• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.337-346
• /
• 2020

This study was carried out to evaluate the applicability of the soil washing process to remediation mercury-contaminated mine tailing or solid material (soil and sediments etc.) around abandoned mines. First, the physicochemical characteristics of mine tailing were analyzed through particle size analysis and sequential extraction. Secondly, laboratory scale washing experiments were performed using hydrochloric acid, nitric acid, potassium iodide and sodium thiosulfate. As a results of particle size analysis, mine tailing particle were concentrated below 40 mesh and the particle size below 200 mesh was the most analyzed. As a result of sequential extraction, elemental mercury fraction was analyzed as the highest with 69.12%, with strongly bound fraction 15.25% and residual and HgS fractions 11.97%, respectively. Laboratory scale washing experiments showed low applicability for nitric acid and sodium thiosulfate solutions. In case of hydrochloric acid solution, it was analyzed that mercury removal was possible at particle size of 200 mesh or more. Therefore, it is considered to be performed together with the physical sorting process. Potassium iodide solution was analyzed to have high washing efficiency at all concentrations and particle sizes. In particular, the mercury removal efficiency is high in the micro particles, and thus the applicability of the washing technology is the highest.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.1 s.47
• /
• pp.49-61
• /
• 2006

This study was undertaken to investigate the origin of suspended matter to induce turbidity water in Gachang dam in view of environmental geology. During the period from May to August 2004, field works and sampling were carried out three times at the dam and along its streams, and chemical and mineralogical analyses such as ICP, IC, particle size analyzer, XRD and SEM were made on water, soil and suspended matter in water. Electrical conductivity (EC), turbidity, the contents of cation and anion increase from upstream toward the dam mostly due to the geological factors such as weathring of the rocks causing the increase of the total ion content. Vermiculite, illite, kaolinite, quartz, feldspar and iron hydroxide are commonly found in suspended matters in water and soils. Finer particles (d10) in soil increase slightly toward downstream and the vermiculite content is highest in the dam water. Since geological differences are not significant, mineralogy are similar in suspended matters and soils. Clay mineral compositions present in suspended matters were alsmost the same as those in soils, indicating the origin of soils by weathering of host rocks and being transported to the dam by stream water.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.2
• /
• pp.79-86
• /
• 2019

The white aluminum phases in acid mine drainage usually precipitates when mixed with stream waters with relatively high pH. The minerals in white precipitates play important roles in controlling the behavior of heavy metals by adsorbing and coprecipitation. By the phase transition of these minerals in white precipitates, dissolution and readsorption of heavy metals may occur. This study was conducted to obtain preliminary information on the phase transition of the mineral phases in white precipitates. In this study, the mineral phase changes in the white precipitates collected from the stream around Dogye Mining Site over time were investigated with different pH values and temperatures. White precipitates consist mainly of basaluminite, amorphous $Al(OH)_3$ and a small amount of $Al_{13}$-tridecamer. During aging, the incongruent dissolution of the basaluminite occurs first, increasing the content of the amorphous $Al(OH)_3$. After that, pseudoboehmite is finally precipitated following the precursor phase of pseudoboehmite. At $80^{\circ}C$, this series of processes was clearly observed, but at relatively low temperatures, no noticeable changes were observed from the initial condition with coexisting basaluminite and amorphous $Al(OH)_3$. At high pH, the desorption of $SO{_4}^{2-}$ group in basaluminite was initiated to promote phase transition to the pseudoboehmite precursor. Over time, the solution pH decreases due to the dissolution and phase transition of the minerals, and even after the precipitation of pseudoboehmite, only the particle size slightly increased but no clear cystal form was observed.

• Economic and Environmental Geology
• /
• v.55 no.2
• /
• pp.197-207
• /
• 2022

This study investigated spectroscopic exploration of Myeonsan formation, the titanium(Ti) ore hostrock, in Joseon supergroup based on machine learning technique. The mineral composition, Ti concentration, spectral characteristics of Myeonsan and non-Myeonsan formation of Joseon supergroup were analyzed. The Myeonsan formation contains relatively larger quantity of opaque minerals along with quartz and clay minerals. The PXRF analysis revealed that the Ti concentration of Myeosan formation is at least 10 times larger than the other formations with bi-modal distribution. The bi-modal concentration is caused by high Ti concentrated sandy layer and relatively lower Ti concentrated muddy layer. The spectral characteristics of Myeonsan formation is manifested by Fe oxides at near infrared and clay minerals at shortwave infrared bands. The Ti exploration is expected to be more effective on detection of hostrock rather than Ti ore because ilmenite does not have characteristic spectral features. The random-forest machine learning classification detected the Myeonsan fomation at 85% accuracy with overall accuracy of 97%, where spectral features of iron oxides and clay minerals played an important role. It indicates that spectral analysis can detect the Ti host rock effectively, and can contribute for UAV based remote sensing for Ti exploration.

• Economic and Environmental Geology
• /
• v.49 no.5
• /
• pp.349-360
• /
• 2016

This study determined mineralogical characteristics and discussed the meaning of mineralogical changes of the lower Choseon Supergrouop in the Weondong area based on the field geological investigation and the drilling core description using X-ray diffraction (XRD) mineral quantification and Scanning Electron Microscopy (SEM) observation. 100 samples with depth were collected from the core (250 m long) at a site in the study area. Especially, to investigate the changes from the upper Daegi Formation to the lower Hwajeol Formation, the samples were collected closely with the interval of about 0.3 m at this section. All samples were made into power using mortar for XRD. Mineral quantitative analysis was executed using Relative Intensity Ratio (RIR) method with corundum as an internal standard phase. Calcite, $2M_1$ illite and quartz are main constituents in most of samples. Dolomite and siderite are significantly observed in the Sesong Formation. As the results of quantitative analysis for the major minerals, the upper Daegi Formation is dominated by calcite with over 80%. The Sesong Formation includes high percentage of dolomite and siderite with the intercalation of thin layers containing high calcite and $2M_1$ illite contents. Hwajeol Formation is characterized by the alternation between thin layers of $2M_1$ illite and quartz-dominated layer (IQDL) and calcite-dominated layer (CDL). IQDL is more frequent in the lower part, whereas CDL is more common in the upper part. The boundary between Daegi Formation and the Sesong Formation is distinct, whereas the boundary between the Sesong Formation and the Hwajeol Formation tends to be changed gradually in mineralogy. The result of SEM observation shows that quartz and $2M_1$ illite are detrital, and a significant amount of calcite also shows detrital form with some recrystallized one, indicating that the repeated influx of terrestrial materials had changed the mineralogy of the shallow sea depositional environment in the early Paleozoic era.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.109-110
• /
• 2014

주사전자현미경(Scanning Electron Microscopy: SEM)은 고체상태에서 미세조직과 형상을 관찰하는 데에 가장 다양하게 쓰이는 분석기기로서 최근에 판매되고 있는 고분해능 SEM은 수 나노미터의 분해능을 가지고 있다. 그리고 SEM의 초점심도가 크기 때문에 3차원적인 영상의 관찰이 용이해서 곡면 혹은 울퉁불퉁한 표면의 영상을 육안으로 관찰하는 것처럼 보여준다. 활용도도 매우 다양해서 금속파면, 광물과 화석, 반도체 소자와 회로망의 품질검사, 고분자 및 유기물, 생체시료 nnnnnnnnn와 유가공 제품 등 모든 산업영역에 걸쳐 있다(Fig. 1). 입사된 전자빔이 시료의 원자와 탄성, 비탄성 충돌을 할 때 2차 전자(secondary electron)외에 후방산란전자(back scattered electron), X선, 음극형광 등이 발생하게 되는 이것을 통하여 topography (시료의 표면 형상), morphology(시료의 구성입자의 형상), composition(시료의 구성원소), crystallography (시료의 원자배열상태)등의 정보를 얻을 수 있다. SEM은 2차 전자를 이용하여 시료의 표면형상을 측정하고 그 외에는 SEM을 플랫폼으로 하여 EDS (Energy Dispersive X-ray Spectroscopy), WDS (Wave Dispersive X-ray Spectroscope), EPMA (Electron Probe X-ray Micro Analyzer), FIB (Focus Ion Beam), EBIC (Electron Beam Induced Current), EBSD (Electron Backscatter Diffraction), PBMS (Particle Beam Mass Spectrometer) 등의 많은 분석장치들이 SEM에 부가적으로 장착되어 다양한 시료의 측정이 이루어진다. 이 중 결정구조, 조성분석을 쉽고 효과적으로 할 수 있게 하는 X선 분석장치인 EDS를 SEM에 일체화시킨 장비와 EDS 및 PBMS를 SEM에 장착하여 반도체 공정 중 발생하는 나노입자의 형상, 성분, 크기분포를 측정하는 PCDS(Particle Characteristic Diagnosis System)에 대해 소개하고자 한다. - EDS와 통합된 SEM 시스템 기본적으로 SEM과 EDS는 상호보완적인 기능을 통하여 매우 밀접하게 사용되고 있으나 제조사와 기술적 근간의 차이로 인해 전혀 다른 방식으로 운영되고 있다. 일반적으로 SEM과 EDS는 별개의 시스템으로 스캔회로와 이미지 프로세싱 회로가 개별적으로 구현되어 있지만 로렌츠힘에 의해 발생하는 전자빔의 왜곡을 보정을 위해 EDS 시스템은 SEM 시스템과 연동되어 운영될 수 밖에 없다. 따라서, 각각의 시스템에서는 필요하지만 전체 시스템에서 보면 중복된 기능을 가지는 전자회로들이 존재하게 되고 이로 인해 SEM과 EDS에서 보는 시료의 이미지의 차이로 인한 측정오차가 발생한다(Fig. 2). EDS와 통합된 SEM 시스템은 중복된 기능인 스캔을 담당하는 scanning generation circuit과 이미지 프로세싱을 담당하는 FPGA circuit 및 응용프로그램을 SEM의 회로와 프로그램을 사용하게 함으로 SEM과 EDS가 보는 시료의 이미지가 정확히 일치함으로 이미지 캘리브레이션이 필요없고 측정오차가 제거된 EDS 측정이 가능하다. - PCDS 공정 중 발생하는 입자는 반도체 생산 수율에 가장 큰 영향을 끼치는 원인으로 파악되고 있으며, 생산수율을 저하시키는 원인 중 70% 가량이 이와 관련된 것으로 알려져 있다. 현재 반도체 공정 중이나 반도체 공정 장비에서 발생하는 입자는 제어가 되고 있지 않은 실정이며 대부분의 반도체 공정은 저압환경에서 이루어지기에 이 때 발생하는 입자를 제어하기 위해서는 저압환경에서 측정할 수 있는 측정시스템이 필요하다. 최근 국내에서는 CVD (Chemical Vapor Deposition) 시스템 내 파이프내벽에서의 오염입자 침착은 심각한 문제점으로 인식되고 있다(Fig. 3). PCDS (Particle Characteristic Diagnosis System)는 오염입자의 형상을 측정할 수 있는 SEM, 오염입자의 성분을 측정할 수 있는 EDS, 저압환경에서 기체에 포함된 입자를 빔 형태로 집속, 가속, 포화상태에 이르게 대전시켜 오염입자의 크기분포를 측정할 수 있는 PBMS가 일체화 되어 반도체 공정 중 발생하는 나노입자 대해 실시간으로 대처와 조치가 가능하게 한다.

• Economic and Environmental Geology
• /
• v.12 no.1
• /
• pp.41-49
• /
• 1979

A literature review is made on the physical and chemical characteristics of clay minerals in acidic solutions from the mineralogical and hydrometallurgical viewpoints. Some of the important characteristics of clays are their ability to cation exchange, swelling, and incongruent dissolution in acidic solutions. Various clay minerals can take up metallic ions from solution via cation exchange mechanism. Generally, cation exchange capacity increases in the following order : kaolinite, halloysite, illite, vermiculite, and montmorillonite. In acidic solutions, the cation uptake such as copper by clay minerals is strongly inhibited by hydrogen and aluminum ions and thus is not economically significant factor for recovery of metals such as uranium and copper. In acidic solutions, the cation uptake is substial. Swelling is minimal at lower pH, possibly due to lattice collapse. Swelling may be controllable with montmorillonite type clays by exchanging interlayer sodium with lithium and/or hydroxylated aluminum species. The effect of add on clay minerals are : 1. Division of aggregates into smaller plates with increase in surface area and porosity. 2. Clay-acid reactions occur in the following order: (i) $H^+$ replacement of interlayer cations, (ii) removal of octahedral cations, such as Al, Fe, and Mg, and (iii) removal of tetrahedral Al ions. Acid attack initiates, around the edges of the clay particles and continued inward, leaving hydrated silica gel residue around the edges. 3. Reaction rates of (ii) and (iii) are pseudo-1st order and proportional to acid concentration. Rate doubles for every temperature increment of $10^{\circ}C$. Implications in in-situ leaching of copper or uranium with acid are : 1. Over the life span of the operation for a year or more, clays attacked by acid will leave silica gel. If such gel covers the surface of valuable mineral surfaces being leached, recovery could be substantially delayed. 2. For a copper deposit containing 0.5% each of clay minerals and recoverable copper, the added cost due to clay-acid reaction is about 1.5c/lb of copper (or 0.93 lbs of $H_2SO_4/1b$ of copper). This acid consumption by clay may be a factor for economic evaluation of in-situ leaching of an oxide copper deposit.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2003.05a
• /
• pp.80-80
• /
• 2003

포천-기산리 일대에 분포하는 쥬라기의 대보화강암류의 변형정도를 결정하기 위해 석영의 파동소광의 강도(IWE : Intensity of Wavy Extinction)를 편광현미경, 디지털 카메라, NIH Image로 측정하였다. 파동소광이 나타나는 석영입자의 한 부분이 편광현미경 상에서 최대 소광이 될 때 IWE를 측정하고, 이 때 나타나는 파동소광의 아입자경계에 수직한 방향으로 측정을 시도하였다 본 연구에 사용된 NIH Image는 파동소광을 보여주는 각 부분의 광도를 256단계의 흑백 농담변화로 나타낼 수 있다. 이를 이용하여 측정 길이에 대한 농담변화로 IWE를 구하였다. 이렇게 획득한 IWE를 5$^{\circ}$ 단위로 묶어 돗수분포표로 처리하였으며, 자료의 분포특성상 히스토그램의 최빈값과 중간값 사이의 중간값을 그 암석의 대표 IWE로 정의하였다. 이를 다시 5단계의 변형대(무변형, 저변형, 중변형, 고변형, 최고변형)와 각각의 변형지수(D1, D2, D3, D4, D5)로 묶었다. 본 연구지역에 분포하는 화강암류는 흑운모화강암(Gb), 동부의 석류석흑운모화강암(Ggb) 그리고 북부의 복운모화강암(Gtm)으로 구성되어 있는 바 본 연구에는 크게 포천읍을 기준으로 서부에 분포하는 Gb와 동부에 분포하는 Ggb에서 파동소광의 강도 측정이 이루어 졌다. 연구결과 Gb는 D2 이하의 낮은 변형도가 나타났고, Ggb는 D3이상의 고변형이 나타나, 전반적으로 조사지역의 북서부에서 남동부로 갈수록 변형도가 증가하는 양상을 보여주었다.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.4
• /
• pp.333-339
• /
• 2003

A new mineral, Zn analogue of rancieite (Chimooite), has been discovered at the Dongnam mine, Korea. It occurs as compact subparallel fine­grained flaky or acicular aggregates in the massive manganese oxide ores which were formed by supergene oxidation of rhodochrosite­sulfide ores in the hydrothermal veins trending NS­N25E and cutting the Pungchon limestone of the Cambrian age. The flakes of chimooite are 0.2 mm for the largest one, but usually less than 0.05 mm. The acicular crystals are elongated parallel to and flattened on (001). This mineral shows gradation to rancieite constituting its marginal part, thus both minerals are found in one and the same flake. Color is bluish black, with dull luster and brown streak in globular or massive aggregates. Cleavage is perfect in one direction. The hardness ranges from 2.5 to 4. Under reflected light it is anisotropic and bireflectant. It shows reddish brown internal reflection. Chemical analyses of different parts of both minerals suggest that rancieite and chimooite constitute a continuous solid solution series by cationic substitution. The empirical chemical formula for chimooite has been calculated following the general formula, $R_2_{x}$ M $n^{4+}$$_{9­x}$ $O_{18}$ $.$n$H_2O$ for the 7 $\AA$ phyllomanganate minerals, where x varies from 0.81 to 1.28 in so far studied samples, thus averaging to 1.0. Therefore, the formula of Zn­rancieite is close to the well­known strochiometric formula $_Mn_4^{4+}$ $O_{9}$ $.$4$H_2O$. The mineral has the formula (Z $n_{0.78}$N $a_{0.15}$C $a_{0.08}$M $g_{0.01}$ $K_{0.01}$)(M $n^{4+}$$_{3.98}$F $e^{3+}$$_{0.02}$)$_{4.00}$ $O_{9}$ $.$3.85$H_2O$, thus the ideal formula is (Zn,Ca)M $n^{4+}$$_4$ $O_{9}$ $.$3.85$H_2O$. The mineral has a hexagonal unit ceil with a=2.840 $\AA$ c=7.486 $\AA$ and a : c = 1 : 2.636. The DTA curve shows endothermic peaks at 65, 180, 690 and 102$0^{\circ}C$. The IR absorption spectrum shows absorption bands at 445, 500, 1630 and 3400 c $m^{1}$. The mineral name Chimooite has been named in honour of late Prof, Chi Moo Son of Seoul National University.ity.versity.ity.y.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.427-437
• /
• 2020

Manganese nodules, which are evaluated as potential metal resources, have been found in the Arctic Ocean as well as in the abyssal plains of the Pacific and Indian Oceans. Manganese nodules exhibit strong variations in the morphology, internal texture, chemical composition and mineralogy as they grow. The relationship between the texture and chemical elemental composition during the growth process is well documented, but the mineral composition variation during the growth process is not. Because the manganese oxide minerals in nodules are fine-grained and poorly crystalline, quantitative analysis for the mineral composition is challenging for the bulk nodule sample. This study investigated the internal texture and Mn-oxide mineral composition of manganese nodules obtained from the East Siberian Sea. Semi-quantitative analysis was attempted for three main Mn-oxide minerals constituting the manganese nodules (i.e., todorokite, buserite and birnessite) using the peak area ratio of X-ray diffraction analysis graphs. In the East Siberian Sea manganese nodules, birnessite is more abundant than buserite or todorokite, and no correlation is found between the mineral composition and the internal texture. Instead a correlation is found between the relative content of todorokite and the lamellae depth. The todorokite content tends to increase from the surface to the core of the nodules, which can be attributed to a recrystallization process or difference in the growth rate within the nodule. This study shows that semi-quantitative analysis of manganese oxide minerals using the peak area ratio is useful in the mineralogical study of manganese nodules.