• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.1-7
• /
• 2000

Generally, one-dimensional fiber optic code-division multiple-access(CDMA) system is encoded and decoded using optical orthogonal codes(OOC’s), where two-dimensional fiber optic CDMA system uses optical orthogonal signature pattern codes(OOSPC’s) for parallel data link process. The OOSPC’s should have good autocorrelation and cross-correlation properties. However, if timing information or synchronization of OOSPC’s can be obtained by other means, the property of autocorrelation may not be restricted and we can increase the number of pattern codes. In this paper we introduce the fiber optic CDMA system for parallel transmission of two-dimensional data and investigate methods of generation of two-dimensional pattern codes. The probability density function of interference noise is calculated in interfering OOSPC’s of the users and the corresponding bit error rate is derived.. We compare each OOSPC’s by plotting bit error rate versus threshold values and the number of simultaneous users, from the result, we propose the optimal OOSPC’s conditions for the parallel transmission of two-dimensional data.

• The Korean Journal of Applied Statistics
• /
• v.29 no.5
• /
• pp.859-872
• /
• 2016

Land cover classification is an important tool for preventing natural disasters, collecting environmental information, and monitoring natural resources. Hyperspectral imaging is widely used for this task thanks to sufficient spectral information. However, the curse of dimensionality, spatiotemporal variability, and lack of labeled data make it difficult to classify the land cover correctly. We propose a novel classification framework for land cover classification of hyperspectral data based on convolutional neural networks. The proposed framework naturally incorporates full spectral features with the information from neighboring pixels and has advantages over existing methods that require additional feature extraction or pre-processing steps. Empirical evaluation results show that the proposed framework provides good generalization power with classification accuracies better than (or comparable to) the most advanced existing classifiers.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.141-147
• /
• 2021

In this paper, in order to improve the utilization of hyperspectral large-capacity data feature information by reducing complex computations by dimension reduction of neural network inputs in embedded systems, the band selection algorithm is applied in each subset. Among feature extraction and feature selection techniques, the feature selection aim to improve the optimal number of bands suitable for datasets, regardless of wavelength range, and the time and performance, more than others algorithms. Through this experiment, although the time required was reduced by 1/3 to 1/9 times compared to the others band selection technique, meaningful results were improved by more than 4% in terms of performance through the K-neighbor classifier. Although it is difficult to utilize real-time hyperspectral data analysis now, it has confirmed the possibility of improvement.

• Smart Media Journal
• /
• v.12 no.3
• /
• pp.49-59
• /
• 2023

Optical Camera Communication (OCC), known as the next-generation wireless communication technology, is currently under extensive research. The performance of OCC technology is affected by the communication environment, and various strategies are being studied to improve it. Among them, the most prominent method is applying convolutional neural networks (CNN) to the receiver of OCC using deep learning technology. However, in most studies, CNN is simply used to detect the transmitter. In this paper, we experiment with applying the convolutional neural network not only for transmitter detection but also for the Rx demodulation system. We hypothesize that, since the data images of the OCC system are relatively simple to classify compared to other image datasets, high accuracy results will appear in most CNN models. To prove this hypothesis, we designed and implemented an OCC system to collect data and applied it to 12 different CNN models for experimentation. The experimental results showed that not only high-performance CNN models with many parameters but also lightweight CNN models achieved an accuracy of over 99%. Through this, we confirmed the feasibility of applying the OCC system in real-time on mobile devices such as smartphones.

• Journal of Intelligence and Information Systems
• /
• v.29 no.1
• /
• pp.79-105
• /
• 2023

Due to unprecedented extreme weather events such as global warming and climate change, many parts of the world suffer from severe pain, and economic losses are also snowballing. In order to address these problems, 'The Paris Agreement' was signed in 2016, and an intergovernmental consultative body was formed to keep the average temperature rise of the Earth below 1.5℃. Korea also declared 'Carbon Neutrality in 2050' to prevent climate catastrophe. In particular, it was found that the increase in temperature caused by greenhouse gas emissions hurts the environment and society as a whole, as well as the export-dependent economy of Korea. In addition, as the diversification of transportation types is accelerating, the change in means of choice is also increasing. As the development paradigm in the low-growth era changes to urban regeneration, interest in idle railway sites is rising due to reduced demand for routes, improvement of alignment, and relocation of urban railways. Meanwhile, it is possible to partially achieve the solar power generation goal of 'Renewable Energy 3020' by utilizing already developed but idle railway sites and take advantage of being free from environmental damage and resident acceptance issues surrounding the location; but the actual use and plan for these solar power facilities are still lacking. Therefore, in this study, using the big data provided by the Korea National Railway and the Renewable Energy Cloud Platform, we develop an algorithm to discover and analyze suitable idle sites where solar power generation facilities can be installed and identify potentially applicable areas considering conditions desired by users. By searching and deriving these idle but relevant sites, it is intended to devise a plan to save enormous costs for facilities or expansion in the early stages of development. This study uses various cluster analyses to develop an optimal algorithm that can derive solar power plant locations on idle railway sites and, as a result, suggests 202 'actively recommended areas.' These results would help decision-makers make rational decisions from the viewpoint of simultaneously considering the economy and the environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.639-646
• /
• 2016

In this study, the contactless measurement method with a optical displacement sensor(ODS, ADNS 9500) was proposed to overcome flaws in a rotary encoder based measurement under particular circumstances, such as a slippage and a case of little rotational inertia. The performance tests of the optical displacement sensor using data acquisition board and National Instruments's LabVIEW program were performed to accomplish accurate displacement measurements and the performance characteristics according to measurement direction, speed, acceleration, height and surface types were discovered through the repetitive tests. The experimental results indicate that, in order to get an accurate in-plane motion, the height(distance between the ODS and the target surface) has to be maintained at the range of 2.4 mm to 3.2 mm and the sensitivity(resolution) should be modified and applied to the formulae for displacement calculation, considering its measurement direction, speed and surface type.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.560-567
• /
• 2011

In this paper, we reduced the optical noise interference using polarizers in a visible light communication system. In a transmitter, two light-emitting diodes(LEDs) are modulated synchronously by the original and the reversed signals of the transmitted data, and the two LED lights are radiated through orthogonal polarizers. In a receiver, two optical signals are detected through orthogonal polarizers and differentially amplified to remove the optical noise. In an environment that noise light from a fluorescent lamp is much stronger than the signal, the receiver with orthogonal polarizers removed the 120 Hz noise, and synchronous light transmission of the original and the reversed signals using two LEDs reduced the illumination flickering to about one-eighth that using one LED.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.3
• /
• pp.200-206
• /
• 1999

This paper describes the stress analysis of a curved beam by using photoelasticity. In order to measure accurate isochromatic fringe orders at certain locations. fringes are doubled and sharpened by digital image processing. After fringe multiplication and sharpening. fringe orders can be read as a quarter order interval (N=0, 1/4, 2/4, 3/4,...). The results obtained from photoelastic experiment are compared with those calculated by using theory. Two results are agreed well even though there are some scatter bands with maximum 8 percent for the results of photoelastic measurements and theoretical calculation. Difference may be occurred due to the slight misalignment of the direction to which axial load is applied in photoelastic experiment. It is confirmed that accurate measurement of stress distribution can be possible by using the techniques of fringe multiplication and sharpening in photoelasticity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.133-133
• /
• 2019

하천의 하상재료는 전반적인 하천 계획 및 정비 등의 기초자료이다. 특히 하천의 하상재료 조사는 하천의 조도계수 산정, 하천의 유사이송 특성 분석 및 하천 서식처 등의 하천환경 조사를 위하여 수행한다. 지금까지의 하천 하상재료 조사는 사람이 직접 하상토를 채취하거나 사진을 이용하여 대략적인 스케치를 통해 진행하다보니 자료의 품질에 대한 신뢰도가 떨어지고, 사람이 직접조사를 해야 하기 때문에 비용이 많이 필요하여 몇 개 지점을 대상으로 하상재료 조사를 수행해야 하는 등의 한계를 가지고 있다. 따라서 하천 환경 평가를 위한 하상재료 조사를 위해서는 좀 더 체계적이고 과학적인 기술 개발이 요구된다. 특히 물속의 하천 하상재료를 조사하는 것은 육안 또는 카메라를 이용한 조사로는 어려움이 많기 때문에 하천 전체의 공간적인 하상재료 조사를 위해서는 새로운 기술이 필요하다. 이에 본 연구에서는 보다 정확한 조도계수 산정을 위해 초분광 영상을 이용하여 하상재료를 분류하고, 이를 이용하여 하천 환경 평가를 할 수 있는 하상재료 분포도를 만들기 위한 하상재료의 분광특성 분석 연구를 수행하였다. 초분광 영상의 분광특성은 수백개의 밴드가 연속적으로 구성된 정보를 말하며, 영상 내 모든 화소의 파장정보를 포함하는 데이터 큐브형식으로 구성된다. 물체의 파장정보는 분광기나 초분광 영상 촬영 장치를 통해 수집할 수 있으며 파장정보는 파장과 이에 해당하는 영역의 반사도를 측정하여 하상재료의 분광반사특성으로 확인할 수 있다. 따라서 본 연구에서는 하천의 다양한 하상재료들만의 고유 분광반사특성을 분석하여 하상재료별 분광 라이브러리를 구축하고자 한다. 또한 이와 같이 하상재료별 분광 라이브러리를 구축한 결과를 활용하여 무인기 기반의 초분광 영상을 활용한 하천 하상재료 분류 기술을 개발하고자 한다. 이를 위해 본 연구에서는 하상재료별 분광라이브러리를 구축하였고, 실제 하천에서 무인기 초분광 영상에 활용한 결과 수체가 존재하는 영역에서도 초분광 영상을 활용하여 하상재료의 분류가 가능한 것을 확인하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.315-316
• /
• 2019

전투복, 군용 천막 등에 사용되는 위장무늬는 군 작전 수행 시 주변 환경의 색상, 패턴을 모사하여 개인병사 및 무기체계의 위장 기능을 극대화하고, 이를 통해 아군의 생명과 시설피해를 최소화하기 위한 목적으로 사용된다. 특히 최근 들어 군의 작전환경과 임무가 복잡하고 다양해짐에 따라, 작전환경에 대한 데이터의 취득 및 정량적 분석을 통해 전장 환경에 최적화된 위장무늬 패턴 및 색상 추출에 대한 연구의 필요성이 증대되고 있다. 본 논문에서는 한반도 자연환경 영상에 대한 자기 조직화 지도(SOM, Self-organizing Map) 기반의 한반도 자연환경 대표 색상 군집화 연구 방법에 대해 서술한다. 이를 위해 한반도 내 위도를 고려한 장소에서 시간별, 계절별 자연환경 영상 수집을 진행하며, 수집된 영상 내 다수의 화소의 군집화를 위해 2차원 SOM을 활용한다. 영상 내 각 화소의 색상 값에 대한 SOM의 학습 시, RGB공간상의 색차/색상 인지 왜곡을 피하기 위하여 CIEDE2000 색차 식을 통해 군집화를 진행한다. 실험결과에서는 온라인상으로 수집한 여름 및 가을철 대표 색상 군집화 결과와, 현재까지 수집된 계절별 자연환경 사진 내 6억 7648개 화소에 대한 대표 색상 군집화 결과를 보여준다.