• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1388-1398
• /
• 2012

SAR(Synthetic Aperture Radar) systems can provide images of wide coverage in day, night, and all-weather conditions. However wideband SAR systems are known to be vulnerable to interferences from other devices operating at in-band or adjacent spectrums and this may lead to image corruptions. In this paper, a SAR point target simulator is developed that provides performance analysis on image distortion caused by interferences from other devices. Interference signals are generated based on the experimental data observed from acquired SAR raw data. Simulation results include typical SAR performance measures such as spatial resolution, peak to sidelobe ratio and integrated sidelobe ratio. Finally, SAR target simulations are performed and shown to correspond to the image corruptions found in real SAR missions affected by RF interferences.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7582-7588
• /
• 2015

Noncoherent receivers are favored for block-code-modulated ultrawideband impulse radio (UWB-IR) systems because of their low implementation complexity compared with coherent rake receivers. However, existing noncoherent schemes, such as transmitted reference (TR) systems and averaged differential receivers (ADR), suffer from performance degradation and energy efficiency loss. Codeword matching and signal aggregation (CMSA) is a low complexity noncoherent receiver for UWB-IR. As the frame/symbol duration is shortened to boost data rate, interframe interference (IFI) or intersymbol interference (ISI) occurs and degrades the detection performance of CMSA. In this paper, block coded correlator which consists of the delay components and the reference signal is proposed to improve the performance of the receiver. Simulation results show that the proposed system leads to the better performance compared to the conventional CMSA receiver.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.8
• /
• pp.357-368
• /
• 2013

Our society has evolved into a fully connected society in a mixed reality environment enabling various knowledge sharing / management / control / creation due to the expansion of broadband ICT infrastructure, smart devices, cloud services and social media services. Therefore cyber threats have increased with the convenience. The society of the future can cause more complex and subtle problems, if you do not have an effective response to cyber threats, due to fusion of logical space and physical space, organic connection of the smart object and the universalization of fully connected society. In this paper, we propose the strategy to build knowledge-base as the basis to actively respond to new cyber threats caused by future various environmental changes and the universalization of fully connected society.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.385-395
• /
• 1999

Video-On-demand system provides electronic video rental services from remote video servers on a broadband communication networks. When we assume some situation that serve the same video stream by batching, each time single video stream became available at server-end side, we face the problem that what video stream to be scheduled at what time instant. Hence, in order to manage the resource bandwidth which is different at each stream, the policy of channel allocation became important factor. In this work, we proposed three type of scheduling policies with queueing, as are cumulative Waiting Time(CWT), Mean Waiting Time(MWT) and Predictable Popular Factor(PPF). While CWT policy is good for popular video, MWT policy was good for non-popular video. Also, we know that PPT policy has some fairness for average wait time and reneging rate of user requests.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.321-326
• /
• 2003

We constructed grating- tuned external cavity semiconductor lasers using Littman and Littrow configuration, for which the wavelengths are tuned by rotation of the grating. This wavelength tunable semiconductor laser is one of the main devices of WDM optical communication. In Littman configuration, the wavelength range of about 60 nm (The C- and L-band range of 1,530~1,590 nm) was obtained by changing the incidence angle of the grating about $\pm$1$^{\circ}$ from the incidence angle of 70$^{\circ}$. In the 40 nm tuning range, the output power variation was less than 1.25 ㏈ and the side mode suppression ratio(SMSR) was 32 ㏈. In Littrow configuration (The incidence angle and the first order diffraction angle is the same, i.e. $\alpha$=$\delta$), the wavelength tuning range was about 80 nm for the same conditions used in Littman configuration except the incidence angle ($\alpha$=49$^{\circ}$). In 60 nm tuning range, the output power variation was less than 1.5 ㏈ and SMSR was 35 ㏈.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.6
• /
• pp.438-444
• /
• 2019

In this paper, we proposed a 16-element array antenna design to improve signal detection performances. The array antenna characteristics, such as mutual coupling, pattern deviation, and half power beamwidth of the active element, were examined to obtain an optimal spacing between individual elements. The single element of the array antenna consists of an indirect feed using L-shaped feed and shorted radiating patch to achieve a broadband operation. Root mean square(RMS) errors based on the incident angle of the signal were calculated to verify the signal detection performance of the proposed antenna. The results demonstrate that the proposed array antenna with optimal spacing is suitable for detecting interference signals with low RMS error.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.423-429
• /
• 2019

Recently, a variety of methods for the performance improvement of ultra-high speed wideband wireless transmission systems have been suggested. This paper proposes a space-frequency (SF) block coded single side band (SSB) single carrier (SC)-frequency division multiple access (FDMA) transmission system. In the proposed SSB SC-FDMA system, SF block code is implemented with the complex conjugates, which are formed from discrete Fourier transform (DFT) spreading of pulse amplitude modulation (PAM) signals. As a result, transmit diversity gain can be obtained in the proposed SF block coded SSB SC-FDMA system without any significant increase of the system computational complexity. The simulation result shows that the signal-to-noise power ratio (SNR) performance of the proposed SF block coded SSB SC-FDMA system is approximately 4 dB better than the SNR performance of the conventional SSB SC-FDMA system with single transmit antenna at a symbol error rate (SER) of $10^{-2}$.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.85-90
• /
• 2022

In this study, in order to test the performance of the aircraft system, a threat signal simulator that can transmit a signal similar to the actual threat to the aircraft under test with high power was designed. The high-power threat signal simulator should be able to transmit broadband (UHF band, L band, S band, X band) communication signals and radar signals, and control to transmit signals accurately directed to the aircraft through interfacing tracking radar. The signal strength of the developed equipment is 63 dBm to 93 dBm or more depending on type of signal, and the tracking precision is less than 0.1 degree, which satisfies the required performance. And it was confirmed that the antenna of the high-power threat signal simulator can accurately direct the signal to the aircraft position through the tracking radar interfacing.

• Journal of Software Assessment and Valuation
• /
• v.15 no.2
• /
• pp.101-109
• /
• 2019

Lasers for optical broadband communication systems should have excellent frequency selectivity and modal stability. DFB(Distributed Feedback) lasers have low lasing frequency shift during high speed current modulation. In this paper, I have developed a simulation software and analysed threshold gain and lasing frequency of a lasing mode in longitudinal direction of an 1.55um DFB laser with two mirrors and without anti-reflection coatings, that have both an index- and gain-gratings. The grating phase on a left mirror face is fixed as π/2 and the grating phase on a right mirror face is varied. As the phases of the index and gain gratings on the right mirror facet are π and 0, κL should be in the range of 2~6 in order to enhance the frequency stability. In order to reduce the threshold current of a lasing mode, κL should be greater than 8, regardless of the grating phases on the mirror faces.

• Journal of Software Assessment and Valuation
• /
• v.15 no.1
• /
• pp.71-78
• /
• 2019

Lasers for optical broadband communication systems should have excellent frequency selectivity and modal stability. DFB lasers have low lasing frequency shift during high speed current modulation. In this paper, we have developed a simulation software and analysed beam profiles of a lasing mode in longitudinal direction of an 1.55um DFB laser with two mirrors and without anti-reflection coatings, that have both an index- and gain-gratings. As the phases of the index and gain gratings on the mirror faces are varied, the beam profiles |R(z)| and |S(z)| of the lasing mode with the emitted power ratio P_l/p_r are analysed and examined. In order to reduce the threshold current of a lasing mode and enhance the frequency stability, κL should be greater than 8, regardless of the grating phases on the mirror faces.