• Journal of the Korean Arthroscopy Society
• /
• v.12 no.1
• /
• pp.32-39
• /
• 2008

Purpose: To evaluate the effectiveness of MRI after ACL reconstruction with femoral tunnel at 10 o'clock position. Materials and Methods: MRI findings of 29 patients after ACL reconstruction using hamstring tendon autograft were evaluated. The mean period from operation to MRI was 18.9 months($7{\sim}40$ months). Signal intensity, morphology and continuity of graft, femoral insertion, graft angle, roof impingement, cross pin breakage and position were evaluated. Those findings were compared with KT-2000, Lysholm knee score and pivot shift test. Results: There was no significant correlation between signal intensity of graft and the duration to MRI. Most common pattern of the morphology was straight, and the continuity was well-preserved. 13 cases of femoral tunnel insertion were zone 4 and 16 were zone 3. There were no roof impingement. 10 cases showed cross pin breakages, of which 5 were found at the outside of distal femoral posterior cortex. 9 showed cross pin directed posteriorly in axial view. There was no significant correlation between clinical results and cross pin breakage. Conclusion: MRI examinations after ACL reconstructions are useful to evaluate the graft status, position of the graft and cross pins. Since the direction of the cross pin is important especially in 10 o'clock femoral position, care should be taken to avoid cross pin breakage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.557-564
• /
• 2000

A microstrip band-pass filter using cross-coupled resonators is designed and studied experimentally. The cross-coupled microstrip hairpin resonator filters exhibit ripples in both passband and stopband. These ripples can improve both frequency selectivity and insertion loss. The cross-coupled filters are not only simple and compact in configuration, but also have great flexibility to form filters into a variety of size. In this paper, a microstrip band-pass filter using cross-coupled resonators is designed at the center frequency of 1.8GHz with bandwidth of 5.0% using Ensemble software. The experimental results show that the bandwidth is about 4.53% at 1.8GHz.

• Journal of Veterinary Clinics
• /
• v.29 no.2
• /
• pp.198-201
• /
• 2012

A one-month-old, male Hanwoo calf was presented to Chonbuk Animal Medical Center with non-weight bearing lameness on its right hindlimb. The radiograph and CT scan showed a Salter-Harris III fracture at the distal tibia. Following open reduction, the fracture was stabilized by cross-pins. A temporal external skeletal fixator was used as an additional support for 5 weeks. 5 weeks after surgery, bone fracture had successfully healed with no complication. At 2 years after surgery, the calf could walk almost normally although intermittent weight-bearing lameness after active exercise. This is a rare case that the combined use of temporal external fixation and cross-pins fixation was sufficiently effective for treating a distal tibial physeal fracture in a calf.

• 대한관절경학회:학술대회논문집
• /
• 2008.04a
• /
• pp.32-32
• /
• 2008

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1178-1183
• /
• 2004

In this paper, a novel microstrip patch antenna with switchable polarization is proposed. The proposed antenna has a simple structure, consisting of a square radiating patch, a pair of L-type spur-lines, and a microstrip line feed. It can produce either linear polarization or circular polarization by setting the diode on or off From the measured results, low cross polarization levels when operated in the linear polarization, and good axial ratios in the circular state have been observed.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.11a
• /
• pp.60-63
• /
• 2004

A new PIV technique was developed for decreasing optical error which was created during simultaneous measurements of velocity fields at a wall-normal plane and wall-parallel plane by a plane PIV and a Stereoscopic PIV system. The two Nd:Yag laser systems and three CCD cameras were. synchronized to obtain instantaneous velocity fields at the same time. To avoid optical noise at the crossing line by the two laser light sheets, a new optical arrangement using polarization was applied. The obtained velocity fields show the existence of hairpin packet structure vividly and the idealized hairpin vortex signature is confirmed by experiment.

• Journal of the Korean Society of Visualization
• /
• v.2 no.1
• /
• pp.32-38
• /
• 2004

A new PIV technique was developed for decreasing optical error which was created during simultaneous measurements of velocity fields at a wall-normal plane and wall-parallel plane by a plane PIV and a Stereo-PIV systems. For experimental study, two different Reynolds number based on momentum thickness, Re$_{ =514 and 934 were generated in a blowing type wind tunnel under the condition of zero pressure gradient. The two Nd:Yag laser systems and three CCD cameras were synchronized. to obtain instantaneous velocity fields at the same time. To avoid optical noise at the crossing line by the two laser light sheets, a new optical arrangement using polarization was applied. The obtained velocity fields show the existence of hairpin packet structure vividly and the idealized hairpin vortex signature is confirmed by experiment.

• Journal of Veterinary Clinics
• /
• v.29 no.6
• /
• pp.502-505
• /
• 2012

An 8-month-old, 3.5 kg intact female Toy Poodle was presented for non-weight-bearing lameness on left hindlimb. In radiological testing, left proximal tibal type II Salter-Harris physeal fracture and fibular fracture were seen. Following open reduction, the fracture was stabilized with cross-pins, tension band wires, and a hinged transarticular external skeletal fixator (HTAESF). The range of the HTAESF was increased to $25^{\circ}$ at 7 days postsurgery and to $70^{\circ}$ at 14 days post-surgery. The HTAESF was removed 3 weeks after surgery. At 6 weeks post-surgery, the fracture was successfully healed with no complications and the patient recovered a normal gait. Seven months post-surgery, the patient had a normal gait and a normal stifle joint range of motion compared to the contralateral normal limb. This is a case in which the combined use of cross-pins, tension band wires, and HTAESF was successful for treatment of a proximal tibial physeal fracture in a dog. It is thought that these methods are beneficial for stability of fracture site and recover of joint's normal range of motion through early joint movement.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.3
• /
• pp.28-34
• /
• 2001

To improve the skirt characteristic of the high-temperature superconducting filter, we proposed a structure of cascading two independent hairpin-comb filters with an identical frequency response. Resonators of the cascaded filter are arranged in the shape of a diamond so that it minimizes the cross coupling between the resonators. This structure can be used effectively to improve the skirt characteristic of the filter in limited area of a circular wafer. The simulated skirt characteristic of the 18 pole cascaded filter is more than 40dB/MHz attenuation below and above the passband.

• Composites Research
• /
• v.33 no.5
• /
• pp.296-301
• /
• 2020

Laminated composite materials have excellent in-plane properties, but are vulnerable in thickness directions, making it easy to delamination when bending and torsion loads are applied. Thickness directional reinforcement methods of composite materials that delay delamination include Z-pinning, Stitching, Tufting, etc., and typically Z-pinning and Stitching method are commonly used. The Z-pinning is reinforcement method by inserting metal or carbon pin in the thickness direction of prepreg, and the conventional stitching process is a method of reinforcing the mechanical properties in the thickness direction by intersecting the upper and lower fibers on the preform. In this paper, I-fiber stitching method, which complement and improve weakness of Z-pinning and Stitching method, was proposed, and the static strength of composite single-lap joints using I-fiber stitching process were evaluated. The single-lap joints were fabricated by a co-curing method using an autoclave vacuum bag process. The thickness of the composite adherend was fixed, and 5 types of specimens were manufactured with varying the stitching pattern (5×5, 7×7) and angle (0°, 45°). From the test, the failure load of the specimen reinforced by the I-fiber stitching process was increased by up to 143% compared to that of specimen without reinforcement.