• Journal of Marine Bioscience and Biotechnology
• /
• v.7 no.2
• /
• pp.52-57
• /
• 2015

The purpose of this study was to investigate a relationship between ultraviolet radiation and initial cell density (ICD) of microalgae using a floating marine photobioreactor (PBR). To examine the effect of ultraviolet (UV) radiation in sunlight on biomass productivity as a function of ICD, 0.5-L floating PBRs covered with or without UV cut-off film were placed in an outdoor rectangular tank containing 200 L of water. At the lower ICDs, 0.01 and 0.05 g/L, biomass productivities in the PBRs without UV cut-off film decreased by $278{\pm}21%$ and $222{\pm}3%$ compared with those with the film, respectively. In contrast, the presence of UV cut-off film did not have a significant effect on biomass productivities at the higher ICDs, 0.25 and 1.25 g/L. When the differences in biomass productivity made by the UV cut-off film were plotted against the sum of cell projection area per light receiving area of the PBR, the results revealed that the inhibitory effect of UV on biomass productivity can be negligible when the sum of cell projection area is equal to the light receiving area of the PBR. These results show that photoinhibition caused by UV radiation could be eliminated via operating the PBR with a proper ICD.

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.77-84
• /
• 1984

This experiment was carried out to determine the effects of night temperature and amount of fertilization on growth and photosynthesis of red pepper plants for providing some basic imformation needed in improving the productivity of red pepper. 1. Plant height, stem length, number of flower buds, dry weight of plants and photosynthetic rate were higher in King Gun Gochu than in Dohusa, but number of leaves, number of internodes and leaf area we re higher in Dohusa compared to King Gun Gochu. 2. Plant height, number of leaves, number of flower buds, dry weight of plants, leaf area and photosynthetic rate were significantly increased by 50% increased fertilization compared to normal fertilization. 3. High night temperature($25^{\circ}C$) treatment increased plant height, stem length, number of leaves, number of internodes, number of flower buds, dry weight of plants and leaf area. 4. RGR and LAR were increased by 50% increased fertilization and high night temperature but NAR was decreased by high flower buds 5. Photosynthetic rate of King Gun Gochu was increased by 50% increased fertilization and high light intensity. 6. Number of flower buds was increased at King Gun Gochu by 50% increased fertilization and high night temperature ($25^{\circ}C$).

• Economic and Environmental Geology
• /
• v.38 no.5 s.174
• /
• pp.513-523
• /
• 2005

The contamination of soils and groundwaters in the Dalcheon mine area, Ulsan, is investigated, and a natural attenuation capacity on redox and pH is evaluated. Arsenopyrite, the major source of arsenic pollution in the Dalcheon mine area, is contained up to $2\%$ in tailings. Furthermore, As-bearing minerals such as loellingite, nicolite, rammelsbergite, gersdorffite cobaltite and pyrite are also source of arsenic contamination, which show various concentration of arsenic each other. Surface of pyrite and arsenopyrite in tailings partly oxidized into Fe-arsenates and Fe-oxides, which means a progressive weathering process. There is no relationship between pH and arsenic content in groundwaters, otherwise Eh and arsenic concentration in unsaturated and saturated groundwater shows positive relationship. RMB (Red Mud Bauxite) could be useful as a trigger on natural attenuation due to superior ability of removal capacity of arsenic when contaminated soil and groundwater in the Dalcheon mine area are remediated.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.81-81
• /
• 2002

$\beta$-Mercaptoethanol($\beta$-ME)은 일반적으로 황화합물(thiol compounds)의 일종으로, 배양액 중에서 이황화결합(disulfide bonds)을 분해하여 일정한 물질의 산화.환원반응에 관여하며, 특히 cysteine이 cystine으로 산화되는 것을 차단함으로서 cysteine의 이용능력을 증대시키고, GSH의 합성을 촉진 및 증대시키는 것으로 알려져 있고, 각종 활성산소로부터 세포를 보호하는 역할을 수행하는 것으로 보고되었다. 특히, 돼지수정란의 체외배양체계에 유의적인 영향을 미치는 것으로 보고되었다(Abebydeera 등, Theriogenol., 50:747-756, 1998). 따라서 본 실험에서는 돼지난포란의 체외성숙시 $\beta$-ME의 첨가배양이 체외수정과 배발달에 미치는 영향에 관하여 조사하였다. 돼지난포란을 10% PFF, 0.1mg/ml cysteine, 10IU/m1 PMSG, 10IU/m1 hCG 및 10ng/m1 EGF가 첨가된 NCSU23 배양액에 $\beta$-ME를 각각 0, 25, 50 및 100uM을 처리하여 22시간 동안 배양을 실시하고, 성선자극호르몬이 배제된 배양액에서 추가로 22시간을 배양하여 체외성숙을 유도하였다. 체외성숙이 유기된 난자는 난구세포를 제거하고, 2.5mM caffeine과 0.1% BSA가 첨가된 mTBM배양액에 정자를 1.25 $\times$ $10^{5}$cells/ml의 농도로 5-6시간 동안 공동배양을 실시하여 체외수정을 유도하였다. 체외수정후 일부의 수정란은 12시간에 난자 급속 염색방법으로 염색하여 다정자침입률 및 자.웅전핵형성률 등을 확인하였다. 그리고 나머지1-세포기의 수정란은 0.4mg/ml BSA가 함유된 NCSU23 배양액에 30 embryos/50ul 소적으로하여 38.8$^{\circ}C$, 5% $CO_2$의 탄산가스 배양기에서 각각 7일간 배양을 실시하였다. 조사된 결과는 SAS/STAT를 이용하여 통계분석을 실시하였다. 체외수정 12시간 후에 난자 급속 염색법으로 염색을 실시한 결과, 모든 처리구에서 핵성숙률(76.4~95.2%), 정자침투율(51.1~66.9%), 웅성전핵형성률(95.2~100%), 다정자침입률(18.2~25.6%) 및 평균침입정자수(1.2~l.4개)에서 유의적인 차이가 인정되지 않았다. 체외배양 48시간 난할률을 조사한 결과, 처리구별 차이(53.9~67.9%)는 인정되지 않았으나, 배양 7일째 배반포형성률은 각각 14.5, 25.4, 17.3 및 12.4%로서 25uM의 $\beta$-ME처리구가 유의적(P<0.05)으로 높은 배발달률을 나타내었고, 총세포수에 있어서는 대조구와 처리구간 유의적인 차이가 인정되지 않았다. 따라서 돼지 난포란을 성숙배양할 때, 25uM $\beta$-ME를 첨가배양하는 것이 양질의 돼지체외수정란을 생산하는 하나의 방법으로 조사되었다.다.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.3
• /
• pp.121-126
• /
• 1995

Diploid plants were obtained by anther culture of tetraploid poplar(Populus alba L. X P.glandutosa Uyeki). The effect 2,4D on callus formation from anther culture was greater than any other auxins tested. The highest average number of multiple shoots per callus was obtained when zeatin was used at levels of 6-8 ${\mu}$M. Regenerated shoots were excised and transferred to MS basal medium. Rooted plantlets were subsequently transferred to pots containing artificial soil mix. Finally 100 plane were transplanted in nursery located in forest Genetics Research Institute. for the 300 anther clones growing in greenhouse for 6 months after transplanting, 33% were slow-growing, 47% were rapid-growing and 20% had huge leaf size with rapid-growing characteristics. Chromosome study showed a narrow range of variation from diploid to tetraploid. DNA polymorphism studies using various RAPD markers revealed some extend of differences among the anther-clones in their band pattern.

• Korean Journal of Weed Science
• /
• v.10 no.3
• /
• pp.179-185
• /
• 1990

Five parents which showed differential response to thiobencarb and their $F_1$ hybrids were treated with thiobencarb (S-[(4-chlorophenyl) methyl]diethylcarbamothioate) at 2 and 4 kg ai/ha in order to investigate the inheritance of rice (Oryza sativa L.) to the herbicide. In the analysis of diallel crosses for tolerance of rice cultivars to the herbicide, highly significant GCA (general combining ability) and SCA (specific combining ability) effects were observed at both herbicide rates using the parameters of plant height and dry weight ; the GCA effect being greater than the SCA effect. The additive effects appeared to be more prevalent than dominance effects, and partial dominance was recognized in relation to herbicide tolerance in the different rice cultivars. Higher heritabilities in the narrow and broad senses were observed at 4 kg ai/ha. The heritabilities in the narrow sense for plant height and dry weight were 0.726 and 0. 743, respectively. IR9660-50-3-1 which showed the highest GCA effects seemed to possess more dominant genes related to herbicide tolerance than the other rice cultivars tested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.291-298
• /
• 2020

The power generation of a PV system changes according to the weather variables, such as solar radiation and temperature. In particular, the output characteristics of photovoltaic systems, which are sensitive to changes in solar radiation, can be produced effectively and reliably in various weather conditions through MPPT (Maximum Power Point Tracking) control. This paper proposes a fuzzy-based MPPT control method to improve the efficiency and stability of the power production from a solar system. To verify the performance of the proposed method, under the same weather environment, the efficiency and stability of the newly proposed fuzzy logic were compared and evaluated empirically with P&O (Perturb and Observe), a representative algorithm of MPPT control. Furthermore, the circuits designed to improve the reliability and reliability of the hardware were manufactured from Printed Circuit Boards (PCB) to conduct experiments. Based on the results of the experiment during a certain period, the fuzzy-based MPPT proposed in this paper improved the efficiency by more than 4.4% compared to the MPPT based on the existing P&O algorithm and decreased the fluctuation width by more than 39.7% at the maximum power point.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.383-383
• /
• 2014

최근 디스플레이, 태양전지 그리고 touch screen panels 등 optoelectronic 장치의 시장이 성장함에 따라 투명전극의 수요가 증가하고 있다. Indium tin oxide (ITO)의 좋은 특성 때문에 주로 투명전극에 많이 사용되고 있다. 그러나 화학적 안정성이 떨어지고, 휘어질 때 특성저하가 심하여 금속나노와이어, 탄소나노튜브, 전도성폴리머, 그리고 그래핀 등의 다른 투명전극의 연구가 활발히 진행되고 있다. 그 중에서 그래핀은 높은 전자 이동도(200000 cm2v-1s-1)와 휘어져도 전기적 크게 변하지 않는 특성 때문에 유망한 투명 전도성 전극 (Transparent Conductive Electrodes, TCEs)으로 연구되어왔다. 또한 다양한 속성 가운데, 높은 광 투과성은 그래핀의 가장 큰 장점이다 [1]. 최근, 화학 기상 증착 (Chemical Vapor Deposition, CVD) 등 다양한 제조 방법이 대량 생산을 위해 개발되었다. 그러나 이 방법은 비용이 많이 들며, 과정이 상당히 복잡하고 높은 온도 (${\sim}1000^{\circ}C$)를 필요로 한다. 따라서 용매 기반의 환원된 그래핀 산화물(Reduced Graphene Oxides, RGOs)이 최근 주목 받고 있다. 그러나 RGOs의 면저항이 높아 전극으로서 사용이 제한된다. 따라서 전기적 특성을 향상시키는 방법으로 단일 벽 탄소 나노튜브 (Single-Walled Carbon Nanotubes, SWNTs)를 혼합하거나 화학적 도핑을 통하여 면저항을 크게 향상시키는 연구가 활발히 진행되고 있다. 그러나 이런 화학적 도핑의 경우 박막이 공기 중에 직접 산소나 습기와 반응하여 전기적 특성이 저하되는 문제점을 가지고 있다 [2]. 이러한 문제를 해결하기 위해 AuCl3을 도핑한 박막에 내열성 및 내광성 등의 화학적 안정성이 뛰어난 PEDOT:PSS를 코팅하여 필름의 공기중의 노출을 막아 줌으로써 도핑의 안전성 및 전기적 특성을 최적화하였다. 본 연구에서는 간단한 dip-coating방법을 사용하여 4개의 RGO/SWNTs 박막을 흡착하였다. 다음으로 AuCl3를 도핑하여 면저항 $4.909K{\Omega}$, $4.381K{\Omega}$인 두 개의 샘플의 시간과 온도에 따른 면저항의 변화를 확인하였다. 그리고 필름의 도핑 안전성을 향상 시키기 위해 AuCl3를 도핑한 필름 위에 전도성 폴리머 PEDOT:PSS 코팅하여 면저항 $886.1{\Omega}$, $837.5{\Omega}$인 두 개의 샘플의 시간과 온도에 따른 면저항의 변화를 확인하였다. AuCl3 도핑된 필름의 경우 공기 중에 150시간 노출 시 72%의 면저항 증가가 발생하였지만 PEDOT:PSS가 코팅된 필름의 경우 5%의 면저항 증가가 나타나 확연한 차이를 보였다. 또한 AuCl3 도핑한 필름의 경우 $150^{\circ}C$에서 60시간동안 공기중에 노출되었을 때 525%의 면저항 증가가 발생하였지만 PEDOT:PSS가 코팅된 필름의 경우 58%의 면저항 증가를 나타내었다. 이것은 PEDOT:PSS가 passivation역할을 하여 필름이 공기에 노출된 부분을 막아주어 도핑된 필름의 면저항의 변화를 줄여 주었음을 알 수 있다.

• Korean Chemical Engineering Research
• /
• v.44 no.1
• /
• pp.46-51
• /
• 2006

As one of the $CO_2$ reduction strategies, a biological method was proposed to convert $CO_2$ to useful biomass with antioxidant carotenoids by photosynthetic microorganisms. One of the photoautotrophs, Haematococcus pluvialis is a freshwater green microalga and accumulates the secondary carotenoid astaxanthin during induction of green vegetative cells to red cyst cells. In this study, $CO_2$ fixation and astaxanthin production using H. pluvialis was conducted by photoautotrophic culture in the $CO_2$ supplemented photo-incubator. Maximum growth rate of H. pluvialis was obtained at a 5％ $CO_2$ environment on basic N and P conditions of NIES-C medium. The photoautotrophic induction consisted of 5％ $CO_2$ supply and high light illumination promoted astaxanthin synthesis in H. pluvialis, yielding an astaxanthin productivity of $9.6mg/L{\cdot}day$ and a $CO_2$ conversion rate of $27.8mg/L{\cdot}day$ to astaxanthin. From the results the sequential photoautotrophic culture and induction process using H. pluvialis is expecting an alternative $CO_2$ reduction technology with a function of valuable biosubstance production.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.584-594
• /
• 2014

To increase of surface hydrophilicity of polymeric thin films is an important approaching technique for introduction of self-cleaning and/or antifogging properties on the surfaces of those films. In general, hydrophilic surface can be produced by coating non ionic surfactants or by increasing surface energy. Various non-ionic surfactants, such as Tween, Span, and PEG-PPG block copolymers were selected for our experiments, because they are cheap and well soluble in toluene system as well as they contain several reactive hydroxy fuctional groups with coupling agents. Blending conditions influence the PET film surface hydrophilicities. However, the introduction of only these surfactants on the surface of PET films did not show the high durability of hydrophilic properties after washing with water. To improve the durability two types of coupling agents such as epoxide and diisocyanate were adopted. Contact angle of water on hydrophilically coated PET film surface with 6 wt% of isophrone diisocyanate(IPDI) containing coating solution was reached to $8.7^{\circ}$, which was an indirect evidence for very high surface hydrophilicity. A light(500 nm of wavelength) transmittance value of coated PET film was changed only from 87% to 85% with keeping a good transparent property. This film can be usable for self-cleaning film industries.