• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1154-1160
• /
• 2010

In this paper, a novel printed meander monopole antenna is proposed for wireless USB dongle applications. Dual-wideband resonance is obtained by utilizing a printed meander monopole radiator. The proposed antenna was fabricated on a thin FR-4 substrate with a thickness of 1 mm and a dielectric constant of 4.6. The antenna is fed by a $50{\Omega}$ coaxial cable. This novel USB dongle antenna measures only $10{\times}50mm^2$. The measured results demonstrates that the antenna supports WiBro, Bluetooth/ISM, WLAN, S-DMB, and WiMAX service bands.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.342-348
• /
• 2015

High speed implementation of digital filters is required in high data rate applications such as hard-wired wide band modem and high resolution video codec. Since the critical path of the digital filter is the MAC (multiplication and accumulation) circuit, the filter coefficient with sparse non-zero bits enables high speed implementation with adders of low hardware cost. Compressive sensing has been reported to be very successful in sparse representation and sparse signal recovery. In this paper a filter design method for digital FIR filters with CSD (canonic signed digit) coefficients using compressive sensing technique is proposed. The sparse non-zero signed bits are selected in the greedy fashion while pruning the mistakenly selected digits. A few design examples show that the proposed method can be utilized for designing sparse CSD coefficient digital FIR filters approximating the desired frequency response.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.8
• /
• pp.12-20
• /
• 1998

All-optical networks(AON) are emerging as the next generation broadband networks for wide-area and local-area networks. Many optical switch architectures are currently proposed to realize AON. Specially, optical switches using WDM have a lot of advantages in point of the optical transparency and network topology for B-ISDN services in AON. In this paper, two kinds of Knockout Optical Switching Architectures(KOSA) are proposed for high speed optical ATM networks. We use WDM technologies for them to operate in all-optical area and they are called Architecture-Ⅰ, Architecture-Ⅱ respectively. Each one represents different characteristics according to the number of components and the kind of components, which make KOSA have different performance and system complextity. In order to verify and to compare the performance, these architectures were analyzed and simulated in terms of cell loss ratio, system complexity and buffering speed.

• Proceedings of the Technology Innovation Conference
• /
• 2003.06a
• /
• pp.90-107
• /
• 2003

참여정부의 출범과 한께 과학기술계에서는 동북아 과학기술 허브 구축방안 논의가 활발히 진행되고 있으나, 현재까지 이러한 논의는 법제도의 정비 및 과학기술특구 건설 등의 이슈에 한정되고 있는 실정이며, 더욱이 이를 뒷받침할 실증적 연구는 미미하다. 허브란 개념이 네트워크에서의 중심성(centrality)을 의미 하며, 현재 및 미래의 과학학기술협력 네트워크 발전에 정보통신기술이 중요한 역할을 수행함을 고려할 때, 우리나라의 초고속통신망 인프라를 십분 활용한 차세대 과학기술 정보인프라의 구축을 통한 동북아 사이버 연구네트워크상의 허브화(궁극적으로는 e-Science의 허브화를 지향)는 지역 클러스터 건설을 통한 물리적 허브화 못지 않게 중요하다 하겠다. 본 연구는 먼저 네트워크 분석기법을 동아시아의 과학기술협력 네트워크에 적용하여 주요 네트워크 지수를 실증적으로 진단하고, 특히 이를 유럽연합의 과학기술협력 네트워크의 패턴과 비교 분석하였다. 유럽 연합은 1984년부터 과학기술 협력 프로그램인 Framework Program을 시작하여 일찍부터 역내 과학기술협력 프로그램을 운영해 온 경험을 가지고 있고, 2000년부터는 자발적 협력과 네트워킹을 통해 유럽의 연구 개발 활동을 통합·조정하기 위해 새롭게 제안된 유럽 연구개발권 (European Research Area) 형성이 구체화되고 있어, 동북아 과학기술협력 네트워크를 건설하는데 좋은 벤치마킹 대상이라 할 수 있다. 이 보고서에서는 유럽 연구개발귄이라는 우산 아래서 유럽의 과학기술 활동이 조정 및 통합되는 과정을 살펴보고, 이를 위한 과학기술 정보인프라의 주요 기능을 컨텐트 (연구정보서비스와 메타데이터 표준), 시스템 (슈퍼 컴퓨팅, 광대역 네트워크, GRID), e-Science 응용연구 별로 살펴보았다. 끝으로 유럽의 경험을: 교훈삼아 동북아 e-Science 네트워크의 건설을 위한 정책적 시사점과 동북아 연구개발정보 Portal 및 APEC APGrid 연구망 등의 구체적인 정보인프라 구축방안을 도출하였다.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.549-555
• /
• 2011

In this paper, inverted triangle structural planar monopole antenna with Edge for UWB Communication (3.1 ~ 10.6 GHz) is presented. The antenna have broadband property structurally through inverted triangle structural planar monopole which have edge. Monopole and ground of proposed antenna exist on coplanar plane, and excite as CPW. It used FR4 dielectric substrate of ${\epsilon}_r=4.4$, and the size is $20{\times}20{\times}1.6mm$. Return loss is more than - 10dB in 3.1 ~ 10.1 GHz (7.0 GHz). Radiation pattern is about the same that of dipole antenna at all frequency. At measured result, max gain is 8.44 dBi at E - plane.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.428-434
• /
• 2017

In recent years, owing to the growing user demand for the two-way internet service based on the mobile global broadband communications, a new type of satellite terminal has been developed, known as ESIM(Earth Station in Motion). This service was required by Resolution 158(WRC-15) to study on the coexistence with the co-primary FS(Fixed Service) in 27.5-29.5 GHz as a FSS(Fixed Satellite Service) uplink. In this paper, the average received power on ESIM within -10 dB of beam width of FS and its outage probability was analyzed theoretically and also simulated to account for the azimuth angle with uniform distribution. From the results, it can be concluded that this theoretical analysis is very useful to analyze the interference from ESIM into FS based on the statistical and probabilistic method. Therefore, it is necessary to control the azimuth angle due to a moving terminal as well as the inclination angle of moving path, the operation hours, and the speed of ESIM to protect the co-primary FS.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.817-826
• /
• 2005

BcN(Broadband convergence Network) is being developed in order to support a variety of network applications, with enhanced capabilities of QoS(Quality of Service) provisioning and security, and IPv6. In a high-speed network environment such as BcN, it if more likely for the network resources to be exposed to various intrusion activities. The propagation speed of intrusion is alto expected to be much faster than in the existing Internet In this paper, we present a multi-domain security management framework which my be used for a global intrusion detection at multiple domains of BcN and describe its characteristics. For the performance evaluation, we first present test results for the security node and compare with other products. Then we design and Implement an OPNET simulator for the proposed framework, and present some simulation results. In the simulation model, we focus on the performance of alert information in the security overlay network.

• Journal of KIISE:Software and Applications
• /
• v.32 no.10
• /
• pp.963-973
• /
• 2005

Increasing attention is being recently devoted to various problems inherent in the topological design of networks systems. The topological structure of these networks can be based on service centers, terminals (users), and connection cable. Lately, these network systems are well designed with tiber optic cable, because the requirements from users become increased. But considering the high cost of the fiber optic cable, it is more desirable that the network architecture is composed of a spanning tree. In this paper, we present a GA (Genetic Algorithm) for solving bicriteria network topology design problems of wide-band communication networks connected with fiber optic cable, considering the connection cost, average message delay, and the network reliability We also employ the $Pr\ddot{u}fer$ number (PN) and cluster string in order to represent chromosomes. Finally, we get some experiments in order to certify that the proposed GA is the more effective and efficient method in terms of the computation time as well as the Pareto optimality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1982-1987
• /
• 2013

In this paper, a design method to obtain a band rejection characteristic in the 2.4-2.484 GHz WLAN band is studied for a series-fed dipole pair (SDP) antenna operating in the band of 1.7-2.7 GHz for mobile communication base station applications. The band rejection characteristic is achieved by inserting U-shaped slots on the coplanar strip line connecting the two dipole elements of the SDP antenna. The effects of the location and dimension of the slots on the rejection band characteristics are examined. The optimized SDP antenna with WLAN band rejection is fabricated on an FR4 substrate and the experimental results show that the antenna has a desired band rejection performance with a frequency band of 1.65-2.78 GHz (51.0%) for a VSWR < 2, and a rejection band of 2.39-2.54 GHz.

• Journal of KIISE:Information Networking
• /
• v.32 no.2
• /
• pp.236-243
• /
• 2005

Most of the existing legacy DSL networks, about 80 million lines world-widely, adopted ‘ATM(Asynchronous Transfer Mode) over DSL’protocol architecture for the effective interworking with the ATM-based regional backbone networks and for the effective support of native ATM-based multimedia application services. Recently, however, the regional backbone networks are moving towards Metro Ethernet networks, instead of the ATM networks, and most of the current multimedia applications are If-based, not native ATM-based. These environmental changes push the architecture of DSL networks to be accordingly changed, and the‘Ethernet over DSL’protocol architecture, instead of existing‘ATM over DSL’, is tried to be applied to the implementation of next generation DSL networks such as VDSL(Very high-rate DSL) . In this paper, we propose two different implementation models for next generation DSL networks in Metro Ethernet backbone environments, respectively EA(Ethernet-to-ATM) implementation model and RE(Ethernet-to-Ethernet) implementation model. And, a comparative analysis focused on the performance and the backward compatability with the legacy DSL networks will be presented.