• Korean Journal of Plant Resources
• /
• v.21 no.2
• /
• pp.144-147
• /
• 2008

This study was conducted to clarify the characteristics of seed germination and to promote the germination rate in Pollia japonica Thunb. that was pointed to protect by the Office of Forestry in 1997. It was better the germination rate and the growth of in the light than those of in the darkness. The seed germination of Pollia japonica showed the highest germination rate at $20^{\circ}C$ any other treated temperature. To increase the germination rate of Pollia japonica, it was conducted priming treatments and storage treatments at $4^{\circ}C$. Priming treatments using 1% NaOH, 1% KOH for 30min were effective compared to control, but soaking of 100mg/L GA3 for 24 hours, 1% NaOCl for 30min were not useful. It was higher in wet storage than in dry storage. Wet storage of seeds showed a germination rate with 95.3% in 90-day treatment, which improved 55.3% than dry storage in 90-day.

• Food Science of Animal Resources
• /
• v.24 no.3
• /
• pp.253-259
• /
• 2004

The effect of dietary clay mineral on meat quality in M. longissimus of Hanwoo (Korean cattle) bull beef during refrigerated storage (4$^{\circ}C$) was investigated. Experimental groups were divided into control (basal diet) and CT-1.25% (basal diet + 1.25% clay mineral) groups. There was no significant differences in proximate and fatty acid compositions between control and CT-1.25% groups. The pH of control group was significantly (p<0.05) changed during storage, but CT-1.25% group was little affected by storage time. CIE a＊ (redness), chroma (C＊) values and R630-R580 were significantly (p<0.05) decreased during storage for both groups. In particular, those values decreased more rapidly in the control group. The rate of metmyoglobin accumulation during storage increased more rapidly in the control group. Therefore, discoloration in the control group was more accelerated compared to the CT-1.25% group. TBARS (thiobarbituric acid reactive substances) which represents lipid rancidity were significantly (p<0.05) lower in CT-l.25% group than in the control. Water-holding capacity (WHC) was significantly (p<0.05) increased during storage for both groups, and CT-1.25% group had significantly (p<0.05) higher WHC than control group. Consequently, feeding of clay mineral (1.25%) was effective in increasing meat color stability and WHC, and retarding lipid oxidation than did control group.

• Korean Journal of Weed Science
• /
• v.31 no.1
• /
• pp.78-83
• /
• 2011

This study was conducted to evaluate germination rate of Vicia tetrasperma and V. hirsuta as affected by storage duration, temperature, and light. All seeds of both species were gathered from Dangjin, Chungnam in the late June of 2004 and 2005, stored for a certain period of time, and then exposed for 20 days to the alternating temperatures ($15/^{\circ}C,\;20/10^{\circ}C,\;25/15^{\circ}C$, and $30/20^{\circ}C$) for evaluating the germination rate. Both 2004 and 2005, two species stored at room temperature for 3 months had germination rates less then 30% with applying various alternating temperatures for 20 days although the highest germination rate was obtained with $25/15^{\circ}C$ treatment. V. tetrasperma at 12 month storage after seed gathering in 2005 had 82% of germination rate with $25/15^{\circ}C$ treatment and showed the increased rate as time passed. V. hirsuta at 6, 9, and 12 month storage after seed gathering in 2005 ranged, however, from 33 to 53% of the germination rate at alternating temperature treatments for 20 days and did not seem to be affected by the elapsed time of the storage. Storage at room temperature was more effective for increasing germination rate of both species compared to those of the storage at low temperature. The germination rate of both species was not significantly affected by either exposure of light or short period of high temperature.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.3
• /
• pp.311-318
• /
• 2014

Performance degradation of a battery in 20 kWh energy storage system (ESS) under various operating conditions was studied. And energy saving of the ESS was also monitored by connecting with 20 kW photovoltaic (PV). PV-connected ESS saved 5~7% of energy consumption in 2013 compared to that without such system in 2012. As charge-discharge cycle increased, capacity decreased and the performance degradation was glaringly obvious after 40 cycles. And as charge and discharge rate increased, the performance degradation was more serious. After 50 charge-discharge cycles, a lot of degraded product was deposited on the surface of anode and cathode electrodes, and the cathode side was more contaminated. Therefore, in order to maintain the cell performance, it was more important to protect the degradation of the cathode side.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.8
• /
• pp.690-697
• /
• 2013

The magnets and vacuum chambers, which are the main facilities of the Pohang light source are installed on the storage-ring girders. System safety and reliability should be taken into account for the precise operating of the main facilities, so vibration analysis is essential to do this. Static and seismic analyses were performed for the design of structure considering safety, and also frequency and response spectrum analyses were performed for the precise alignment. With these results, the effects of surrounding vibration were checked. This paper explains about the design and vibration analysis of girder systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10C
• /
• pp.927-932
• /
• 2006

We Propose a partial response maximum likelihood(PRML) detection method that improves the performance of the high-density optical storage system. It concurrently adjusts the coefficient of equalizer and reference values of branches in Viterbi detector. For the estimation of asymmetric channel characteristics by the tangential tilt, we exploit sync patterns in each data frame. The simulation result shows it improves the Performance up to 4dB at 10-6 BER compared to conventional adaptive PRML.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.182-187
• /
• 2005

A large area micro mirror is an optical element that functions as changing an optical path by reflection in integrated optical system. We fabricated the large area silicon mirror by anisotropic etching using MEMS for implementation of integrated optical pickup. In this work, we report the optimum conditions to better fabricate and design, greatly improve mirror surface quality. To obtain mirror surface of $45^{\circ},\;9.74^{\circ}$ off-axis silicon wafer from (100) plane was used in etching condition of $80^{\circ}C$ with 40wt.% KOH solution. After wet etching, polishing process by MR fluid was applied to mirror surface for reduction of roughness. In the next step, after polymer coating on the polished Si wafer, the Si mirror was fabricated by UV curing using a trapezoid bar-type way structure. Finally, we obtained peak to valley roughness about 50 nm in large area of $mm^2$ and it is applicable to optical pickup using blu-ray wavelength as well as infrared wavelength.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.154-159
• /
• 2005

The next generation of optical storage systems requires higher numerical aperture (NA) objective lenses and shorter wavelength laser in order to improve the unit areal density. A blu-ray technology satisfies a miniaturization and a high capacity which are the requirements of the portable device. In this paper, we analyze the optical performance of hybrid micro lens and do active alignment. The hybrid micro lens is manufactured by using a wafer based fabrication technology. Optical components of hybrid micro lens are evaluated. The measurement of the optical power, the spot size and the wavefront error awe performed to evaluate the hybrid micro lens with NA 0.85. Using the measured data, we estimate if the performance of hybrid micro lens corresponds to the designed performance. After the performance of hybrid micro lens is evaluated, the integrated optical pickup and the hybrid micro lens are assembled by active alignment using UV curing and the optical performance of SFFOP is satisfied with BD specifications.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.3
• /
• pp.163-168
• /
• 2006

Small form factor optical pickup (SFFOP) corresponding to BD specifications is strongly proposed for the next-generation portable storage device. In order to generate SFFOP, small sized optical pickup has been fabricated. We have developed a small sited optical pickup that is called the integrated optical pickup (IOP). The fabrication method of this system is mainly dependant on the use of the wafer based micro fabrication technology, which has been used in MEMS process such as photolithography, reactive ion etching, wafer bonding, and packaging process. This approach has the merits for mass production and high assembling accuracy. In this study, to generate the small sized optical pickup for high recording capacity, IOP corresponding to BD specifications has been designed and developed, including three main parts, 1) design, fabrication and evaluation of objective lens unit, 2) design and fabrication of IOP and 3) evaluation process of FES and TES.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.1
• /
• pp.23-27
• /
• 2007

Blu-ray disc 이후의 차세대 고밀도 광 기록 기술로 주목받는 홀로그래픽 데이터 스토리지 시스템을 설계, 제작하고 기록 재생 test 를 수행하였다. 시스템은 각도 다중화법을 채택하였고, 파장 405nm, NA 0.55 신호광 Fourier 변환 렌즈로 미디어에 defocus 하여 기록하였다. 1 page 용량은 raw bit 로 0.74Mbit 이고, SLM 과 CCD 의 over-sampling 비율은 1:1.5 가 되도록 구성하였다. 얻어진 raw 이미지는 위치 및 distortion 보상등의 신호처리 후, 70page 다중화 조건에서 bER $1{\times}10-2$ 수준으로 재생해 낼 수 있었다. 온도 변화에 의한 신호 열화를 보상하기 위해 External Cavity Tunable Blue LD 를 개발하여 온도 변화 $10^{\circ}C$까지 보상 가능함을 확인하였다.