• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.224-228
• /
• 2008

A highly sensitive integrated photonic temperature sensor was proposed and developed incorporating a polymeric microring resonator. The change in the ambient temperature was estimated by observing the shift in the resonant wavelength of the resonator induced via the thermooptic effect. For the purpose of enhancing its sensitivity, the sensor was built by implementing a polymeric resonator exhibiting a high thermooptic coefficient on a silicon substrate with a small coefficient of thermal expansion. For the range of from $20^{\circ}C$ to $30^{\circ}C$ near the room temperature, the fabricated sensor yielded a sensitivity of as high as 165 ${\pm}/^{\circ}C$ and a resolution of better than $0.1^{\circ}C$. And its performance was found to be hardly affected by the variation in the refractive index of the target analyte, which was applied to the surface of the sensor. It is hence expected that the sensor could be integrated with other refractormetric optical sensors, thereby compensating for the fatal error caused by the change in the ambient temperature.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.50-55
• /
• 2005

A method for measuring the wavefront error and the modulation transfer function(MTF) of large aperture optics using an unequal path interferometer is presented. A bidirectional shearing interferometer is used for collimation testing of the measurement system. A large aperture Fizeau interferometer with long optical path difference measures the wavefront error of the optics under test by using a $\Phi$ 400 mm off-axis parabolic mirror. The MTF is also measured at the wavelength of the interferometer by changing the laser light into partially incoherent light. Test results of a $\Phi$ 300 mm Cassegrain type satellite telescope made in Korea are presented.

• Applied Biological Chemistry
• /
• v.29 no.2
• /
• pp.159-163
• /
• 1986

The optical properties of monocationic zeolite suspension adsorbed with each of $Na^+$, $NH_4^+$, $Ca^{2+}$, and $Al^{3+}$ were studied in the wavelength range $200{\sim}800nm$. The results were as follows. 1. The optical density of zeolite suspension seemed to be affected by the light absorption of zeolite particles at the wavelength range of $200{\sim}300nm$ and by the light scattering of zeolite particles at wavelength of $300{\sim}800nm$. 2. At the wavelength range of $380{\sim}800nm$, the optical densities of monocationic zeoliteg differed mutually according to adsorbed cations and increased in the order of $Al-\;>\;Ca-\;>\;NH_4->\;Na-zeolite$ suspension. 3. It was convenient that at the wavelength range of $380{\sim}800nm$, the diluted suspension of zeolite was measured in the short wavelength and the concentrated suspension of zeolite was measured in the long wavelength. 4. Zeolite particles in zeolite suspension were aggregated and the size of aggregation size was larger in the order of $Al-\;>\;Ca-\;>\;Na-\;>\;NH_4-zeolite$.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.287-293
• /
• 2008

The collimator which makes a collimated beam, is an essential instrument for assembly and evaluation of telescopes. Recently, the Cassegrain type collimator has been widely used for its compact size as the focal length of high resolution cameras becomes longer. However, this kind of collimator has a disadvantage in that the secondary mirror is a heat source which can degrade the evaluation accuracy for an IR camera system. In this paper, we present the fabrication and measurement process for an off-axis parabolic mirror with the physical diameter pf 1 m, effective diameter 930 mm, and the focal length 6 m. After four months of works we obtained the final surface wave-front error of 30.4 nm rms ($\lambda$/138, ${\lambda}=4.2\;{\mu}m$), which is capable of evaluation of an IR camera as well as a visible camera.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.1
• /
• pp.79-90
• /
• 2007

The AmonRa instrument, the primary payload of the international EARTHSHINE mission, is designed for measurement of deep space albedo from L1 halo orbit. We report the optical design, tolerance analysis and the optical performance of the breadborad AmonRa imaging channel instrument optimized for the mission science requirements. In particular, an advanced wavefront feedback process control technique was used for the instrumentation process including part fabrication, system alignment and integration. The measured performances for the complete breadboard system are the RMS 0.091 wave(test wavelength: 632.8 nm) in wavefront error, the ensquared energy of 61.7%($in\;14\;{\mu}m$) and the MTF of 35.3%(Nyquist frequency: $35.7\;mm^{-1}$) at the center field. These resulting optical system performances prove that the breadboard AmonRa instrument, as built, satisfies the science requirements of the EARTHSHINE mission.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.460-465
• /
• 2003

Characteristics of 0.98 $\mu$m-pumped erbium-doped fiber (EDF) sources with double-pass forward (DPF) configuration are analyzed by numerical calculation. Various source characteristics such as output power, spectral width and mean-wavelength stability are investigated with the variation of EDF length, pump power and pump wavelength. Some of the numerical results are compared with experimental ones for verification. The results show that the characteristics of sources with DPF configuration can change considerably with the EDF length. It is also found that an optimum design can exist for stable mean-wavelength against fluctuations of pump power and pump wavelength.

• Korean Journal of Optics and Photonics
• /
• v.11 no.3
• /
• pp.202-205
• /
• 2000

One step thermal potassium ion exchange process was carried out to form optical channel waveguides in an ErNb co-doped phosphate glass. Flowing oxygen gas into KN03 melt during ion exchange was effective to prevent glass surface damage that causes an increase of waveguide propagation loss. Amplification characteristics of the waveguides were evaluated at $1.5{\mu}m$ signal wavelength with 980 om laser diode pump. A 45 mm long waveguide whose processing parameters had been optimized exhibited a small signal net gain of 7.5 dB at the launched pump power of 160 mW.160 mW.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.31-36
• /
• 2007

In order to evaluate the performance of phone camera lenses, we have developed equipment for measuring the modulation transfer function(MTF) for small size lenses. The equipment is composed of an an image analyzer, object generator, and a lens mount. The object generator is rotated for on and off-axis measurement. The lens mount is of horizontal type and tiltable for precise alignment to the optical axis. After the initial alignment process, the measurement is done within 10 seconds automatically

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1070-1074
• /
• 2008

Body fat correlation formula induced by using optical method was used white light LED source and electrical method used BIA(Bio-electrical Impedance Analysis) method measured at same time. In the case of BIA method confirmed phase difference of 6 degree and voltage drop of 2.7V at 5V and 50kHz's input signal. In the case of optical method confirmed that optical intensity increased by order of the biceps, the fleshy inside of the thigh and the triceps. We obtained percent body fat of 20% with the body fat correlation formula induced by photo-electricity method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.50-50
• /
• 2010

Seebeck 효과를 이용한 열발전 소자는 에너지 절약에 대한 사회적인 필요성이 크게 대두됨에 따라 산업폐열 등 저급의 열에너지를 이용한 발전과 무인 작동이 가능하다는 점에서 군사 의료용 및 인공위성의 보조전원의 특수 목적용 전원등으로 사용하고 있다. 또한 Peltier 효과를 이용한 열전냉각 소자는 전자 광학기의 냉각 및 항온유지 등에 이용되고 있다. 이러한 열전소자 중 Bismuth Telluride계 열전소자는 상온부근에서 작동효율이 우수한 것으로, 단결정 또는 소결재를 이용하고 있다. 박막형 열전재료 및 이를 이용한 열전박막소자의 제조와 특성에 관한 연구가 활발히 진행되고 있다. 본 연구에서는 Bi-Te계 열전박막을 기상 증착법으로 제조하였고, 이에 사용되는 다양한 전구체 ($Bi(Me)_3$, $Bi(Et)_3$, $Te(iPr)_2$, $Te(Et)_2$, $Te(t-Bu)_2$)에 대한 증기압, 순도 측정 및 기상 분해특성 평가를 진행하였다. 전구체의 증기압 및 순도 측정을 위해선 자체적으로 제작한 시스템을 활용하였고, 기상 분해특성 평가를 위해선 특별히 제작된 플라즈마 열처리 모듈을 활용하였다. 이러한 연구는 열전박막소자의 제조를 위한 전구체의 선별조건을 제시하는데 기여할 수 있을 것으로 생각된다.