• Korean Journal of Optics and Photonics
• /
• v.35 no.4
• /
• pp.157-163
• /
• 2024

We developed a 3-channel fiber laser with a common seed and a phase control system for laser beam combining through a diffractive optical element. Beam combining was performed by adjusting the angles of the beams incident on the diffractive optical elements, and the phase of each beam was controlled to maximize the intensity of the combined laser beam. The power of the 3-channel laser before passing through the diffractive optical elements is about 65 mW. The power of the combined beam varied between 2.9 mW and 48.3 mW depending on the phase change of each channel. Through phase control, the output of the combined beam can be maintained at 42 mW for more than 91.8% of the total time. It is expected that higher combining efficiency can be achieved by improving the transmittance of the diffractive optical elements and the performance of the phase control system.

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.931-936
• /
• 1997

Optical fiber sensor is a subject which has been attracted considerable attention in recent years. Detection of sound pressure with optical fibers positioned in the arms of a Mach-Zehnder interferometer is presented in this paper. A fiber length of the order of 150m is wounded is made by hollow cylinder type. To increase the sound signal 3${\times}3$ directional coupler is used. Fiber optic hydrophone is the underwater tank with 2kHz sound source. Finally, it is shown that the fiber optic hydeophone can stably detec 2kHz sound.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.630-632
• /
• 2018

The compensation characteristics of the distorted WDM channels compensated for by dispersion management (DM) and optical phase conjugation in the long-haul (50 fiber spans ${\times}$ 80 km) transmission link with the randomly distributed single mode fiber (SMF) length and residual dispersion per spans (RDPS) for implementing of the flexible link configuration are investigated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.633-635
• /
• 2018

The compensation characteristics of the distorted WDM channels compensated for by dispersion management (DM) and optical phase conjugation in the long-haul (50 fiber spans ${\times}$ 80 km) transmission link with the randomly distributed single mode fiber (SMF) length and residual dispersion per spans (RDPS) are investigated as a function of the arrangement of SMF and dispersion compensating fiber (DCF) and the control position of net residual dispersion (NRD).

• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.134-139
• /
• 2002

We report an experimental investigation of the wavelength and polarization selectivity of a side-polished fiber in contact with a metal-clad planar waveguide. The influences of the structural parameters of the planar waveguide, including refractive index of the superstrate and metal thickness, on the optical transmission characteristics of the device were measured and explained. The conditions for high wavelength and polarization selectivity wore predicted and demonstrated experimentally.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.214-215
• /
• 2001

최근 정보통신산업의 급격한 발달로 대용량의 멀티미디어 정보를 초고속으로 전달해야 할 필요성으로 인해 광전송시스템의 개발에서 수십 Gbps급 이상의 기술이 절실히 요구되고 있다. 특히 광통신 시스템이나 광계측 장비들과 결합이 쉽다는 잇점 때문에, 모드록킹된 광섬유 레이저에 대한 연구가 많이 진행되고 있다. 이러한 레이저의 제작에 있어서는 능동형 모드잠금 방식이 적합한데, 능동형 모드잠금 방식의 레이저는 수동형에 비해 안정되고 고반복률을 가진 펄스를 얻을 수 있으나 펄스폭은 상대적으로 길다. (중략)

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.225-225
• /
• 2003

실리카글라스를 기초로 하는 PLC소자는 가격, 광 손실 성질과 광섬유와의 결합효율이 좋아 광통신에 응용되어지고 있으며 Ge 도핑된 실리카 글라스는 PLC소자의 코어물질로 널리 사용되고 있다. 소작제작을 위해서는 높은 식각률과 깨끗하고 적은 표면손상을 얻어야 하므로 유도결합플라즈마를 이용한 건식식각공정개발이 이루어 져야 한다. 본 연구에서는 Ge 도핑된 실리카글라스의 식각특성을 연구하기 위해 $C_2$F/6 와 NF$_3$가스를 사용하였고 ICP power, bias power, 압력, 플라즈마와 샘플간의 거리를 변화시키면서 식각속도, 표면거칠기, 메사수직도, 마스크선택도등 기본공정 조건을 연구하고 첨가가스(CH$_4$, $O_2$), 마스크 물질(Ni, Cr, PR) 도핑농도(0.3, 0.45, 0.7%)등을 변화시키면서 식각특성을 연구하였다. 그 결과 300nm/min, 정도의 식각속도를 가지고 수직한 메사각도(~89$^{\circ}$)와 미려한 표면(표면거 칠기 1.5nm 이하)를 갖는 결과를 얻었다.

• Korean Journal of Optics and Photonics
• /
• v.18 no.3
• /
• pp.190-195
• /
• 2007

A novel optical coupling filter with finite-thickness metal-strip gratings printed on optical planar dielectric slabs is proposed, and Bragg conditions of the device are rigorously evaluated by using Modal Transmission-Line Theory (MTLT). The numerical results reveal that the guiding structures have filtering properties due to a leaky-wave stop-band while conventional DFB guiding structures consisted of dielectric gratings depend on a feedback-wave stop-band. Consequently, it shows that the optical coupling titter dependent on the leaky-wave filtering characteristics can be compounded of such optical devices as LD and optical fiber.

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.109-113
• /
• 2004

We have manufactured and characterized the fiber-to-Planar Waveguide Coupler for analysis of the photo-induced refractive index change of DM-BTE .(l,2-bis[2,5-dimethylthio-phen-3-yl]-hexafluorocyclopentene) When irradiated with ultraviolet light, the colorless diarylethene(DM-BTE)-crystal turned red while keeping the crystal shape. The red color was bleached by irradiation with visible light(λ＞450 nm). The resonant wavelength was shifted and recovered owing to the refractive index variation of the planar waveguide because of its photo-functional properties on exposure to UV and visible light. The wavelength responses of this switch by UV exposure were measured as 0.057 nm/sec with saturation time of 60 seconds. and when illuminated by visible light, resonance wavelength variations were measured as 0.028 nm/sec, with recovery time of 140 seconds.

• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.467-472
• /
• 2002

In this paper, we propose a polarization-insensitive temperature sensor using a thermo-optic effect of the upper and (or) lower cladding of a planar waveguide in contact with a side-polished fiber. A microscope cover glass with thickness of a 170 ${\mu}{\textrm}{m}$ is adopted as an overlay waveguide because this waveguide opposes sudden temperature change and ensures polarization-insensitive responses. The measured polarization-dependence loss is less than 0.3 dB. The temperature can be detected as a result of the shift in coupling wavelength of the sensor. We investigate the shift in coupling wavelength as a function of the temperature variation with respect to the different thermo-optic coefficients of lower and upper claddings. We also show that the temperature sensitivity of the device can be easily controlled by the thermo-optic coefficients of lower and upper claddings of the overlay waveguide.