• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.65-67
• /
• 2006

광통신이 발달하면서 보다 빠른 정보전송을 할 수 있지만 다른 전송매체와 마찬가지로 장거리 전송 시 손실이 발생하고 이러한 문제의 해결책으로 광 증폭기의 필요성이 대두 되었다. 기존의 광신호 증폭기에서는 광 신호를 전기신호 변환한 후 증폭하고 다시 증폭된 전기신호를 광신호로 변환하는 과정과 복잡한 구조는 전송시스템의 병목 문제를 유발하였다. 이러한 문제점을 해결할 수 있는 순수 광신호 증폭시스템인 어븀첨가광섬유증폭기 (EDFA)를 제작하고 EDFA의 이득평탄화를 위하여 이득평탄화 필터로 MLPFG를 제작하여 적용하였다. 제작된 EDFA는 20dB 이상의 신호 증폭을 보였다.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.243-249
• /
• 2007

I propose the excess noise suppressed optical sensor network using optical CDMA with gain saturated optical amplifier in order to increase number of sensors simultaneously connected to network. Simulation analyses confirm that the maximum number of sensors simultaneously connected to the optical sensor network can be largely increased by increasing the gain of gain saturated optical amplifier owing to the pression of access noises with the assignment of sweeping frequency of optical sensors within 10MHz. In the case of the requested SNR of 20dB and the sweeping frequency of 10MHz, the maximum number of sensors simultaneously connected to the optical sensor network can be increased four times as many as the conventional system.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.66-73
• /
• 2007

The various output characteristics of a pulsed Ti:sapphire laser oscillator with a plane-parallel resonator, pumped longitudinally by the second harmonic wave of a Nd:YAG laser, and the output of a Ti:sapphire laser amplifier operated along the single path of the oscillator beam were investigated and analyzed. In the case of the oscillator, we measured the spectrum, the pulse buildup time, the temporal duration time of the pulse, and the output energy according to the variation of the pumping energy, resonator length, and the reflectance of the output coupler. And, in the case of the amplifier, we investigated and analyzed the output energy of the amplifier as a function of the time difference between the two pump beams of the oscillator and the amplifier, the pumping energy of the oscillator, and the pumping energy of the amplifier When pump energies of both the oscillator and the amplifier were 18 mJ/pulse, we could find that the output energy of the amplifier increased linearly and gradually up to the time difference of 35 ns. Finally, we determined that the slope efficiencies of the oscillator and the amplifier were 23.5 % and 11.6 %, respectively.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.180-181
• /
• 2001

이 논문은 채널당 1Gbps로 동작하는 10채널 광 수신기를 0.25$mu extrm{m}$ CMOS공정을 이용하여 설계한 것이다. 광 수신기는 크게 2부분으로 나눠지는데 첫 번째 부분은 입력된 전류 신호를 전압 신호로 변환시켜주는 역할을 하는 트랜스임피던스 전치증폭기이고, 다음 부분은 원하는 디지털 레벨로 풀스윙 할 수 있도록 하는 후치증폭기이다. 전치증폭기의 출력 전압은 스윙폭에 무관하게 그 다음 단에서 적당한 디지털 레벨 데이터로 변환되어야한다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.34-35
• /
• 2003

광통신 분야에서 광신호의 장거리 전송에 따른 세기 감소를 보강하기 위해 쓰이는 광섬유증폭기는 현재 1.3 $\mu\textrm{m}$ 대역, 1.45 $\mu\textrm{m}$ 대역 및 1.5 $\mu\textrm{m}$ 대역에서 작동하는 희토류 이온 첨가 광섬유 광증폭기가 개발되어 쓰이고 있다. 한편 ETRI에서는 기존 광통신에 쓰이는 광 증폭기에 추가해 더 넓은 파장대를 광통신에 쓸 수 있도록 하는 새로운 파장대역의 광 증폭기 구현을 가능케하고 나아가 광통신 용량을 기존보다 휠씬 더 큰 10 Tbps급 이상으로 늘이기 위해 1.6 $\mu\textrm{m}$ 파장대인 U 밴드대 광증폭기용 광섬유인 Pr 첨가 셀레나이드 유리 조성의 신소재를 개발하였는데, 본 연구에서는 Ge-Sb-Ga-Se 계열의 Pr 첨가 셀레나이드 유리의 굴절률을 분광타원 법 (spectroscopic ellipsometry)을 사용하여 결정하였다. (중략)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1071-1083
• /
• 1991

In this paper, we describe the design and realization of optical preamplifier with InGaAs APD and GaAs MESFET. Optical preamplifier which is three stage trans-impedance circuit is analyzed in detail and realized in microstrip circuits. With the kmowledge of the InGaAs, GaAs MESFET and BJT, the performance of the optical is predicted by computer simulation and the theoretical predictions are compared with the experimental results. The designed hybrid MIC optical preamplifier exhibits a bandwith of 380MHz and a receiver sensitivity of -40. 6dBm at $1.55{\mu}m$ wavelength when operating at 565Mb/s with BER of $10^{-9}$.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.326-332
• /
• 1994

Performance of soliton based long-haul optical communication system with in-line optical amplifier repeaters are evaluated numerically. To reduce the optical amplifier noise, the amplifier gain is increased and the post amplifier loss is included. By theoretical calculation with 1480 nm co propagating pump, 7 dB amplifier gain and operating the amplifier 1 dB in compression, the spontaneous emission factor can be reduced from 2.37 to 1.45 by increasing the pump power from 3.71 to 11.53 mW and increasing the post amplifier loss from 0 to 10 dB. Then, power penalty can be reduced from 4.09 to 1.20 dB for 8,000'km transmission and the maximum transmission distance is 14,890 km. ,890 km.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.515-520
• /
• 2003

Characteristics of an amplifier with repetition rate of a few KHz is investigated. The continuous flash lamp pumped Nd:YAG laser head is used as an amplifier. The thermally induced birefringence of the laser medium is compensated and the depolarization is reduced to 5% in a double-pass amplifier. The amplification factor of a four pass amplifier reaches to about 3.2 at the repetition rate 5-10 KHz and the pulse width is lengthened from 40 ns to 48 ns.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.58-62
• /
• 1997

A new, simple lasing loop configuration employing a fiber grating was proposed and demonstrated for all-optical gain control of erbium-doped fiber amplifier. The lasing loop was designed such that the fiber grating acts as a notch filter to cutoff the lasing light as well as selects the lasing wavelength. The operating gain was clamped to the same level as the loop loss and it could be varied with a tunable directional coupler in the loop. It is believed that this type of gain-controlled erbiumdoped fiber amplifier can have several advantages when used in wavelength-division-multiplexed transmission systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.117-117
• /
• 2013

레이저 레이더용 시력안전파장대 고출력 광펄스 생성을 위한 광원으로 MOPA 구도로 광섬유 레이저를 제작 하였다. MOPA 기반 펄스 광섬유 레이저는시력 안정 파장대인 1,550 nm 대역 파장을 갖고 펄스폭이 2 ns 이하이며 반복률이 30~240 kHz 가변 가능하다. 광섬유 증폭단에서 1단 증폭기는 저잡음용 코어 펌핑 방식의 증폭기로 구현하였으며, 2단 증폭기는 중출력 증폭기로 코어 펌핑구조에 후방향 펌핑 구도로 설계하였다. 3단 증폭기는 최종목표인 2ns 이하의 펄스 폭 및 25 kWp 이상의 첨두출력을 달성하기 위하여 클래딩 펌핑 방식의 고출력 광증폭기로 구현하였다.