• Transactions of the Society of Information Storage Systems
• /
• v.8 no.2
• /
• pp.72-77
• /
• 2012

The demand for the laptop computer has been increased day by day and most of users ask quiet computer and devices to work in comfortable environment. One of the devices which generate acoustic noise is an external ODD. Unlike the internal ODD, the external ODD is easy to emit noise because it runs outside of the computer and also it is packed with a thin plastic covers. As the disk rotates, vortex flow is generated inside of the cavity due to various and complicated mold parts of the cover. In addition, there is a gap between the disk tray and the upper/lower cases, through which the air flows as well as the noise leaks. In this study, we have proposed how to reduce the acoustic noise of an external ODD using numerical and experimental analysis. The pressure fluctuations and turbulent kinetic energy distributions are calculated for the developed model. The results show that the sound pressure level is reduced by 2.3dB through simple modifications of ribs of the top cover, which remove or suppress flow instabilities inside of the cavity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.154-154
• /
• 2015

최근에 백색 발광 소자와 조명 장치에 응용하기 위하여 희토류 이온이 도핑된 산화물 형광체의 제조에 많은 노력이 경주되고 있다. 본 연구에서는 $Eu^{3+}$ 이온이 첨가된 $La_2MoO_6$ 형광체를 고상반응법을 사용하여 합성하였다. $La_2MoO_6:Eu^{3+}$ 형광체 분말 시료는 활성체 $Eu^{3+}$ 이온의 함량을 0, 0.01, 0.05, 0.10, 0.15, 0.2 mol로 변화시켜 볼밀과 건조 작업을 거쳐 $400^{\circ}C$에서 3시간 동안 하소 공정과 $1100^{\circ}C$에서 5시간 동안 소결 공정을 수행하여 합성하였다. 흡광 스펙트럼의 경우에, 양이온 $Eu^{3+}$와 음이온 $O^{2-}$ 사이의 전하 전달 밴드에 의해 250~370 nm 영역에 폭넓게 발생한 흡광 신호와 370~450 nm 파장 영역에 발생한 다수의 약한 $Eu^{3+}$ 이온의 흡광 스펙트럼으로 구성되었다. 발광 스펙트럼의 경우에, 파장 333 nm로 여기시켰을 때, 620 nm에서 최대 세기를 갖는 적색 발광 신호, 593 nm의 주황색 발광 스펙트럼과 704 nm의 적색 발광 스펙트럼이 관측되었다. 620 nm에서 관측된 적색 발광 신호의 세기는 활성체 이온 $Eu^{3+}$의 함량이 0.20 mol일 때 최대이었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.41-41
• /
• 2009

본 연구에서 사용한 대향 타겟식 스퍼터링(Facing Targets Sputtering) 법은 일반 스퍼터링 법의 단점을 보완한 고밀도 저온 고속성막이 가능한 장점을 가지고 있기 때문에 플랙시블 디스플레이의 기체 투과 방지막으로 많이 쓰이고 있는 SiOxNy, SiOx, SiNx의 박막을 다층으로 증착하여 polymer 기판 위에 조건에 따라 증착 후 박막의 특성을 연구하였다. 제작된 박막의 광학적 특성을 UV-VIS spectrophotometer(Shimadzu Co.)를 사용하여 200~1100nm의 파장 영역에서 광 투과도를 측정하였으며 박막의 두께와 균일도는 $\alpha$-step(Veeco Co.)을 사용하여 측정하였고, 절대 정량이 가능하고 비파괴 분석법인 RBS(KOBE STEEL LTD.)를 이용하여 표면의 성질을 규명하고 XRR(PANalytical X'Pert PRO)을 분석하여 박막의 계면영역에 대한 물성 변화를 평가하고 박막의 밀도를 측정하였다. SEM(Digital Instrument Co.) 사진을 통해 단면과 표면을 관찰하였고 구조적 특성은 AFM(Digital Instrument Co.)와 XRD(Rigaku Co.) 통해 측정하였고 박막의 성분비는 EDS(JEOL Co.)를 사용하였으며 투습률 측정장치 (MOCON)을 이용하여 WVTR를 측정하였다.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.89-95
• /
• 2003

In this study, the technical characteristics of geosynchronous multi-mission satellites are investigated, compared to communication satellites. Geosynchronous meteorological satellites, whose imaging data is normally shared with the international society, have large coverage for monitoring and data service. Also the higher pointing accuracy is requested to keep the spatial resolution of 1-4km, compared to those of communication satellites. Cryogenic thermal control is needed for the better performance of IR sensors and the contamination protection of optical parts should be considered. On the other hands, for the successful development of the multi-mission satellite COMS, which will be launched in 2008, the special features of attitude control, electrical power, thermal control and mechanism are investigated.

• Laser Solutions
• /
• v.1 no.1
• /
• pp.24-29
• /
• 1998

A new wide laser beam optical system for the laser materials processing has been developed with a polygonal mirror. It consists of polygonal mirror and cooling part that prevents the surface of rotating polygonal mirror from damage by heat. The polygonal minors have been designed and made as 24 and 30 facets in pyramid type. This system provides a uniform linear laser heat source with the surface scanning width from 15 to 50mm according to the scanning height To examine the wide laser beam, He-Ne laser is used. Also, Acryl is used to confirm the laser beam pattern by bum-pattern print To analyze the energy distribution of the wide laser ben empirical values and theoretical values are compared and discussed. To improve the efficiency of the wide laser beam optical system, methods are suggested by the optical theories. For larger area processing like turbine blade, drawing blade, cold roller and guide plate, optimal overlapping locations have been calculated and analyzed by geometric and optical theories.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.11
• /
• pp.969-973
• /
• 2009

In this study, the electrical and optical properties of $(SiO_2)_x(ZnO)_{100-x}$ (SZO) films prepared on the coming 7059 glass substrates by using rf-magnetron sputtering method are investigated. The deposition rate becomes maximum near 3 wt.% and gradually decreases when the $SiO_2$ content further increases. The growth rates of the SZO film with $SiO_2$ content of 3 wt.% is $4\;{\AA}/s$. We found that the average transmittance of all films is over 80% in the wavelength range above 500 nm. The optical band gap were decreased from 3.52 to 3.33 eV as an increase the deposition thickness. X-ray diffraction patterns showed that the film with a relatively low $SiO_2$ content (< 4 wt.%) is amorphous. SZO film with the $SiO_2$ contents of 2 wt.% showed the resistivity of about $3.8{\times}10^{-3}\;{\Omega}{\cdot}cm$. The sheet resistance decreases with increasing the heat treatment temperature.

• Journal of Sensor Science and Technology
• /
• v.10 no.3
• /
• pp.163-172
• /
• 2001

Fiber optic BOTDA (Brillouin Optical Time Domain Analysis) sensor was developed to be able to detect intrusion effect through several ten kilometer optical fiber. Fiber optic BOTDA sensor was constructed with 1 laser diode and 2 electro-optic modulators. The intrusion detection experiment was peformed by the strain inducing set-up installed on an optical table to simulating an intrusion effect. In the result of this experiment, the intrusion effect was well detected as the distance resolution of 3 m through the fiber length of about 4.81 km during 1.5 seconds.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.7
• /
• pp.673-683
• /
• 2010

This study investigates Terrain Aided Inertial Navigation(TAIN) which consists of Inertial Navigation System (INS) with the optical sensor for precise planetary landing. Image processing is conducted to extract the feature points between measured terrain data and on-board implemented terrain information. The navigation algorithm with Iterated Extended Kalman Filter(IEKF) can compensate for the navigation error, and provide precise navigation information compared to single INS. Simulation results are used to demonstrate the feasibility of integration to accomplish precise planetary landing. The proposed navigation approach can be implemented to the whole system coupled with guidance and control laws.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.444-446
• /
• 2015

컴퓨터 생성 홀로그램(CGH: computer generated hologram) 기법은 기존의 홀로그램의 광학적 장치의 단점을 보완하여 범용 컴퓨터에서 홀로그램을 생성할 수 있도록 하는 기술이다. CGH는 입력으로 주어지는 물체의 3차원 정보와 출력으로 나오는 디지털 홀로그램의 해상도에 따라 그 연산량이 결정 된다. CGH는 단순하고 반복적인 수학적 계산을 통하여 디지털 홀로그램을 생성하게 되는데, 기존의 연구들에서는 GPU(graphic processing unit)를 이용하여 알고리즘들을 병렬적으로 처리한다. 본 논문에서는 기존연구에서 쓰인 GPU를 이용한 CGH을 개선하여 GPU가 장착되지 않은 상용 컴퓨터에서 GPU가 장착된 다른 컴퓨터들의 연산 자원을 활용하여 CGH를 수행 할 수 있는 프로그램의 개발 방법을 제안 한다. 본 시스템은 GPU가 요구되지 않는 한 개의 서버 컴퓨터와 GPU가 장착된 다수의 클라이언트들로 구성되어 있다. 서버 측에서 물체의 3차원 정보를 입력 받아 각각의 클라이언트들에게 적절한 연산량을 분배하고, 각 클라이언트들은 이미 알려진 GPU 기반 CGH를 통하여 연산을 수행 한 뒤, 그 결과를 서버로 다시 전송하게 된다. 서버는 수신한 각 결과들을 누적하여 입력 받은 물체에 대한 하나의 온전한 홀로그램을 생성할 수 있게 된다.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.12
• /
• pp.1775-1784
• /
• 2002

Fingerprint recognition technology is used in many biometrics field accordingly essential feature of fingerprint image and the study is progressing. However development is not perfect in performance of the fingerprint recognition and application of the usual life. In the paper, we study various necessity of preprocessing according to algorithm and circumstances of authentication system in automatic information machine. We prove that system circumstance and optation of fingerprints image effectively is the important factor by using optical fingerprint input device and scanning the fingerprint in ID card. And then we present correct and fast computation method for improving image and feature extraction of fingerprint. Also we study effective algorithm implementation of total system.