• The Journal of the Acoustical Society of Korea
• /
• v.34 no.1
• /
• pp.36-45
• /
• 2015

Recently, a lot of studies have been made about the methods used to generate turbulent velocity fields stochastically in order to effectively predict broadband flow noise. Among them, the FRPM (Fast Random Particle Mesh) method which generates turbulence with specific statistical properties using turbulence kinetic energy and dissipation obtained from the steady solution of the RANS (Reynolds Averaged Navier-Stokes) equations has been successfully applied. However, the FRPM method cannot be applied to the flow noise problems involving intrinsic unsteady characteristics such as centrifugal fan. In this paper, to effectively predict the broadband noise generated by centrifugal fan, U-FRPM (unsteady FRPM) method is developed by extending the FRPM method to be combined with the unsteady numerical solutions of the unsteady RANS equations to generate the turbulence considered as broadband noise sources. Firstly, an unsteady flow field is obtained from the unsteady RANS equations through CFD (Computational Fluid Dynamics). Then, noise sources are generated using the U-FRPM method combined with acoustic analogy. Finally, the linear propagation model which is realized through BEM (Boundary Element Method) is combined with the generated sources to predict broadband noise at the listeners' position. The proposed technique is validated to compare its prediction result with the measured data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.7
• /
• pp.1044-1049
• /
• 1993

In this paper, it is shown that B-CDMA systems inherently reduce the effects of Multi Path fading phenomena which causes to degrade the performance of mobile communication systems. B-COMA systems use PN codes of high chip rates ( > 10 Mbps) and evaluate autocorrelation with the same code in the receiver. Therefore, it is possible that multipath signals, whose delay time is longer than one chip duration compared to the first signal, are removed. We model the wideband fading channel as a suitable linear filter, and perform computer simulation of signal transmission and reception. Graphic comparison of eye diagrams between the narrowband and wideband systems is shown.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.7
• /
• pp.480-486
• /
• 2012

In the design of electro acoustic transducer, power factor improvement circuit is more required rather than impedance matching if the driving power amplifier has little inner resistance. Many research results have been focused on the power matching circuit designing for transferring maximum power in the wideband. There are few results in the designing study on the power factor improvement for the wide band electro acoustic transducer. In this paper, we propose a new design method on the power factor improvement for the wide band electro acoustic transducer. The proposed method consists of two steps, the chebyschev matching method and the constrained optimization, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.78-85
• /
• 2015

Fools usually make people laugh through their comic appearances and foolish behaviors. A fool in King Lear also gives us pleasure by his unique jokes and humors, however, he is not so foolish. He is very wise and has the intuition to penetrate people's mind and understands the facts. He predicts the future, criticizes the untrueness and heals the wounded mind. He always keeps Lear company and makes him realize his own foolishness. After getting out of his own suffering and fear, Lear experiences his healing process of purification with the help of the fool. In this respect, the fool in King Lear is a wise helper and healer for King Lear.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.172-175
• /
• 2010

본 논문에서는 GaN HEMT를 이용하여 Jamming용 System에 사용될 수 있는 고효율 및 고출력 특성을 가지는 광대역 Amplifier를 제작하였다. Jamming System에서 핵심이 되는 Amplifier는 넓은 범위의 주파수에서 통상적으로 사용되는 출력 신호에 비해 보다 높은 출력의 신호를 구현하는 것이 중요하다. 본 논문에서는 GaN HEMT에 안정적인 전원 공급을 위한 음 전원 Bias 제어 회로와 Sequence 회로 및 온도에 따른 Gain 보상 회로를 구현하였으며, 500~2500MHz의 광대역에서 동작하면서 50W 이상의 출력을 낼 수 있도록 설계하였다. 출력 전력이 향상과 안정적인 동작을 위해 Main 출력 단은 60Watt 급의 GaN HEMT 소자와 광대역 Coupler를 이용하여 Balanced Structure로 설계하였다. 제작된 광대역 Amplifier는 30V 단일 전원에서 동작하도록 설계되었고, 크기는 140*90mm이다. 동작주파수 대역(500~2500MHz)에서 Small Signal Gain 63dB와 Gain Flatness ${\pm}$2dB, -10dB 이하의 Input Return Loss를 가진다. CW(Continuous Wave) Signal을 이용하여 측정하였으며, 50Watt 이상의 Saturation Power에서 최대 45%, 최소 28% 정도의 효율 특성을 보였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5B
• /
• pp.324-329
• /
• 2005

In the traditional telephone services, the settlement method for usage of facilities has been systematically and reasonably arranged based on the cost. Through the advanced technology, the telecommunication services such as the convergence of voice-data, wire-wireless, communication-broadcasting, etc are offering. So, new settlement method in the broadband convergence network (BCN) should be necessary. This paper suggests inter-companies settlement method in the broadband network using interconnection bandwidth and transmission distance factor. By reflecting the facility cost weight on each BCN level, the cost settlement for various services can be easily done. As the settlement model for BCN, the inter-companies interconnection and settlement can be normalized by interconnection bandwidth and transmission distance factors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.90-98
• /
• 1999

This paper presents a wideband single-balanced mixer using a diode which can be used in RF receiver of microwave measurement systems. For wideband characteristic, local oscillator(LO) signal is provided to diode with low loss using a coplanar waveguide-to-slotline balun. For high isolation characteristic radio frequency (RF) port and intermediate frequency (IF) port are designed using directional coupler. This mixer presents 30.5~31.17dB conversion loss whose flatness is within 1dB for 9 kHz~2.6 GHz wideband RF signal, and above 30 dB isolation for LO signal.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.52-57
• /
• 2000

In this paper, we designed the 16 Kbps speech coder that has compatibility with CS-ACELP algorithm(G.729). The speech signal is sampled at rate of 16 KHz, divided into two narrowband signal by QMF filterbank, and decimated to rate of 8 KHz. The lower-band signal is encoded by CS-ACELP and the upper-band signal is encoded by Adaptive Transform Coding(ATC) algorithm. At the receiver, two band signals are synthesized by decoder of CS-ACELP and ATC, respectively. The reconstructed output is obtained by passing the QMF synthesis bank. The proposed wideband coder is evaluated with ITU-T G.722 coder through the Mean Opinion Score(MOS) test.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.224-225
• /
• 2012

최근 광대역 통합망의 급속한 발전을 통해 각종 센서 정보의 실시간 수집 및 관리가 가능함에 따라 안정적이고 효율적인 기술에 대한 수요가 높아지고 있다. 한편 하 폐수 처리시설을 포함한 Smart Water Grid에서도 광대역 통합망 기반의 신기술을 융합한 실용화 및 기술개발의 필요성을 제시하고 있다. 기존 광대역망 관련 기술에서는 개별적이고 단일화된 네트워크망을 구성하고 있을 뿐 통합화 및 최적화에 대한 고려는 되지 않고 있다. 따라서 본 논문에서는 하 폐수 처리시설에서 효과적인 광대역 통합망 구성을 위한 Wifi 및 Zigbee 스위칭 기반의 모뎀기술을 제안하였으며, 핵심기술을 토대로 판교 하 폐수 처리시설에 관련 테스트 베드를 구축하고 데이터 송수신 기능을 확인함으로써 제안한 시스템의 유용성을 입증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.61-62
• /
• 2013

In this paper, a design method for a compact broadband planar dipole antenna fed by a microstrip (MS) line is studied. The proposed broadband dipole is optimized for terrestrial digital television (DTV) receiving. The dipole is fed by an MS line with 75-ohm characteristic impedance on an FR4 substrate and its size is $90mm{\times}180mm$. The dipole is modified to half bow-tie type for size reduction. A simplified balun is adopted for the impedance matching between the MS line and coplanar strip which feeds the dipole. The optimized dipole antenna for DTV band (470-806 MHz) is fabricated on an FR4 substrate and tested experimentally to verify the results of this study.