• Korean Journal of Optics and Photonics
• /
• v.18 no.3
• /
• pp.185-189
• /
• 2007

A novel technology for CWDM (Coarse Wavelength Division Multiplexer) utilizing a PLC (Planar Lightwave Circuit)-AWG (Arrayed Waveguide Grating) fabrication process is proposed. BPM (Beam Propagation Method) Simulation results on the employed parabolic-horn-type input slab waveguide of AWG and the performance of the 20 nm-channel spacing CWDM with flattened passband are presented. Waveguides of $0.75{\triangle}%$ have been used in this experiment and the insertion loss at the peak wavelength is 3.5 dB for a Gaussian spectrum and is 4.8 dB for a flat-top spectrum. The bandwidth at 3 dB is better than 10 nm and 13 nm for Gaussian and flat-top spectra, respectively.

• Geophysics and Geophysical Exploration
• /
• v.18 no.2
• /
• pp.85-90
• /
• 2015

Orientation corrections for Korean seismic stations were calculated by using ambient noise cross-correlation. This method uses Rayleigh waves extracted from ambient noise cross-correlation instead of teleseismic waveforms from earthquakes, which have been generally used for previous studies. The theoretical background of the method is that the phase of radial-vertical cross-correlation function should be the same as that of $90^{\circ}$ phase-shifted vertical-vertical cross-correlation function. The results calculated from stacked cross-correlograms from Jan. 2007 to Sep. 2008 are comparable to the previous results obtained from teleseismic waveforms. In addition, overall the standard deviations of orientation corrections are less than $5^{\circ}$. The temporal variation in orientation corrections calculated for every 30 days shows no significant change and also standard deviations of them are mostly less than $5^{\circ}$. This means that the orientations of stations used in this study have been kept constant during the period. The sensitivity test for stacking period of the ambient noise cross-correlation method shows that continuous ambient noise record of at least about 30 days is required for estimating reliable orientation corrections.

• Geophysics and Geophysical Exploration
• /
• v.15 no.1
• /
• pp.8-15
• /
• 2012

To estimate the S-wave velocity structure beneath the KS31 broad-band station in Wonju, Korea, we used $H-{\kappa}$ stacking and joint inversion of receiver functions and surface-wave dispersion curves derived from 297 teleseismic events (Mw > 5.5) recorded during the period between 2002 and 2009. We thereby determined that the average depth to a nearly flat Moho is $32.4{\pm}0.5\;km$ within tens of kilometer radius of the seismic station. For the crust at this location, we estimate an average shear-wave velocity of 3.69 km/s and a ratio of P- to S-wave velocities, $V_p/V_s$, of $1.72{\pm}0.04$, as is typical for continental crust. A negative phase in the receiver functions at 1 s indicates the presence of a shearwave low velocity layer in a depth interval of 10 to 18 km in the upper crust beneath the KS31 station.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2B
• /
• pp.100-107
• /
• 2007

Recently, a study of BcN(Broadband convergence Network) is progressing continuously, and it is important to improve the quality of the service according to subscribers because a scale of network is about to be larger. It is more important to manage QoS(Quality of Service) of all subscribers in layer 2 than layer 3 network since managing it in layer 3 network cost both additional processes and large hardware. Moreover, QoS based on Best-Effort service has been developed because tots of subscribers should use limited resource in BcN. However, they want to be supplied with different service even though they pay more charge. Therefore, it is essential to assign the different bandwidth to subscribers depending on their level of charge. The method of current Rate Limiter limits the bandwidth of each port that does not offer fair service to subscribers. The Rate Limiter proposed in this paper limits bandwidth according to each subscriber. Therefore, subscribers can get fair service regardless of switch structure. This new Rate Limiter controls the bandwidth of subscribers according to the information of learning subscriber and manages maximum performance of Ethernet switch and QoS.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.7
• /
• pp.678-685
• /
• 2013

In this paper, we propose a design of dual-band patch antennas for Global Positioning System(GPS) applications, and the designed antenna is used as an individual element of GPS arrays. A low distortion and a high isolation of the array are achieved by adjusting rotating angles of each array element. The antenna consists of two radiating patches that operate in the GPS $L_1$ and $L_2$ bands, and the two ports feeding network with a hybrid chip coupler is adopted to achieve a broad circular polarization(CP) bandwidth. The rotating angles of each antenna element are varied with four directions(${\phi}=0^{\circ}$, ${\phi}=90^{\circ}$, ${\phi}=180^{\circ}$, ${\phi}=270^{\circ}$) in order to minimize the pattern distortion and maximize the isolation among array elements. The measurement shows bore-sight gains of 0.3 dBic($L_1$) and -1.0 dBic($L_2$) for the center element. Bore-sight gains of 1.6 dBic($L_1$) and 1.0 dBic($L_2$) are observed for the edge element. This results demonstrate that the proposed antenna is suitable for GPS array applications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.665-670
• /
• 2020

Buffer layer in CIGS thin-film solar cells improves energy conversion efficiency through band alignment between the absorption layer and the window layer. ZnS is a non-toxic II-VI compound semiconductor with direct-transition band gaps and n-conductivity as well as with excellent lattice matching for CIGS absorbent layers. In this study, the structural and optical properties of ZnS thin films, deposited by RF magnetron sputtering method and subsequently performed by the rapid thermal annealing treatment, were investigated for the buffer layer. The zincblende cubic structures along (111), (220), and (311) were shown in all specimens. The rapid thermal annealed specimens at the relatively low temperatures were polycrystalline structure with the wurtzite hexagonal structures along (002). Rapid thermal annealing at high temperatures changed the polycrystalline structure to the single crystal of the zincblende cubic structures. Through the chemical analysis, the zincblende cubic structure was obtained in the specimen with the ratio of Zn/S near stoichiometry. ZnS thin film showed the shifted absorption edge towards the lower wavelength as annealing temperature increased, and the mean optical transmittance in the visible light range increased to 80.40% under 500℃ conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2852-2859
• /
• 1997

Video-On-Demand system provides electronic video rental services from remote video servers on a broadband communication networks. Most of proposed VOD systems are typically designed for one-to-one conncetion between a user and video server. Therefore, video server stream services to customers individually by allocating a dedicated transmission channel and a set of video server resources for each customer. However, it is inefficiency and wxpensive way when server support multiple users who access the same video stream with a dedicated video channel. Therefore, to achieve cost-effectiveness, batching have studied method that uses multicast communication to simultaneously service all users requesting the same video with a single video with a single video stream. However, the application of the multicast communication by batching detract from the VCR-like function and on-demand nature of the system. In this paepr, we propose a scheme that can support an interactive VCR for all user requesting the same video stream with batching. To reduce a server I/O and network bandwidth requirement, dynamic buffer is allocated to access node which has variable playout poit. Consequently, it makes possible interactive VCR operation as if customer uses true VOD system. Also, this scheme can just deliver a multicast stream without delay after an initial request or VCR action occurred. The policy can guarantee acceptable services to number of users at minimum cost.

• Journal of the Institute of Convergence Signal Processing
• /
• v.18 no.2
• /
• pp.55-61
• /
• 2017

In radio astronomy, high-capacity HDDs are being used to save huge amounts of HDDs in order to record the observational data. For VLBI observations, observational speeds increase and huge amounts of observational data must be stored as they expand to broadband. As the HDD is frequently used, the number of failures occurred, and then it takes a lot of time to recover it. In addition, if a failed HDD is continuously used, observational data loss occurs. And it costs a lot of money to buy a new HDD. In this study, we developed the integrity verification system of the Serial ATA HDD using FirmOS. The FirmOS is an OS that has been developed to function exclusively for specific purposes on a system having a general server board and CPU. The developed system performs the process of writing and reading specific patterns of data in a physical area of the SATA HDD based on a FirmOS. In addition, we introduced a method to investigate the integrity of HDD integrity by comparing it with the stored pattern data from the HDD controller. Using the developed system, it was easy to determine whether the disk pack used in VLBI observations has error or not, and it is very useful to improve the observation efficiency. This paper introduces the detail for the design, configuration, testing, etc. of the SATA HDD integrity verification system developed.

• Archives of design research
• /
• v.12 no.4
• /
• pp.61-68
• /
• 1999

Most of the time, developers spend their energy to analyze the main function of the system or make source codes. As a result, they can not consider user interface on their own system and this is true in most programmer's world. But we want to consider the design concept in developing mechanism. In this case we have to upgrade the legacy system which maintaining the transmission system using the copper cables, and add the transmission system using the optical fiber cables. Therefore we design the user interface make easy for end users who are using the maintaining system on copper cables not to confuse the new system which include optical fibers. Especially, we are consider the developing model of design policy and real user to make easy to use new system. In this paper we will describe the instance to adapt the design concept on Broadband Access Network Operation Support System.

• Applied Biological Chemistry
• /
• v.38 no.6
• /
• pp.584-589
• /
• 1995

To select new useful plants with antibacterial activity, ninety five sample of eighty different species of wild plants were collected, and extracted with methanol. Antibacterial activity of the methanol extracts was tested against Bacillus subtilis, Staphylococcus aureus, Escherichia coli and Vibrio parahaemolyticus. The methanol extracts from Artemisia capillaris, Hemistepta lyrata, Youngia japonica, Prunella vulgaris, Lamium amplexicaule and Juniperus chinensis was effective against all bacterial strains tested, and eight methanol extracts including Ixeris dentata, Gnaphalium affine, Chelidonium majus and Spiraea prunifolia exhibited the antibacterial activity against at least 3 bacterial strains. Methanol extracts from leaf of Syringa vulgaris, Drava nemorosa and clove of Erythronium japonicum showed a selective antibacterial activity against two gram negative bacteria, V. parahaemolyticus, and B. subtilis, respectively. With investigations on antibacterial activity against a certain bacterial strains tested, metahnol extracts from clove of Erythronium japonicum, Spiraea prunifolia, leaf and twig of Camelia japonica, and Drava nemorosa showed strongest activities against B. subtilis, S. aureus, E. coli, and V. parahaemolyticus, respectively. Nine methanol extracts based on the results were successively fractionated with n-hexane, chloroform, ethyl acetate and water portions, which were examined antibacterial activity against B. subtilis and V. parahaemolyticus. Among the all fractions tested, chloroform fractions of Hemistepta lyrata showed strongest antibacterial activity against both B. subtilis (17mm) and V. parahaemolyticus (29 mm). Chloroform fractions of Youngia japonica, n-hexane fractions of Artemisia capillaris, Iexeris dentata and Prunella vulgaris, and ethyl acetate fraction of leaf and twig of Camelia japonica showed relatively a strong antibacterial activity. On the other hand, Juniperus chinensis and Equisetum arvense was distributed to all fractions except for water fraction.