• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.3
• /
• pp.119-129
• /
• 2004

The surges caused by the typhoon “Maemi” which struck the southern coast of Korea are analysed in Kwangyang Bay on September 12, 2003. The deviations of the high water level were 93∼108 cm and the maximum deviations of the water level (maximum surges) were 176∼196 cm in Kwangyang Bay during the typhoon “Maemi”. The major parameters of the maximum deviations of the water level are as follows: Analysis shows that the pressure drop increased the sea level by 59 cm, the flood of the Sumjin River by 4-5 cm and the external surge propagation and wind setup by 113∼132 cm. During the typhoon “Maemi”, the highest high water recorded in Kwangyang Port (PT3) is 460 cm, which is higher by 5 cm than the highest high water (455 cm) with return period of 100 years estimated in planning the Kwangyang steelworks (POSCO) grounds and higher by 15 cm than the observed highest high water (445 cm) recorded during the typhoon “Thelma” on 1987. Thus, the highest high water caused by the typhoon “Maemi” is higher than the extreme highest high water for the last 20 years in Kwangyang Bay.

• Resources Recycling
• /
• v.2 no.2
• /
• pp.9-15
• /
• 1993

In this study, magnetite($Fe_3$$O_4$) from the converter dust of the Kwangyang steel making factory has been recove-red by means of the magnetic separation and the sedimentation column. The magnetite recovered from the dust is used for the preparation of Sr-ferrite instead of hematite. The results obtained in this study as follows : 1. The converter EP dust of the Kwangyang steel making factory are composed of $\alpha$-Fe, ($Fe_3$$O_4$) wustite etc. Magnetite in the converter EP dust is recovered by using sedimentation column and plastic bonding magnet. 2. It was confirmed that Sr-ferrite synthesis could be possible without oxidizing roasting of the magnetite. The steps of Sr-ferrite formation are proposed as follows : I$SrCO_3$ $+Fe_3$O$_4$+1/2(1-X)$O_2$longrightarrow$\alpha$ $-Fe _2$$O_3$ $+SrFeO _3$\ulcorner+$CO_2$II. $5.5\alpha$ $-Fe_2$$O_3$ $+SrFeO_3$\ulcornerlongrightarrowSrFe\ulcornerO\ulcorner+1/2(1/2-X)$O_2$3. By using magnetite from the dust insted of hematite, the hard Sr-ferrite magnet of (B.H)\ulcorner=2.64MGOe in the magnetic characteristics was succesfully prepared.

• Resources Recycling
• /
• v.3 no.2
• /
• pp.9-16
• /
• 1994

In this study, the grinding and wet cyclone process of the dust for the effective separation of high purity iron powder and iron oxide were investigated. The results obtained in this study can be summarized as follows: 1. By applying the wet cyclone technique for the iron powder(+200 mesh) produced from EC dust of the Kwangyang 2nd steel making factory, the iron powder of high content more than 99.76% of Fe was obtained with 47.66% yield at grinding time of 5 minutes by attritor. 2. The particle size distribution of the iron powder recovered from converter dust is quite simillar with the iron powder of sweden Hoganas Co.(W40.24, W40.29, W40.37, W40.37OX). 3. By using iron powder, copper ions are all adsorbed and removed in any concentration ranges of copper sulfate solution(Cu:100, 200, 300, 600 ppm).

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.3
• /
• pp.59-75
• /
• 2006

The vascular plants of this site was listed 360 taxa; 86 families, 229 genera, 311 species, 42 varieties and 7 forms. Specific plant species by floral region were total 40 taxa; 2 taxa(Crypsinus hastatus, Prunus yedoensis) in class V, Patrinia rupestris in class IV, 6 taxa(Elymus mollis, Carex laticeps, Poncirus trifoliata, Melia azedarach var. japonica, Koelreuteria paniculata, Crepiastrum lanceolatum) in class III, Cirsium schantarense in class II, 30 taxa(Lygodium japonicum, Pteris multifida, Phacelurus latifolius, Asparagus cochinchinensis, Ficus erecta, Machilus thunbergii, Zanthoxylum planispinum, Euphorbia esula, Mallotus japonicus, Cayratia japonica, Camellia japonica, Glehnia littoralis, Lysimachia fortunei, Messerschmidia sibirica, Ixeris repens etc.) in class I. The naturalized plants in this site were 14 families, 34 genera, 41 species, 1 varieties, 42 taxa and naturalization rate was 20.3% of all 207 taxa vascular plants. Based on the list of the rare plants by the Forest Research Institute, 2 taxa were recorded in the studied areas; Phacelurus latifolius, Crypsinus hastatus and based on the list of Korean endemic plants, 7 taxa were recorded; Populus tomentiglandulosa, Filipendula glaberrima, Prunus yedoensis, Forsythia koreana, Paulownia coreana, Weigela subsessilis, Carpinus coreana. So, wild plants disturbing ecosystem like Solanum carolinense and Ambrosia artemisiifolia var. elatior have been increasing, it needs continuing control and conservation measures on the plant ecosystem.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.3
• /
• pp.11-17
• /
• 2007

RWe have developed an infrared temperature monitoring system to measure the temperature of hot iron plate in very harsh environmental conditions as iron making equipment. We performed extensive field test for 3 months at the front side of iron plate rolling process of POSCO in Gwang-Yang. From the experimental test, we have confirmed the reliability of the developed system. We adjust the curve fit method to solve the non-linearity equations of A2TPMI sensor, and establish the under $1[^{\circ}C]$precision ratio and 25[msec] process speed each range. As experimental, we have confirmed the reliability of an infrared temperature monitoring system as POSCO test result and CAN network traffic monitoring of polling method.

• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2002.11a
• /
• pp.15-24
• /
• 2002

Polychloinated biphenyls (PCBs) 및 유기염소계 농약은 UNEP에서 지속성유기오염물질(POPs)로 규정하고 있는 화합물로서 환경내 잔류성이 강하고 먹이사슬을 딸라 생물증폭되는 화합물로 알려지고 있다. 광양만의 유기염소계화합물의 오염현황을 파악하고자, 표층퇴적물, 생물, 해수 중의 농도를 정량ㆍ정성분석하였다. 해수의 용존상을 제외한 모든 매질에서 PCBs와 DDT 화합물이 주요 유기염소계 화합물로 검출되었다. 퇴적물 중의 총 PCBs, DDTs, CHLs(클로르단 화합물), HCHs (헥사클로르사이클로헥산)의 농도는 각 각 0.61-1.97 ng/g, 0.16-1.16 ng/g, nd-0.51 ng/g, 0.05-0.79 ng/g의 농도 범위를 나타냈다. 퇴적물 중의 유기염소계화합물의 농도수준은 우리나라 주요 만 (부산만, 영일만, 울산만, 경기만)에서 조사된 퇴적물 중의 농도와 비교할 때 낮은 수준이며, 저서생물에 독성학적 위해를 일으킬 수 있는 수준에 미치지 못한다. 이매패류 중의 유기염소계화합물의 농도는 총 PCBs (4.42-19.ng/g), 총 BBTs (7.54-22.6ng/g), CHLs (0.49-2.0ng/g), HCHs (0.82-7.32ng/g)의 범위를 나타었다. PCBs의 경우 산업시설 및 도시 주변에서 상대적으로 높았으나 전반적으로 비슷한 수준을 나타냈다. 해수 중의 PCBs 농도는 제철소 인근에서 상대적으로 높았으며, 해수의 용존상에서는 입자상에서와 달리 DDTs보다 HCHs가 상대적으로 높은 농도로 검출되었다. 이는 두 상에 분배되는 이들 화합물의 성향에 따르는 것으로 파악된다.

• Journal of the Economic Geographical Society of Korea
• /
• v.10 no.4
• /
• pp.444-460
• /
• 2007

The purpose of this study is to investigate the logical bases and the real situation of the CSR(corporate social responsibility) execution in the context of local governance. Basically, some management necessities to establish a strategic relationship between a firm and its regional community, is the main reason of CSR execution in the region or in general. Although some costs in forms of money or manpower or resources, should be paid to execute the CSR in a short term, there are so many advantages resulting from it in terms of long time periods. Corporate social responsibility seeks to induce a sustainable harmony or interdependent relationship between the firm and its regional community. In case of POSCO Gwangyang works, so much various forms of community contributions are promoted as a part of CSR executions from the passive reaction for civil petitions to the good corporate citizenship activities. In spite of such an active CSR execution in Gwangyang works, there seems to be required that another way within the works should be explored in order to make it much more effective. Optimal distribution of various resources which are called out for the CSR, is one of the key factors that can affect the strategic result of CSR.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.10
• /
• pp.49-57
• /
• 2013

Recently, recycling of the industrial by-products has been an important issue of the Yeosu bay, where large industrial complex is located. Major industrial by-products which are produced from Yeosu industrial complex area are phosphogypsum and flyash, which are about 82% and 10% of the 1.6 million tons industrial by-products. Moreover since the Yeosu industrial complex is located at seaside, phosphogypsum has been pointed as cause of serious environmental contaminant from the regional society. Therefore recycling study can't be delayed anymore. In this paper, artificial aggregate was manufactured by non-sintering process from industrial byproducts - e.g., phosphogypsum and slag - as a geotechnical drainage material. To show the feasibility of the artificial aggregate as a geotechnical drainage material, geotechnical experiments including particle size analysis, permeability test, and large scale direct shear test were carried out. Test results show that the permeability of the artificial aggregates range from $6.94{\times}10^{-1}cm/sec$ to $8.86{\times}10^{-1}cm/sec$, which is much larger value than those are required for the drainage material from the construction specification in Korea, and the friction angle of the artificial aggregate is as large as that of sand in water immersion conditions. From the test results, it was concluded that artificial aggregate made from industrial by-products can be used successfully as a geotechnical drainage material.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.3
• /
• pp.237-247
• /
• 1987

The present study deals with the physico-chemical and meteorological conditions in Porphyra-cultivation ground to determine the relationship between laver production and its environmental factors in Kwangyang Bay from January to April in 1986. As a result, major environmental factors which are thought to have a great influence upon the poor harvest during the cultivation period are as follows; 1) the excessive rainfall in the beginning of cultivation period 2) the accumulation of suspended matters on the thallus of laver 3) the decrease of current velocity and the stagnation of the water in the cultivation ground.

• Journal of the Korean Regional Science Association
• /
• v.31 no.3
• /
• pp.99-112
• /
• 2015

Observation of land surface temperature in industrial areas is problematic, as it is not possible to construct a network of weather stations with sufficiently high density and continuous operation in such zones. Multiphase remote sensing data that cover a wide area and take a short time to process can enable the user to precisely and continuously measure the current and changing land surface temperatures in a certain region. Jeollanam-Do in South Korea is undergoing rapid industrialization, with the establishment of a number of industrial complexes, such as the Gwangyang Steelworks, Yeosu Industrial Complex, Yulchon Industrial complex, and Daebul Industrial Complex. To look into the properties of industrial complex's temperature, this study uses the thermal band of Landsat 7 ETM+ images acquired under thermal infrared wavelengths in order to calculate and compare the surface temperatures of the four above-named industrial complexes. From this, it is possible to obtain the basic information about industrial complex for environmental and natural resource management, which will aid industrial complex planners in developing methods of addressing environmental problems.