of the applied scanning method. 10 subjects were intravenously injected with radiopharmaceutical product (1.0-1.2 MBq/kg) and scanned by a gamma camera with planar scanner (high resolution (HR)-mode, $256{\times}256$, 50 kcts/view, 4 image) and SPECT (HR / high sensitive (HS)-mode, $128{\times}128$, step and shoot, $180^{\circ}$, variable sec/angle, total 64 frame, OSEM reconstruction), respectively. The collected data was compared with an analysis program. The results showed that HS-mode SPECT detected total counts 1.8-5.6 times more than planar scan. Relative renal function evaluated based on the counts was not significantly different by two scanning methods (p=0.96) and it turned out that test time was shortened by 39% when HS-mode SPECT was used. Therefore, SPECT using HR, HS-mode collimator could analyze renal function more quantitatively than using planar scan and the former could diagnose the location information of a lesion more accurately than the latter as well as shortened test time requirement, which demonstrated the clinical usefulness of $^{99m}Tc$-DMSA renal SPECT using high sensitivity all purpose collimator.

• The Korean Journal of Pesticide Science
• /
• v.16 no.2
• /
• pp.187-193
• /
• 2012

Acute toxicity, water resolvability and short term reproduction test on Japanese medaka (Oriyzias latipes) for evaluating alachlor susceptibility to endocrine system were studied. Alachlor is known for suspected endocrine distruptors. As the results of tests, $LC_{50}$ (Median lethal concentration) was determined as 2.36 (1.994~2.805) mg/L, and test water replaced at 7 day intervals as its water resolvability was less than 20% in 7 days. The short term reproduction tests on Japanese medaka (Oriyzias latipes) were performed with a solvent control group, a treated group (alachlor concentrations of 0.02, 0.04, 0.11, 0.27, 0.68 ppm) and a positive control group (17 ${\beta}$ estradiol, 0.01, 0.1, 0.5 ppb). The number of spawning and embryo rates were declined in a alachlor-dose dependent manner, and the number of unfertilized eggs rates were in contrast increased depending on the concentrations. Further study should be needed to confirm whether the adverse effects may be effected by the concentrations. Additionally, alachlor was evaluated as a non-vitellogenin by the result of a test of significance of the vitellogenin content test for determination of the effect of estrogen among the endocrine disruptors.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.6
• /
• pp.747-761
• /
• 2011

This paper presents an investigation on the change in the statical behavior and the ultimate capacity of steel cable-stayed bridges after cable failure. Cable failure can occur due to fire, direct vehicle clash accidents, cable or anchorage fatigue, and so on. Moreover, the cable may be temporarily disconnected during cable replacement work. When cable failure occurs, the load, that was supported by the broken cable is first transferred to another cable. Then the structural state changes due to the interaction between the girder, mast, and cables. Moreover, it can be predicted that the ultimate capacity will decrease after cable failure, because of the loss of the support system. In this study, the analysis method is suggested to find the new equilibrium state after cable failure based on the theory of nonlinear finite element analysis. Moreover, the ultimate analysis method is also suggested to analyze the ultimate behavior of live loads after cable failure. For a more rational analysis, a three-step analysis procedure is suggested and used, which consisted of initial shape analysis, cable failure analysis, and live load analysis. Using this analysis method, an analytical study was performed to investigate the changes in the structural state and ultimate behavior of steel cable-stayed bridges.

• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.649-657
• /
• 2017

In this study, fatigue testing was carried out for long-term use of rail according to track type. From S-N curves for 50%~0.01% failure probability, the fatigue life of the long-term use rail for each track type was derived using the weight probability analysis technique on the experimental data. Because the rails used in the fatigue test have different cumulative tonnages, the number of repetitions was modified by averaging the cumulative tonnage. In addition, the bending stresses of rail bottoms, considering rail surface irregularities, track support stiffnesses and train speeds, were evaluated using the predicted rail bending stresses derived from existing studies. As a result, for rail fatigue life evaluation, the fatigue life of rail on the ballast track was found to be more than 200 million tons higher than the standard value for rail replacement. Also, the fatigue life of rail on concrete track is more than 300 million tons higher than that on ballast track. The Haibach rule is adaptable for the fatigue life evaluation of rail for stress range under fatigue limit.

• Archives of design research
• /
• v.17 no.1
• /
• pp.99-108
• /
• 2004

Metal tableware of korea had been used from former days along with own to rice bowl exclusive use, this metal tableware has our country characteristic identity from the country that do rice to chief food to unique thing. This by recent publication we individual and peculiar ours create may. Hab, Yonyu, Omok, Okbalri of modeling of our country metal rice bowl are 4 kinds greatly. First is that is all lid in our country's metal rice bowl by 3 greatly to cultural meaning that is filled in modeling. Second, it is that there is man and woman old and the young official business while divide man and woman old and the young in our country's metal rice bowl, third, that size changes by other rice bowl according as age increases point. And item that cause definite effect in figurative feature of metal rice bowl is [ Existence and nonexistence of hoof ], [ Oral narration department's shape ], [ Reverence of oral narration belonging / Ratio of Body's height ], and [ Reverence of oral narration belonging / Ratio about Body maximum ] of it 4 be. This research finds identity of our country's design and it is basic research about that is wished to graft together in several Land of Supreme Happiness illuminating in several angles with our country characteristic metal rice bowl.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.5_6
• /
• pp.232-238
• /
• 2003

Traditional operating systems use a virtual memory to provide users with a bigger memory than a physical memory. The virtual memory augments the insufficient physical memory by the swap device. Since disks are usually used as the swap device, the cost of a page fault is relatively high compared to the access cost of the physical memory. Recently, numerous papers have investigated the Network RAM in order to exploit the idle memory in the network instead of disks. Since today's distributed systems are interconnected with high-performance networks, the network latency is far smaller than the disk access latency In this paper we design and implement the Network RAM using block device driver on Linux. This is the first implementation of the Network RAM on Linux. We propose the new reliability method to recover the page when the other workstation's memory is damaged. The system using the Network RAM as the swap device reduces the execution time by 40.3% than the system using the disk as the swap device. The performance results suggest that the new reliability method that use the processor more efficiently has the similar execution time with others, but uses smaller server memory and generates less message traffic than others.