• Journal of Sensor Science and Technology
• /
• v.11 no.6
• /
• pp.335-341
• /
• 2002

In this paper, we investigated a novel UV sensor using evanescent field coupling between the side polished fiber and photo-functional polymer waveguide. It was found that resonant wavelength shifts occur due to variation in the refractive index of polymer planar waveguide for its photo-functional properties on exposed UV. Spiroxazine (photochromic dye) was used as the planar waveguide. The resonant wavelength responses were exhibited at 1.44 nm/mW, 1.64 nm/mW, and 1.78 nm/mW when UV irradiations were exposed for 20 seconds, 30 seconds, and 40 seconds, respectively. The recovery time of sensor was independent of UV exposure power and 90% recovery time was 100 seconds.

• Journal of Advanced Navigation Technology
• /
• v.20 no.2
• /
• pp.161-166
• /
• 2016

In high capacity and long haul optical communication systems, signal distortion is induced by chromatic dispersion and nonlinear effects of optical fibers. Dispersion management (DM) combining with mid-spans spectral inversion (MSSI) is one of the various techniques for overcoming this drawback. The most simple configuration of DM link is obtained by uniformly distributing the lengths of single mode fiber (SMF) and residual dispersion per span (RDPS) over whole fiber spans consisted of optical link. In this paper, the system performances in the uniformly distributed DM link combined with MSSI are assessed as a function of the number of fiber spans, because the system performances in this configuration are used as the significant performance criterion in other link configurations, such as the artificial distribution or the random distribution of SMF lengths and RDPS.

• Korean Journal of Optics and Photonics
• /
• v.22 no.2
• /
• pp.96-101
• /
• 2011

Operational and thermal characteristics of a thin disk Yb:YAG crystal with a thickness of 0.8 mm were studied using as a pumping source a fiber-coupled 930 nm laser diode. The heat generated in the crystal was dissipated by placing both surfaces in contact with copper plates with central hole, and the dependence of the temperature change in the illuminated spot on hole size was investigated by measuring the spectral change of the lasing peaks. The slope efficiency and optical-to-optical efficiency with respect to the LD pump power were as high as 42.2% and 34.8%, respectively. The temperature at the illuminated spot increased with diode current and with increasing hole size of the copper plate. When the hole size considerably exceeded the crystal thickness, the temperature rise deviated from the linear increase at high pump power.

• Journal of Navigation and Port Research
• /
• v.26 no.2
• /
• pp.235-243
• /
• 2002

Theoretical analysis have been performed to design the high power semiconductor laser for an optical sensor at 1.55${\mu}{\textrm}{m}$ wavelength range which is the lowest loss wavelength in optical fiber. The materials of active region and SCH were $Ln_{1-x}Ga_xAs_yP_{1-y}$. In order to use the light source of optical sensors, it has to satisfy wide spectral width and short coherence length. Therefore, in order to suppress lasing oscillation, we proposed laterally tilted PBH type with a window region. Also, tapered stripe structure was applied for high coupling efficiency into a single mode fiber. From these analyses, the devices of laterally tilted angled and bending structure were fabricated and their characteristics were measured. In the results of the measurement, the fabricated devices have sufficient output power and wide FWHM to apply to the light source of optical fiber sensors.

• Korean Journal of Optics and Photonics
• /
• v.25 no.2
• /
• pp.72-77
• /
• 2014

We have demonstrated a terahertz (THz) time-domain spectroscopy and imaging system using compact fiber-coupled THz modules. Using this THz spectroscopy system we have measured the absorption spectrum of water vapor in free space over 3 THz, as well as the refractive indices of various substrates such as Si, $Al_2O_3$, and GaAs using the transfer-function method. Through the THz imaging system we have observed a high-quality THz image of a medical knife and metal clip sample, with a resolution of $192{\times}89$ pixels using a step size of 250 ${\mu}m$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.43-49
• /
• 2004

In this paper, we have designed a mode size converter to reduce coupling loss between super-high delta silica optical waveguides and single mode fibers. The new mode size converter has three design aspects; periodically segmented taper waveguide for minimal size, lateral taper waveguide for simple fabrication, and surrounding trenches to improve coupling loss. In the optimal mode size converter design, coupling loss is 0.33dB/point without trenches and 0.2dB/point with trenches.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.187-192
• /
• 2017

The compensation characteristics of the distorted WDM channels compensated for by dispersion management (DM) and optical phase conjugation in the long-haul (50 fiber spans ${\times}80km$) transmission link with the randomly distributed single mode fiber (SMF) length and residual dispersion per spans (RDPS) are investigated as a function of the arrangement of SMF and dispersion compensating fiber (DCF) and the control position of net residual dispersion (NRD). It is confirmed that the compensation effect of the distorted WDM channels strongly depends on the arragement of SMF and DCF, rather than the control position of NRD.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.53-59
• /
• 2000

We propose a modified nonlinear fiber optic interferometer which can serve to generate binary optical pulse sequences for CDMA networks, and to decode them. In one arm cross-phase modulation between a CW signal and a counter- or copropagating high-power pulse takes place in sequences of segment connected via VDM couplers. Preliminary experimental results on code generation as well as autocorrelation and crosscorrelation are presented, using Sagnac interferometer. As we expected, the experimental results show that the outputs of the interferometer device are not summed simply on the basis of power, but the sin-squared version of it. Arbitrary codes can in principle be implemented.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.8
• /
• pp.57-66
• /
• 2000

Add-drop filtering effect of a asymmetric fiber-optic coupler ADF(add/drop filter) is analyzed using a new split-step time-domain model. This model is very useful in simulating the devices containing a directional coupler an Bragg gratings, First, a symmetric fiber-optic coupler ADM is analyzed using this model to confirm the accuracy of the new method. Then, an asymmetric fiber-optic coupler ADF is analyzed, and some design parameters for optimal filtering effect is derived.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.169-174
• /
• 2003

We report theoretical and experimental investigation of a polarizer made of single mode side-polished fiber covered with a metal film. The influence of the metal film thickness and the refractive index of overlay on the device performance has been analyzed in terms of the normal mode theory. Based on the theoretical prediction, a polarizer with 40 ㏈ of polarization extinction ratio and 0.5 ㏈ insertion loss at optical communication wavelength has been realized.