• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.132-139
• /
• 2018

The photosynthetic rate is an indicator of the growth state and growth rate of crops and is an important factor in constructing efficient production systems. The objective of this study was to develop a canopy photosynthetic rate model of romaine lettuce using the three variables of $CO_2$ concentration, light intensity, and growth stage. The canopy photosynthetic rates of the lettuce were measured at five different $CO_2$ concentrations ($600-2,200{\mu}mol{\cdot}mol^{-1}$), five light intensities ($60-340{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$), and four growth stages (5-20 days after transplanting) in three closed acrylic chambers ($1.0{\times}0.8{\times}0.5m$). A simple multiplication model expressed by multiplying three single-variable models and the modified rectangular hyperbola model including photochemical efficiency, carboxylation conductance, and dark respiration, which vary with growth stage, were also considered. In validation, the $R^2$ value was 0.923 in the simple multiplication model, while it was 0.941 in the modified rectangular hyperbola model. The modified rectangular hyperbola model appeared to be more appropriate than the simple multiplication model in expressing canopy photosynthetic rates. The model developed in this study will contribute to the determination of an optimal $CO_2$ concentration and light intensity with the growth stage of lettuce in plant factories.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.161-166
• /
• 2015

To determine the adequate levels of light intensity and $CO_2$ concentration for mango grown in greenhouses, quantitative measurements of photosynthetic rates at various leaf positions in the tree are required. The objective of this study was to develop two-variable leaf photosynthetic models of Irwin mango (Mangifera indica L. cv. Irwin) using light intensity and $CO_2$ concentration at different leaf positions. Leaf photosynthetic rates at different positions (top, middle, and bottom) were measured by a leaf photosynthesis analyzer at light intensities (0, 50, 100, 200, 300, 400, 600, and $800{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) with $CO_2$ concentrations (100, 400, 800, 1200, and $1600{\mu}mol{\cdot}mol^{-1}$). The two-variable model consisted of the two leaf photosynthetic models expressed as negative exponential functions for light intensity and $CO_2$ concentrations, respectively. The photosynthetic rates of top leaves were saturated at a light intensity of $400{\mu}mol{\cdot}^{-2}{\cdot}s^{-1}$, while those of middle and bottom leaves saturated at $200{\mu}mol{\cdot}^{-2}{\cdot}s^{-1}$. The leaf photosynthetic rates did not reach the saturation point at a $CO_2$ concentration of $1600imolmol^{-1}$. In validation of the model, the estimated photosynthetic rates at top and bottom leaves showed better agreements with the measured ones than the middle leaves. It is expected that the optimal conditions of light intensity and $CO_2$ concentration can be determined for maximizing photosynthetic rates of Irwin mango grown in greenhouses by using the two-variable model.

• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.43-51
• /
• 2020

For developing a canopy photosynthesis model, an efficient method to measure the photosynthetic rate in a growth chamber is required. The objective of this study was to develop a method for establishing canopy photosynthetic rate curves of romaine lettuce (Lactuca sativa L.) with light intensity and CO₂ concentration variables using controlled growth chamber. The plants were grown in plant factory modules, and the canopy photosynthesis rates were measured in sealed growth chambers made of acrylic (1.0 × 0.8 × 0.5 m). First, the canopy photosynthetic rates of the plants were measured, and then the time constants were compared between two application methods: 1) changing light intensity (340, 270, 200, and 130 μmol·m^-2·s^-1) at a fixed CO₂ concentration (1,000 μmol·mol^-1) and 2) changing CO₂ concentration (600, 1,000, 1,400, and 1,800 μmol·mol^-1) at a fixed light intensity (200 μmol·m^-2·s^-1). Second, the canopy photosynthetic rates were measured by changing the light intensity at a CO₂ concentration of 1,000 μmol·mol^-1 and compared with those measured by changing the CO₂ concentration at a light intensity of 200 μmol·m^-2·s^-1. The time constant when changing the CO₂ concentration at the fixed light intensity was 3.2 times longer, and the deviation in photosynthetic rate was larger than when changing the light intensity. The canopy photosynthetic rate was obtained stably with a time lag of one min when changing the light intensity, while a time lag of six min or longer was required when changing the CO₂ concentration. Therefore, changing the light intensity at a fixed CO₂ concentration is more appropriate for short-term measurement of canopy photosynthesis using a growth chamber.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.268-275
• /
• 2017

The photosynthetic rates of crops depend on growth environment factors, such as light intensity and temperature, and their photosynthetic efficiencies vary with growth stage. The objective of this study was to compare two different models expressing canopy photosynthetic rates of romaine lettuce (Lactuca sativa L., cv. Asia Heuk romaine) using three variables of light intensity, temperature, and growth stage. The canopy photosynthetic rates of the plants were measured 4, 7, 14, 21, and 28 days after transplanting at closed acrylic chambers ($1.0{\times}0.8{\times}0.5m$) using light-emitting diodes, in which indoor temperature and light intensity were designed to change from 19 to $28^{\circ}C$ and 50 to $500{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. At an initial $CO_2$ concentration of $2,000{\mu}mol{\cdot}mol^{-1}$, the canopy photosynthetic rate began to be calculated with $CO_2$ decrement over time. A simple multiplication model expressed by simply multiplying three single-variable models and a modified rectangular hyperbola model were compared. The modified rectangular hyperbola model additionally included photochemical efficiency, carboxylation conductance, and dark respiration which vary with temperature and growth stage. In validation, $R^2$ value was 0.849 in the simple multiplication model, while it increased to 0.861 in the modified rectangular hyperbola model. It was found that the modified rectangular hyperbola model was more suitable than the simple multiplication model in expressing the canopy photosynthetic rates affected by environmental factors (light Intensity and temperature) and growth factor (growth stage) in plant factory modules.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.473-473
• /
• 2022

일차생산은 화학합성 또는 광합성에 의하여 무기탄소가 유기물질로 전환되는 것을 의미한다. 수중의 일차생산자는 광합성을 통하여 유기물을 해당 수역에 공급하는 기능을 수행하며, 이는 수역의 상위 먹이 단계의 총생산력을 결정하는 주요 구성원이다. 한강은 하류로 갈수록 유속이 느리지만 수심이 깊어져 부착조류가 서식하기 쉽지 않은 환경이기에 대부분의 일차생산자는 식물플랑크톤이다. 과거 1994년 이후로 2017년까지 5년 간격으로 총 6회 연구된 결과, 해당 하천의 부영양화가 여름철에 발생하였다. 팔당댐 방류량과 지류의 유입에 의한 유기물 증가로 하천 내 1차 생산의 기여도가 증가하고 있으며, 이는 유기물 근원을 판정하여 수질오염에 대한 처리대책을 위해 지속적으로 연구가 필요하다. 따라서 본 연구는 한강본류에서 식물플랑크톤의 일차생산력을 조사하고, 유기물의 분해속도를 측정하여 당해 유역의 유기물 수지를 추정하여 한강 고유의 특성을 파악하여 부영양화에 의한 유기물 증가로 발생할 수 있는 수질오염을 예측하고자 한다. 조사유역은 한강의 팔당댐 방류구로부터 신곡수중보까지 전 구역 중 총 12개의 지점을 선정하였다. 기간은 2021년 5월부터 2022년 3월까지 계절별 2회로 총 8회 조사를 실시하였으며, 한강본류에서는 식물플랑크톤의 산소소비법을 통해 일차생산력과 유기물 분해속도를 조사하여 내부기원 유기물을 측정하였고, 한강본류로 유입되는 4개의 유입하천에서는 COD를 조사하여 외부기원 유기물을 측정하여 한강에서 발생하는 총유기물량을 산정하였다.

• Horticultural Science & Technology
• /
• v.29 no.3
• /
• pp.211-216
• /
• 2011

This study was carried out to clarify precise $CO_2$ demands of paprika plants (Capsicum annumm L.) by measuring photosynthesis rates of the leaves in high, low positions, and the $CO_2$ consumption of a whole plant in a large sealed chamber. A photosynthesis measuring system (LI-6400) was used to measure the photosynthetic rates of the leaves located in different positions. A large sealed chamber that can control inside environmental factors was developed for measuring $CO_2$ consumption by a whole paprika plant. With increase of radiation, photosynthetic rates of the leaves in higher position became larger than those in lower position. The $CO_2$ consumption by the plant was estimated by using decrement of $CO_2$ concentration from initial level of 1500 ${\mu}mol{\cdot}mol^{-1}$ in the chamber with increase of integrated radiation. A regression model for estimating $CO_2$ consumption by the plant (leaf area = 7,533.4 $cm^2$) was expressed with integrated radiation (x) and was suggested as $y=-0.06234+3.671^*x/(2.589+x)$ ($R^2=0.9966^{***}$). The photosynthetic rate of the whole plant measured in the chamber was 3.4 ${\mu}mol\;CO_2{\cdot}m^{-2}{\cdot}s^{-1}$ under 300 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ light intensity, which is in-between photosynthetic rates of the leaves in high and low positions. For this reason, some differences between required and supplied $CO_2$ amounts in greenhouses might occur when depending too much on photosynthetic rates of leaves. Therefore, we can estimate more accurately $CO_2$ amount required in commercial greenhouses by using $CO_2$ consumption model of a whole plant obtained in this study in addition to leaf photosynthetic rate.

• 한국해양학회지
• /
• v.26 no.2
• /
• pp.108-116
• /
• 1991

A production model was constructed by combining the production rate and biomass of Sargassum confusum measured at monthly intervals on the coast of Ohori, Korea, to estimate the algal production for a given period. The production for a certain period, e.g., for a year (P/SUB yr/), was calculated from the equation: P/SUB yr/ = .int.P/SUB t/$.$B/SUB t/dt, where pl and Bl are the production rate and biomass at time t. P/SUB l/ was considered as a function of temperature and light. Photosynthesis-Irradiance curves obtained from the in situ experiments were applied for P/SUB l/ Temperature and light intensity can be expressed as periodic functions of time (T, L=f(t)). Diurnal values of water temperature and light intensity at 3 m depth where S. confusum mainly found were substituted into the equation of P/SUB l/. Simulations using our models show that temperature was one of the most sensitive factors operating on the primary production. Thirty percent decrease of light intensity by cloud cover was estimated to decrease the annual production by 5%.

• Korean Journal of Ecology and Environment
• /
• v.40 no.1
• /
• pp.61-71
• /
• 2007

The photosynthetic characteristics and primary production by phytoplankton in open waters of two wetlands (the Banwol and the Donghwa wetland) of Sihwa Constructed Wetland with different water chemistry were investigated to provide the information for the wetland management considering the water treatment efficiency. During the study period (from March to October, 2005) the primary productivity in open waters ranged from 481 to 11,275 mgC $m^{-2}$ $day^{-1}$, which is very high compared with the eutrophic level of 600mgC $m^{-2}$ $day^{-1}$. From the analysis of the photosynthesis-irradiance (P-I) model parameters, the photosynthetic characteristics may be affected by different concentration and ratio of nutrient (N and P) between two wetlands. Assimilation number (AN) was higher in the Donghwa wetland (average AN: 8.5gC $gChl^{-1}$ $hr^{-1}$) with high P and low N/P ratio than the Banwol wetland (average AN: 5.8gC $gChl^{-1}$ $hr^{-1}$) with high N and high N/P ratio. This result indicates that AN may be concerned with phosphorus than nitrogen and low NIP ratio. Positive correlation (R=0.81) was observed between the initial slope and AN, implying that AN was high in case of phytoplankton having more active photosynthesis ability under low light. On the other hand, maximum photosynthesis (Pmax) was related positively with chlorophyll a concentration showing correlation coefficient of 0.47. In this study, considering the high primary production through phytoplankton photosynthesis in open waters of Sihwa Constructed Wetland, the produced organic matter by phytoplankton may affect the water quality within wetland and its efficiency of water treatment. Also, the photosynthetic characteristics may be affected by different nutrient enrichment (especially phosphorus) of wetlands. This study suggests that the production by phytoplankton and its characteristics in open water of constructed wetland for water treatment should be considered to improve the removal efficiency of organic matter.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.401-409
• /
• 2021

This study aimed to estimate the photosynthetic capacity of tomato plants grown in a semi-closed greenhouse using temperature response models of plant photosynthesis by calculating the ribulose 1,5-bisphosphate carboxylase/oxygenase maximum carboxylation rate (V_cmax), maximum electron transport rate (J_max), thermal breakdown (high-temperature inhibition), and leaf respiration to predict the optimal conditions of the CO₂-controlled greenhouse, for maximizing the photosynthetic rate. Gas exchange measurements for the A-C_i curve response to CO₂ level with different light intensities {PAR (Photosynthetically Active Radiation) 200µmol·m^-2·s^-1 to 1500µmol·m^-2·s^-1} and leaf temperatures (20℃ to 35℃) were conducted with a portable infrared gas analyzer system. Arrhenius function, net CO₂ assimilation (A_n), thermal breakdown, and daylight leaf respiration (R_d) were also calculated using the modeling equation. Estimated J_max, A_n, Arrhenius function value, and thermal breakdown decreased in response to increased leaf temperature (> 30℃), and the optimum leaf temperature for the estimated J_max was 30℃. The CO₂ saturation point of the fifth leaf from the apical region was reached at 600ppm for 200 and 400µmol·m^-2·s^-1 of PAR, at 800ppm for 600 and 800µmol·m^-2·s^-1 of PAR, at 1000ppm for 1000µmol of PAR, and at 1500ppm for 1200 and 1500µmol·m^-2·s^-1 of PAR levels. The results suggest that the optimal conditions of CO₂ concentration can be determined, using the photosynthetic model equation, to improve the photosynthetic rates of fruit vegetables grown in greenhouses.