• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.73-78
• /
• 2007

In this study, we reviewed the variations of GSD, line rate of a electro-optical payload caused by the changes of operational altitude and attitude of a satellite by applying design parameters of the EC6 which is under development. we also reviewed adjustable increments/decrements of line_rate which are limited by CEU(Camera Electronic Unit) design and then the effect on the MIF(Modulation Transfer Function) performance due to the un-synchronization between line_rate of EOS and ground scan velocity of the satellite based on the design parameters of CEU to show that CEU design is appropriate in terms of line_rate control of EOS.

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.324-330
• /
• 2022

We measured the Dill and Mack model parameters that determine the exposure and development characteristics of photoresists, respectively. First, photoresist samples were prepared while altering the exposure dose, and changes in transmittance were measured. Analyzing these results, the Dill model parameters A, B, and C were determined. In particular, the exact solution of the Dill model equation was used to determine the C parameter. In addition, changes in thickness were measured as a function of development time for different exposure doses, and the Mack model parameters R_min, R_max, a, and n were determined using the results. We also determined parameter values for the reduced Mack model that uses only three parameters, R_min, R_max, and n. The root mean square error between the model predictions and the measured values for the photoresist thickness was found to increase slightly compared to the case using the original Mack model with four parameters.

• Korean Journal of Optics and Photonics
• /
• v.9 no.5
• /
• pp.348-352
• /
• 1998

By employing the Berreman's backflow model, we investigated the effect of liquid crystal parameters on the optical switching characteristics of a bistable twisted-nematic liquid crystal cell. We found that d/p is the most important parameter for high speed operation.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.251-257
• /
• 2013

The influences of Methotrexate as fluorophor, scatterer, absorber in turbid material by light scattering were interpreted for the scattered fluorescence intensity and wavelength, it has been studied the molecular properties by laser induced fluorescence spectroscopy. It has been found that the effects of optical properties in scattering media by the optical parameters((${\mu}_s$, ${\mu}_a$, ${\mu}_t$). The value of scattering coefficient ${\mu}_s$ is large by means of the increasing particles of L-${\alpha}$-Phosphatidylcholine, it has been found that the slope decays exponentially as a function of depth from laser source to detector. It may also aid in designing the best model for oil chemistry, laser medicine and application of medical engineering.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.1019-1022
• /
• 2012

Integral imaging is a promising technology for 3D imaging and display. Many parameters affect the performance of 3D integral imaging systems. Enhanced system performance is acquired by optimization of these system parameters with respect to defined performance metrics. In this paper, we present an approach to optimize the performance of 3D integral imaging system in terms of performance metrics under fixed resource constraints. In this analysis, system parameters such as lens numerical aperture, pitch between image sensors, the number of image sensors, the pixel size, and the number of pixels are determined to optimize performance metrics. Wave optics is utilized to describe the imaging process.

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.417-422
• /
• 1998

In this paper we introduce a method to optimize panel parameters and drive signals in a matrix-adressed bistable twsited-nematic (BTN) liquid crystal display (LCD) panel. We measured the effect of data pulses on optical switching characteristics in a BTN LC cell to model the effect theoretically. We introduce a weighting function to model the effect of data pulses on the switching energy as a function of time. Once the weighting function is known, we can estimate the maximum number of lines for multiplexing operation at a given frame rate by calculating the minimum data pulse width. By characterizing a unit cell as we change panel parameters (for example, d/p ratio), we can optimize parameters for high-speed operation. We found that our theoretical predictions agree very well with experimental results.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.302-303
• /
• 2005

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.54-55
• /
• 2000

매질의 성능이 이상적이라 가정하고, 여러 가지 시스템 파라미터로 2진 홀로그램을 저장하는 경우에 있어서, 얻을 수 있는 면적 저장밀도와 다중화 횟수를 산출하고 비교하였다. 이 논문의 결과들은 새로운 디스크형 3차원 홀로그래픽 메모리[1-3]를 연구하거나 매질을 개발함에 있어서 비교 지표로 사용될 수 있다.(중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.07a
• /
• pp.226-227
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1229-1235
• /
• 2011

Fatigue tests were conducted on the aluminum alloy, A7075-T6 to determine the most reliable fretting fatigue damage parameter. Specimens with grooves were used, so that either fretting fatigue crack at the pad/specimen interface or plain fatigue crack at the groove could be nucleated, depending on the pad pressure. Both the crack nucleation location and initial crack orientation were examined using optical microscopy, and the results were used to assess the reliability of the various fretting fatigue damage parameters that have been most commonly used in the literature. Finite element analysis was employed to obtain the stress and strain data of the specimen, which were needed to estimate the parameter values and the orientation of the critical plane. It was revealed that both the Fatemi.Socie and McDiarmid parameters, which assume shear-mode fatigue cracking, are the most reliable.