• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1467-1468
• /
• 2006

본 논문에서는 현재 운용되고 있는 낙뢰탐지 시스템들과는 다른 측위방식인 TDOA(Time Difference of Arrival)방법을 사용한 3차원 낙뢰 탐지 및 추적 시스템을 제안한다. TDOA방식은 낙뢰와 수신국사이의 도달시간을 측정하여 두 수신국간의 시간차가 일정한 쌍곡선을 얻고 이들 쌍곡선의 교점을 이용해 낙뢰의 위치를 결정하는 방법이다. 이 시스템을 이용하여 위치정확도가 수 미터인 3차원 낙뢰 방전 궤적을 얻을 수 있다. 시스템의 구현을 위해서 먼저 낙뢰의 신호를 저장해야 하는데, 광대역의 낙뢰신호를 저장하기 위해서는 고속의 디지타이저가 필요하다. 그러나 디지타이저와 프로세서간의 인터페이스의 한계로 연속적으로 이를 저장하는 것은 어려우며, 이러한 신호 저장의 문제점을 해결하기 위해서 낙뢰 신호 저장 시스템이 필요하다. 본 논문에서는 낙뢰의 메커니즘과 광대역 낙뢰신호 검출기법을 설명하고, 구현한 낙뢰 신호 저장 시스템을 소개한다.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1241-1249
• /
• 2011

There are TOA, TDOA and AOA method to estimate the position of the electromagnetic wave transmitter by using the multiple receivers at the fixed position. Among these methods, AOA method is suitable for the jammer localization system. Because TOA method can be adopted for the clocks of the transmitter and the receiver are synchronized each other, and TDOA method can be only adopted for a broad-band jamming signal. This paper, therefore, analyzes the characteristics of the AOA measurements and the sensitivity of the positioning performance according to the system design parameters. Based on the analyzed results, the jammer localization system to meet the desired performance is designed, and it has been checked that the positioning error for the jammer located at a distance of 10km is lower than 38m through the simulation results.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.27-31
• /
• 2003

Underwater acoustic navigation systems are classified into three systems: ultra-short baseline (USBL), short baseline (SBL), and long baseline (LBL). Because the USBL system estimates the angle of a submersible, the estimation error becomes large if the submersible is far from the USBL transducer array mounted under a support vessel. SBL and LBL systems estimate submersible's location more accurately because they have wider distribution of measuring sensors. Especially LBL systems are widely used as a navigation system for deep ocean applications. Although it is most accurate system it still has estimation errors because of noise, measurement error, refraction and multi-path of acoustic signal, or wrong information of the distributed transponders. In this paper the estimation error of the LBL system are analyzed from a point of sensitivity. It is assumed that the error exists only in the distance between a submersible and the transponders. For this purpose sensitivity of the estimated position with respect to relative distances between them is analyzed. The result says that estimation error is small if the submersible is close to transponders but not near the ocean bottom.

• Journal of Platform Technology
• /
• v.9 no.4
• /
• pp.60-70
• /
• 2021

This paper proposes a method capable of stably tracking the coordinates of a patterned laser image in a curved screen shooting system using two or more channels of multiple cameras. This method can track and acquire target points very effectively when applied to a multi-screen shooting method that can replace the HMD shooting method. Images of curved screens with severe deformation obtained from individual cameras are corrected through image normalization, image binarization, and noise removal. This corrected image is created and applied as an Euclidean space map that is easy to track the firing point based on the matching point. As a result of the experiment, the image coordinates of the pattern laser were stably extracted in the curved screen shooting system, and the error of the target point position of the real-world coordinate position and the broadband Euclidean map was minimized. The reliability of the proposed method was confirmed through the experiment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.943-953
• /
• 2009

In this paper, we propose a radio sensor to measure the position of the sun for the solar tracker of a photovoltaic system. In order to satisfy the requirement for the measurement accuracy within ${\pm}5^{\circ}$, the sensor receiver with high gain, high sensitivity and wide bandwidth is designed and implemented. The receiver has the bandwidth of 104 MHz, the system gain of 69 dB and the sensitivity of 0.46 K at 5.1 GHz. The processes of design and implementation of the radio sensor receiver are described in this paper. The effectiveness of the proposed radio sensor in the measurement of the position of the sun is demonstrated experimentally under the condition of cloud cover. The results show the radio sensor can measure the position of the sun within the accuracy of ${\pm}4^{\circ}$ successfully.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.23-30
• /
• 2010

This paper presents implementation details of car communications system based on V2I2V model over broadband wireless networks including WCDMA, HSDPA and WiBro. Also, we measures the major performance metrics such as Round Trip Time, end-to-end latency and others between in-vehicle client and location management system by driving across urban areas in Daegu city. Analysis of experimental results would be helpful to consider the applicability of traffic safety services using V2I2V-based car communications over various broadband wireless networks.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.85-90
• /
• 2022

In this study, in order to test the performance of the aircraft system, a threat signal simulator that can transmit a signal similar to the actual threat to the aircraft under test with high power was designed. The high-power threat signal simulator should be able to transmit broadband (UHF band, L band, S band, X band) communication signals and radar signals, and control to transmit signals accurately directed to the aircraft through interfacing tracking radar. The signal strength of the developed equipment is 63 dBm to 93 dBm or more depending on type of signal, and the tracking precision is less than 0.1 degree, which satisfies the required performance. And it was confirmed that the antenna of the high-power threat signal simulator can accurately direct the signal to the aircraft position through the tracking radar interfacing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1544-1550
• /
• 2013

In recent years, Container Security Device(CSD) using GPS & GLONASS to improve logistics efficiency are being extensively researched. The purpose of this paper is to examine the performance development antenna usable cargo container security transport. Antenna developed by study were optimized to match logistics environment apply to GPS/GLONASS dual frequency for monitering system. The measure of antenna have confirmation about frequency characteristics each 1575.42MHz, 1602MHz and VSWR is 2:1 measured in return loss -9.54dB. Reliability of this antenna has been verified about GPS/GLONASS through test-operation between the south korea and Russia.