Korean Journal of Optics and Photonics (한국광학회지)

Optical Society of Korea (한국광학회)
권호 표지
DOI QR코드

DOI QR Code

Wavelength and polarization selectivity of a side-polished fiber contacted with a metal-clad planar waveguide

금속 클래드 평면 도파로와 결합된 측면 연마 광섬유의 파장 및 편광 선택성

  • 김광택 (호남대학교 광전자공학과) ;
  • 황중호 (호남대학교 광전자공학과) ;
  • 이준옥 (호남대학교 광전자공학과) ;
  • 김철호 (호남대학교 광전자공학과) ;
  • 황보승 (호남대학교 광전자공학과)
  • Published : 2002.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

We report an experimental investigation of the wavelength and polarization selectivity of a side-polished fiber in contact with a metal-clad planar waveguide. The influences of the structural parameters of the planar waveguide, including refractive index of the superstrate and metal thickness, on the optical transmission characteristics of the device were measured and explained. The conditions for high wavelength and polarization selectivity wore predicted and demonstrated experimentally.

금속-클래드 평면 도파로와 접합된 측면 연마된 광섬유의 파장 및 편광 선택성에 관한 실험 결과를 보고한다. 금속의 두께와 최상부층의 굴절률을 포함한 평면 도파로의 구조가 소자의 광전송 특성에 미치는 영향을 측정하였고 그 결과를 설명하였다. 높은 파장 선택성과 편광 선택성을 가지는 조건을 예측하였고 실험으로 검증하였다.

Keywords

References

  1. J. Opt. Soc. Am. B v.15 no.2 Polymer in-line fiber modulators for broadband radio-frequency optical links S. A. Hamilton;D. R. Yankelevich;A. Knoesen;R. T. Weverka;R. A. Hill;G. C. Bjorklund https://doi.org/10.1364/JOSAB.15.000740
  2. Electron. Lett. v.28 no.11 In-line fibre-optic intensity modulator using electro-optic polymer G. Fawcett;W. Johnstone;I. Andonovic;D. J. Bone;T. G. Harvey;N. Carter;T. G. Ryan https://doi.org/10.1049/el:19920626
  3. Opt. Lett. v.12 no.4 Exposed-core single-mode fiber channel-dropping filter using a high-index overlay waveguide C. A. Millar;M. C. Brierley;S. R. Mallinson https://doi.org/10.1364/OL.12.000284
  4. Thin Solid Films v.150 a-Si:H film on side-polished fiber as optical polarizer and narrow-band filter A. Andreev;BI. Pantchev;Pantchev;P. Danesh;B. Zafirova;E. Karakoleva
  5. IEEE Proc.-Optoelectron. v.141 no.5 Inline fiber-optic refractometry using index-sensitive resonance positions in single-mode fiber-to-planar polymer-waveguide couplers W. Johnstone;G. Fawcett;L. W. K. Yim
  6. IEEE Phtonics Tech. Lett. v.12 no.8 High-sensivity temperature sensor based on overlay on side-polished fibers A. A. Alvarez-Herrero;H. Guerrero;T. Belenguer;D. Levy https://doi.org/10.1109/68.868002
  7. Sensors and Actuators B v.51 Miniaturization of fiber optic surface plasmon resonance sensors R. Slavik;J. Homola;J. Ctyroky https://doi.org/10.1016/S0925-4005(98)00205-6
  8. IEEE Phtonics Tech. Lett. v.13 no.11 High-Sensitivity temperature sensor using a side-polished single mode fiber covered with the polymer planar waveguide W. G. Jung;S. W. Kim;K. T. Kim;E. S. Kim;S. W. Kang https://doi.org/10.1109/68.959366
  9. IEEE Photonics Tech. Lett. v.6 no.11 Polarization properties of a fiber to planar waveguide coupler incorporating a thin metal layer V. Kutsaenko;W. Johnstone;E. Lavreskii;J. Rice https://doi.org/10.1109/68.334834
  10. Electron. Lett. v.30 no.10 Polarisation referencing in refractometry using fiber to planar waveguide couplers incorporating thin metal layer W. Johnstone;V. Kutsuenko;J. Rice;G. Fawcett https://doi.org/10.1049/el:19940541
  11. Opt. Comm. v.180 Polarizing properties of optical coupler composed of single mode side-polished fiber and multi-mode metal-clad waveguide K. T. Kim;H. W. Kwon;J. W. Song;S. Lee;W. G. Jung;S. W. Kang https://doi.org/10.1016/S0030-4018(00)00646-5
  12. 한국광학회지 v.12 no.5 측면 연마된 광섬유와 금속박막이 포함된 평면도파로 사이의 광결합 김광택;황중호;이준옥;김상우;강신원;서동일;송재원
  13. J. of Optical Comm. v.14 no.5 Multilayer waveguide devices with absorbing layers: an exact analysis E. K. Sharma;M. P. Singh
  14. Opt. Comm. v.126 Coupling between an optical fiber and a planar waveguide R. Vallee;G. He https://doi.org/10.1016/0030-4018(96)00008-9