• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.81-89
• /
• 1999

Among various wavelength conversion technologies, that using the cross-gain modulation in laser diode makes it possible to deal with the high speed signal quite simply and efficiently. In this paper, presented was the applicability of an improved time-domain large-signal dynamic model as a CAD tool to analyzed the characteristics of SSGDBR(Superstructure Grating Distributed Bragg Reflector) laser diodes used for wavelength converters. Using this model, it was shown that this kind of wavelength converter can provide the widely tunable wavelength conversion of the high speed data above 10 Gbps. We also investigated the effect of input optical power and the bias current on the characteristics of the device such as extinction ration and eye diagram. The modeling results show very similar trend to the experimental reports.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.5
• /
• pp.692-699
• /
• 2008

This paper describes optimal operation method using recognition of walker's will for a robotic walker. Recently, walking aid system has been required according to the increase of elder and handicapped person. However, most of walking aid system don't have actuator for its movement. Unfortunately, standard frames have weakness for the movement to upward/download direction of slope. So, active type walking aids are interested, but it is not easy to control. In this paper, we adapt user's will system that can recognize walking direction and speed. First, FSR(Force Sensing Register) is applied to measure user's will to walk. And then, fuzzy algorithm is used for determining optimal wheel velocity and direction of the walking aid. From the result, walking aid can move smoothly and safely following the user's will. The walking aid can help user to walk more optimally. Here, all the processes are verified experimentally in the real world.

• Journal of Energy Engineering
• /
• v.29 no.3
• /
• pp.86-90
• /
• 2020

This paper examines a blockchain network-based transaction system using location proofing in power direct transactions between networked energy clouds, energy communities, and prosumer machines participating in smart cities. It utilizes location-based blockchain network technology, which enables long-distance travel with recharging by power purchases during autonomous movements, autonomous electric vehicles that can purchase and sell electricity, and solar street lights that can be produced and sold in fixed form. In addition, it is possible to provide optimum power transaction matching and settlement reliability between machines without human intervention in power transactions between electric chargers. It also introduces a business-to-object business model between autonomous machines that exist in multiple and different spaces and through energy clouds that are expected to be scattered with various transaction prices, policies, and incentives.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2001.11b
• /
• pp.103-106
• /
• 2001

본 논문에서는 MPEG2비디오 스트림에서 직접 얻을 수 있는 정보들을 활용하여 카메라의 움직임을 추정하여 이를 기반으로 하여 움직이는 객체를 추정하고자 한다. 이를 위해, 먼저 MPEG2의 움직임 벡터는 압축의 효율성 때문에 움직임의 예측이 순서적이지 못한데, 예측 프레임들의 속성을 이용하여 이를 광 플로우(Optical Flow)를 갖는 움직임 벡터(Motion Vector)로 변환하였다. 그리고 이러한 벡터들을 이용하여 카메라의 기본적인 움직임인 팬(Fan), 틸트(Tilt). 줌(Zoom) 등을 정의하였다. 이를 위하여 팬, 틸트-줌 카메라 모델의 매개변수와 같은 의미의 $\Delta$x, $\Delta$y, $\alpha$값을 정의하고자 움직임 벡터 성분의 Hough변환을 이용하여 $\Delta$x, $\Delta$y, $\alpha$값들을 구하였다. 또한 이러한 카메라 움직임(Camera Operation)은 시간적으로 연속적으로 발생하는 특징을 이용하여 각 프레임마다 구한 카메라의 움직임을 보정하였다. 마지막으로 움직이는 객체의 추정은 우선 사용자가 원하는 객체를 바운딩박스 형태로 정의한 후 카메라 움직임이 보정된 객체의 움직임 벡터를 한 GOF(Group of Pictures) 단위로 면적 기여도에 따라 누적하여 객체를 추적하고 해석하였으며 DCT 질감 정보를 이용하여 객체의 영역을 재설정 하였다. 물론 압축된 MFEG2비디오에서 얻을 수 있는 정보들은 최대 블록 단위이므로 객체의 정의도 블록단위 이상의 객체로 제한하였다. 제안된 방법은 비디오 스트림에서 직접 정보를 얻음으로써 계산속도의 향상은 물론 카메라의 움직임특성과 움직이는 객체의 추적들을 활용하여 기존의 내용기반의 검색 및 분석에도 많이 응용될 수 있다. 이러한 개발 기술들은 압축된 데이터의 검색 및 분석에 유용하게 사용되리라고 기대되며 , 특히 검색 툴이나 비디오 편집 툴 또는 교통량 감시 시스템, 혹은 무인 감시시스템 등에서 압축된 영상의 저장과 빠른 분석을 요구시 필요하리라고 기대된다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.126-131
• /
• 2004

As a noninvasive imaging method, optical coherence tomography system has been extensively studied because it has some advantages such as imaging of high resolution, low cost, and compact size configuration. In order to improve the SNR of OCT system, two types of interferometers were configured and then, we compared simulation with measurement of reference sample. In the OCT system is configured with Michelson interferometer, the contrast of cross-sectional image is reduced with low SNR detection which is due to loss of feedback interference signal from light source part. Also, in order to image measured data with real time, image processing program is constructed. From results of simulation, it is confirmed that improved Michelson interferometer is improved about 10[dB] with a 50 : 50 fiber coupler. And from the measurement of reference sample, about 5[dB] is improved with a 50 : 50 fiber coupler. It is confirmed that the OCT system is configured with the improved Michelson interferometer which has a good distinctive cross-sectional image due to higher contrast.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.89-98
• /
• 2011

Four kinds of gain and offset correction coefficients that are used to correct the nonuniformity between pixels are discussed. And their correction performance has been compared by performing image correction. using the correction coefficients calculated, on the real image data obtained from a newly fabricated camera electronics system. The performance of the correction coefficients depends in general on the number of the light input levels used to obtain the reference image. The result shows that, as expected obviously, when only two light input levles are used to obtain the reference image, even though its correction coefficients are relatively easily calculated, the correction performance is relatively poor. And with the number of light inputs increased to a value of larger than two, the correction performance is improved. It is noted, however, no Significant performance difference is found between the different correction coefficients employed.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.10
• /
• pp.1269-1284
• /
• 2001

The Secure Sockets Layer is a protocol for encryption TCP/IP traffic that provides confidentiality, authentication and data integrity. Also the SSL is intended to provide the widely applicable connection-oriented mechanism which is applicable for various application-layer, for Internet client/server communication security. SSL, designed by Netscape is supported by all clients' browsers and server supporting security services. Now the version of SSL is 3.0. The first official TLS vl.0 specification was released by IETF Transport Layer Security working group in January 1999. As the version of SSL has had upgraded, a lot of vulnerabilities were revealed. SSL and TLS generate the private key with parameters exchange method in handshake protocol, a lot of attacks may be caused on this exchange mechanism, also the same thing may be come about in record protocol. In this paper, we analyze SSL protocol, compare the difference between TLS and SSL protocol, and suggest what developers should pay attention to implementation.

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.395-402
• /
• 2015

This study was considered utilization of hyperspectral image analysis for monitoring. Accordingly we applied to stone cultural properties to data correction methods, image classification techniques, NDVI computation techniques using hyperspectral image. As the results, hyperspectral image analysis was possible making detailed deterioration map, accurate calculation of deterioration rate, mapping of normalized difference vegetation index on the basis of reflectance of each materials. Therefore, hyperspectral image analysis will be used for effective monitoring techniques of stone cultural heritages.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.4
• /
• pp.295-302
• /
• 2002

PAHs (polycyclic aromatic hydrocarbons) deposited in soil are one of serious problems against sustainable land use. In this paper, chemical soil flushing in a packed sandy soil matrix using a natural surfactant, $\beta$-cyclodextrin (CD) was studied via a fluorescence spectroscopy and a dye labelling. The contaminants are lipophilic ring compounds- phenanthrene and naphthalene. Sand type and flushing intensity (rate and concentration) are chosen as important investigation variables. The removal efficiencies were proportional to flow rate, concentration, temperature of the flushing solution and voidity of the sand column. Initial sorption of the surfactant onto the soil matrix was found to be a key step while flow shear was more crucial in the latter steps. The residual portion of the surfactant, which was most likely to be due to the initial sorption, would not be so influential on this type of soil washing for long times. These results will be useful in future for pilot scale in situ washing and for establishing better soil washing strategy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.86-96
• /
• 2006

In recent year, EPON(Ethernet PON) system is expected to be more attractive solutions for high speed, broadband access networks in next generation access networks due to the conversionce of low-cost ethernet equipment and low-cost fiber infrastructure. Upstream channel control algorithm is essential to hare upstream bandwidth in EPON. In this paper, we suggest HUHG(High Utilization and Hybrid Granting) algorithm for supporting high bandwidth utilization and QoS for different service class. This algorithm improves bandwidth utilization as removing or diminishing idle time of upstream channel using characteristics of fixed EF(Expedited Forwarding) sub-cycle. The proposed algorithm also minimizes the packet delay and delay variation of EF class. We conduct detailed simulation experiments using OPNET to study the performance and validate the effectiveness of the proposed algorithm.