• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.40-42
• /
• 2002

본 논문은 AC PDP의 유지방전 구간에서 전하 제어를 통하여 저전압 구동과 고발광효율을 구현하기위한 새로운 구동 방식을 소개하고, 이 구동방식에 대한 실험결과 및 특성을 소개한다. 이 방식은 패널에 전원을 직접 인가하는 대신 외부 저장 커패시터에 연결하며 여기에 충전된 전압을 LC 공진을 통하여 중간 저장 커패시터를 충전하고 이 중간커패시터에 충전된 제한된 전하로 패널을 간접적으로 구동하는 방식으로, 기존의 방법보다 패널을 방전시키기 위한 전원의 공급 전압을 절반으로 낮출 수 있으며, 패널에 방전 시 공급되는 전력을 제한함으로서 발광효율을 개선할 수 있다. 전하 제어 구동 방식을 4인치 패널에 적용하여 실험한 결과 107V의 낮은 전압의 전원으로 안정된 방전을 유지할 수 있었으며, 1.28 lm/W의 높은 발광효율을 얻을 수 있었다.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.1-6
• /
• 2006

An optical ROM card system which using an optical probe array generated by Talbot effect was proposed as new robust storage solution. To improve the optical density and to decrease the power consumption of the system, it is very important to make the spot sizes of optical probes smaller as well as to increase the optical efficiency from the light source to optical probes. In this study, a microlens illuminated aperture array for generating high efficiency optical probe away with small beam spot was designed and fabricated using monolithic lithography integration method. The maximum intensity of optical probes of microlens illuminated aperture array increased about 12 times of that of aperture array, and the full width half maximum of the optical probe at Talbot plane generated by microlens illuminated aperture array was $0.77{\mu}m$.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.56-64
• /
• 2006

This paper proposes a new and simple input prediction method for robust servo system. A robust tracking control system for optical disk drives to reject disk runout was recently proposed based on both Coprime Factorization(CF) and Zero Phase Error Tracking(ZPET) control. The CF control system can be designed simply and systematically. Moreover, this system has not only stability but also robustness to parameter uncertainties and disturbance rejection capability. Since optical disk tracking servo systems can detect only racking error, it was proposed that the reference input signal for ZPET could be estimated from tracking errors. In this paper, we propose a new control structure for the ZPET controller. It requires less memory than the previously proposed method for the reference signal generation. Therefore, it is very effective in runout control. Furthermore, this method can be applied to defective optical disk like surface defects on disk. Numerical simulation and experimental result show the proposed method effective.

• Transactions of the Society of Information Storage Systems
• /
• v.7 no.1
• /
• pp.36-41
• /
• 2011

The micro laser module was designed and prepared to deliver the light to the HAMR head. It consists of laser diode, photo diode and actuator to realize stable light delivery even though the head is fluctuated during the disk rotation. The optical evaluation was carried out with the actual distance between the light source and HAMR head with a range of reflectivity and it was found that the incident angle could be controlled within ${\pm}0.125^{\circ}$ to maintain same intensity into the HAMR head. It was also confirmed that the designed micro laser module is thermally stable without any severe effect on the magnetic head.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.1
• /
• pp.59-66
• /
• 2019

BIPV or BAPV installation applied to building is increasing through public utility mandates enterprise. Solar PV energy generates only during the day, but if it is operated in convergence with ESS, which stores electrical energy, it can restrain the fossil energy used in buildings throughout the day. A solution is to converge with PV system and ESS. However, PV systems and ESS connected to the power grid in parallel can cause problems of electrical stability. A study was conducted on the case of failure to detect islanding operation under the parallel operation of PV generation and ESS that are connected in parallel to power grid. Experiments conducted various non-islanding detections under the operating conditions. In the experiment results, when one PCS - PV inverter or ESS inverter - was operating under the islanding condition, it stopped working within 0.5 seconds of the Korean grid standard. However, when both of PV inverter and ESS inverter were operating at the same time under the islanding situation, the anti-islanding algorithm did not operate normally and both inverters continuously supplied power to the connected RLC loads. islanding detection Algorithm developed by each inverter manufacturer has caused this phenomenon. Therefore, this paper presented a new test standard for islanding detection.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.252.1-252.1
• /
• 2015

최근 화석연료 고갈 문제를 해결하기 위해 대체에너지 개발과 다양한 형태의 에너지 개발에 관한 연구가 활발히 이루어지고 있다. 특히, supercapacitor는 high energy density, high power density, longer life-time과 같은 특성으로 인해 에너지 저장 소자로 각광 받고 있다. Supercapacitor는 석유를 대체할 수 있으며 이산화탄소 배출이 없는 친환경 에너지인 태양광, 풍력, 수소연료전지 등의 신재생에너지 저장장치로써 큰 비중을 차지한다. Supercapacitor의 종류인 electrical double layer capacitors (EDLCs) 는 전극과 전해질 사이에 발생하는 전기 이중층에 축적되는 전하를 이용하여 에너지를 저장하는 반응 메커니즘을 가지며 전극 재료로는 탄소 소재를 사용한다. 탄소 소재는 환경 오염이 적고 가격이 저렴하며 넓은 표면적이라는 장점이 있다. 하지만 기존 탄소 소재는 이러한 장점을 가지지만 supercapacitor로써의 효율이 좋지 않게 나온다. 이런 문제를 개선하기 위하여 그래핀 나노플레이트(Graphene nanoplate, GNP) 위에 직접 탄소나노튜브(Carbon nanotube, CNT)를 성장 시킴으로써 GNP-CNT 하이브리드 탄소 소재를 제조하여 전극으로 사용하였다. 이 GNP-CNT 하이브리드 탄소 소재는 다차원 구조를 가짐으로써 기존 탄소 소재들보다 분산이 잘되고 전해질과의 작용하는 비표면적이 넓다. 전극을 제작하여 Cyclic voltammetry(CV)와 galvano를 측정한 결과는 기존 탄소나노튜브보다 5배 정도의 정전용량(Capacitance)를 가졌다. 이 전극의 구조적 특성을 관찰하기 위해 SEM, TEM 등을 측정하였다.

• Membrane Journal
• /
• v.21 no.2
• /
• pp.107-117
• /
• 2011

The all vanadium redox-flow battery (V-RFB) is investigating as one of large-scale power storage systems. Particularly, V-RFB is being investigated as one of the power storage systems for the load leveling and output power equalization of the power systems using renewable energy such as solar and wind. In this paper, it was explained for the principle and construction, recent research review, economy, element technology in V-RFB.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.161-163
• /
• 2006

포항가속기는 선형가속기 및 저장링을 통하여 2.5Gev의 고에너지 전자빔 생성과 저장, 유지 되고 있다. 저장링에서 안정적으로 방사광을 추출하여 각종 실험 및 연구를 위하여 이를 제공하고 있다. 이를 위해서 전자가 매우 안정적이고 높은 집적도를 가진 전자다발 형태로 유지되어야 한다. 전자다발의 집적도가 높을수록 전자간의 상호 간섭으로 보유에너지가 더 빠른 시간에 소진되어 전자빔의 수명이 짧아진다. 3차 하모닉 RF 공동기는 전자다발의 운동방향으로 길게 늘려서 전자밀도를 줄여 전자빔의 운전수명을 개선하기 위한 장치이다. 공동기의 제작은 소재준비, 성형, 가공, 용접, 연마, 열처리 등의 여러 공정을 거쳐 완료된다. 본 보고서에서는 공동기의 제작 공정 중 전자빔을 이용한 시험용접, 본용접, 용접부 검사 및 용접부의 연마와 결과에 대하여 기술하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.650-655
• /
• 2013

For the DC-free encoding of source data, the Guided Scrambling (GS) technique is widely used as multi-mode coding in the optical data storage system. For DC-suppression GS coding in the holographic data storage system, the conservative array and balanced coding criteria are proposed. In this paper, equivalent integer programming models are developed to determine the optimal control bits for the minimum digital sum value (MDSV), conservative array, and balanced coding criteria. Using the proposed integer programming models, we compare the performance of GS encoding for the various combination of control bit/array sizes and scrambling polynomials.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.2
• /
• pp.117-122
• /
• 1992

This experiment was conducted to determine tuber yield increase of Konjac by sowing time, seed tuber split method and cultural methods. Tuber yield per unit area was generally increased in early planting than conventional planting time. Tuber yield of polyethylene film mulching culture among storage methods was high, while the emergence rate of konjac for seedling plus PE mulching, and tunnel culture were prompted by 20 days, and especially seedling was to be greatly controlled due to temperature difference of the day and night at emergence. All of the cutting methods(two and four split method) were higher than conventional method because of increasing number of bulblet, accordingly, that method using seed tuber was profitable for mass propagation. Both botanical characteristics and tuber yield tend to be increased at 30 to 50 percent shading than natural condition.