• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.318-322
• /
• 2009

광물탐사 과정 중에 원격탐사 기법을 도입하면 지표 광역조사를 보다 효율적으로 수행할 수 있다. 위성영상에서 특정 광물의 분포 위치와 분포량에 대한 분석을 수행하기 위해서는 대상 광물의 분광반사특성을 분류 기준으로 선정하여야 한다. 본 연구에서는 국내 광산 및 채석장에서 채취한 광물과 암석 시료를 이용하여 구성 광물을 분석하고 분광반사특성을 측정하였다. 다양한 위성영상들의 구성 밴드들에 대한 파장영역을 추출하고 측정된 분광반사특성 자료를 추출된 파장영역으로 재구성하여 광물 및 암석들의 고유한 분광특성들의 보존 유무에 대해 분석을 수행하였다.

• Mineral and Industry
• /
• v.20 no.1
• /
• pp.19-27
• /
• 2007

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.1
• /
• pp.63-69
• /
• 2019

The oxidation states of structural Fe in minerals reflect the paleo-depositional redox conditions for the biologically or abiotically induced mineral formation. Particularly, nano-scale analysis using high-resolution transmission electron microscopy (HRTEM) and electron energy loss spectroscopy (EELS) is necessary to identify evidence for the microbial role in the biomineralization. HRTEM-EELS analysis of oxidation states of structural Fe and carbon bonding structure differentiate biological factors in mineralization by mapping the distribution of Fe(II)/Fe(III) and source of organic C. HRTEM-EELS technique provides geomicrobiologists with the direct nano-scale evidence of microbe-mineral interaction.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.2
• /
• pp.97-110
• /
• 1994

고사리광산의 도석에는 다량의 석영과 함께 녹니석/스멕타이트 혼합층광물, 운도/스멕타이트 혼합층광물, 카오리나이트와 같은 점토광물이 산출한다. 이들 점토광물에 대해 주로 X-선회전분석과 화학분석 등을 이용하여 광물학적 특성을 검토하였다. 이 광산의 도석은 녹니석/스멕타이트 혼합층광물을 다량 함유하는 것이 특징으로 나타났다. 이 녹니석/스멕타이트 혼합층광물은 Li을 함유하는 돈바싸이트로 된 녹니석층과 바이델라이트에 가까운 스apr타이트층으로 구성된 혼합층구조를 이룬다. 이 곳에 산출하는 운모/스멕타이트 혼합층광물은 모두 약 15% 이하의 팽윤층을 포함하는 것으로 되어 있다.이 광산의 도석은 백악기의 유문암 및 유문암질 응회암이 열수변질작용을 받아 형성된 것으로 나타났다. 점토광물조합의 분포상태에 의해 대략적인 변질분대가 나누어진다. 중심부인 강변질대에서는 다량의 녹니석/스텍타이트 혼합층광물이 나타나며 카오리나이트가 수받되기도 한다. 그 외곽지역의 약변질대에서는 점토광물로서 운모/스멕타이트 혼합층광물이 주로 나타난다. 카오리나이트는 주로 열극이나 그 주위에 국부적으로 산출되는 경향이 있다. 이와 같은 변질광물의 산출상태로 볼 때 변질작용의 진행에 따라 운모/스멕타이트 혼합층광물이 먼저 형성된 후 이것의 일부가 녹니석/스맥타이트 혼합층광물 및 카오리나이트로 변화된 것으로 생각된다. 도 카오리나이트는 열수의 공급이 많은 열극부에서 녹니석/스멕타이트 혼합층 광물과 거의 동시기에 침전된 것으로 생각된다. 이 광산에서 산출하는 일부 운모/스멕타이트 혼합층광물은 후기의 변질작용에 의해 형성된 것도 포함된다.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.2
• /
• pp.73-78
• /
• 2016

The oxidation states of structural Fe in clay minerals often reflect the paleo-redox conditions of the depositional environments. It is inevitable to utilize the high resolution of transmission electron microscopy (TEM) to investigate the mechanism of mineral transformation at nano-scale. The applications of TEM- electron energy loss spectroscopy (EELS) for quantification of $Fe(III)/{\Sigma}Fe$ from the K-nontronite formation associated with structural Fe(III) reduction in nontronite under deep subseafloor environment were demonstrated. In particular, quantification of the changes in Fe-oxidation state at nanoscale is essential to understand the mechanisms of minerals formation. The procedure of EELS acquisition, quantitative determination of Fe-oxidation states, and advantages of EELS techniques were discussed.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.2
• /
• pp.103-111
• /
• 2018

Mineralogical properties of two Asian dust (Hwangsa) samples collected during dust events in April 6 and 15, 2018 were examined by X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD analyses showed that Asian dusts were dominated by phyllosilicates (62 wt%) comprising illite-smectite series clay minerals (ISCMs) (55%), chlorite (3%) and kaolinite (4%). Nonphyllosilicate minerals were quartz (18%), plagioclase (9%), K-feldspar (3%), calcite (3%), and gypsum (2-4%). Mineral compositions determined by SEM chemical analyses were consistent with XRD data. ISCMs occur as submicron grains forming aggregate particles or coating coarse mineral grains such as quartz, plagioclase, K-feldspar, chlorite, and calcite. The ISCMs are often associated with calcite nanofibers and gypsum blades. Mineralogical properties of 2018 dusts were similar to those of previous dusts although clay contents were higher than that of coarse 2012 dust.

• Economic and Environmental Geology
• /
• v.15 no.4
• /
• pp.205-219
• /
• 1982

The Eosangcheon manganese ore deposits occur as supergene weathering deposits along quartz porphyry dikes developed in the Ordovician Heungweolri dolomite and Samtaesan limestone formations. The manganese ores are composed of manganese oxide minerals and associated other minerals. Rancieite and todorokite are abundantly found, and birnessite, nsutite, pyrolusite and chalcophanite are found in minor quantities. Associated other minerals are calcite, gypsum, goethite, lepidocrosite, quartz, and sericite. Microscopic, chemical, X-ray powder diffraction, infrared absorption spectroscopic and differential thermal analyses have been made for manganese oxide minerals and associated other minerals. The relationship of birnessite and rancieite was studied by means of X-ray powder diffraction and infrared absorption spectroscopic analyses. It is assumed that these minerals are closely related to each other in crystal structure, but separate species. The manganese oxide minerals were formed mainly by replacement, precipitation from solution, and recrystallization in the supergene weathering environment. The trend of formation of manganese oxide minerals is: (Rhodochrosite)-(todorokite)-(birnessite, rancieite)-(nsutite, pyrolusite, chalcophanite).

• Journal of the Mineralogical Society of Korea
• /
• v.5 no.1
• /
• pp.32-41
• /
• 1992

An XRD quantitative analytical method using calculated XRD patterns was discussed in this study, Deep-seabed sediments commonly contain smectite, illite, chlorite, and kaolinite, and XRD pattern of each clay mineral of appropriate chemical composition was simulated by using an XRD pattern calculation method. Theoretical peak intensities of specific reflections of four clay minerals (the 001 reflections of smectite and illite, the 004 reflection of chlorite, and the 002 reflection of kaolinite) were measured from calculated patterns, and MIF(mineral intensity factor)value of each phase was determined from the intensities of calculated patterns. The peak intensities obtaine from experimental XRD patterns of sediments were corrected using the MIF values so that the calibrated intensity values for the specimens are linearly proportional to the weight fraction of each phase, which is normalized to 100 wt%. The MIF method can provide accurate quantitaive results without the necessity of correcting the factors by the mass absorption coefficient of each phase. This method excludes the necessity of standard specimens having compositions that are similar to those of clay minerals in the sediment samples. Therefore, quantitaive analysis using XRD calculation method can be utilized for the specimens, for which the standard specimens are very difficult or impossible to obtain. this quantitative method can provide rapid, routine analysis results for a large number of samples which occur in similar geological environments.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.2
• /
• pp.79-87
• /
• 2016

Asian dust (Hwangsa) interacts with light, atmospheric gas, aerosol, and marine ecosystem, affecting Earth climate. Mineralogical properties are essential to understand the interaction between the dust and environments. In this study, we examined the mineralogical properties of Asian dust collected at Deokjeok Island, Incheon, Korea in February 22, 2015. X-ray diffraction (XRD) analyses showed that phyllosilicate minerals (62 wt%) dominate the Asian dust. Illite-smectite series clay minerals (55%) were common with minor chlorite (5%) and kaolinite (2%). Non-phyllosilicate minerals were quartz (18%), plagioclase (10%), K-feldspar (4%), calcite (4%), and gypsum (1%). Similar results were obtained by mineral quantification using scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). Transmission electron microscopy combined with EDS confirmed illite-smectite series clay minerals as the dominant phyllosilicate type. Morphological analyses using SEM showed clay agglomerates, clay-coated quartz, feldspars, and micas. Gypsum grains were common on the particle surface, while calcite nanofibers, previously reported as common on the surface, were rare, indicating the reaction of calcite and acidic atmospheric pollutants to form gypsum. The analytical result of 2015 Asian dust would contribute to the establishment of mineralogical base for the modeling of the interaction between Asian dust and environments.

• Mineral and Industry
• /
• v.26
• /
• pp.49-69
• /
• 2013