• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.691-698
• /
• 2010

In this study Al-doped ZnO (AZO) thin films have been fabricated on Eagle 2000 glass substrates at various substrate temperature ($100{\sim}500^{\circ}C$) and working pressure (10 ~ 40 mTorr) by RF magnetron sputtering in order to investigate the structural, electrical, and optical properties of the AZO thin films. The obtained films were polycrystalline with a hexagonal wurtzite structure and preferentially oriented in the (002) crystallographic direction. The AZO thin films, which were deposited at $T=300^{\circ}C$ for 10 mTorr, shows the highest (002) orientation, and the full width at half maximum (FWHM) of the (002) diffraction peak is $0.42^{\circ}$. The lowest resistivity ($2.64{\times}10^{-3}\;{\Omega}cm$) with the highest cartier concentration ($5.29{\times}10^{20}\;cm^{-3}$) and a Hall mobility of ($6.23\;cm^2/Vs$) are obtained in the AZO thin films deposited at $T=300^{\circ}C$ for 10 mTorr. The optical transmittance in the visible region is approximately 80%, regardless of process conditions. The optical band-gap depends on the Al doping level as the substrate temperature increases and the working pressure decrease. The optical band-gap widening is proportional to cartier concentration due to the Burstein-Moss effect.

• Korean Journal of Materials Research
• /
• v.22 no.4
• /
• pp.195-201
• /
• 2012

$Ce^{3+}$-doped yttrium aluminum gallium garnet (YAGG:$Ce^{3+}$), which is a green-emitting phosphor, was synthesized by solid state reaction using ${\alpha}$-phase or ${\gamma}$-phase of nano-sized $Al_2O_3$ as the Al source. The processing conditions and the chemical composition of phosphor for the maximum emission intensity were optimized on the basis of emission intensity under vacuum UV excitation. The optimum heating temperature for phosphor preparation was $1550^{\circ}C$. Photoluminescence properties of the synthesized phosphor were investigated in detail. From the excitation and emission spectra, it was confirmed that the YAGG:$Ce^{3+}$ phosphors effectively absorb the vacuum UV of 120-200 nm and emit green light positioned around 530 nm. The crystalline phase of the alumina nanoparticles affected the particle size and the luminescence property of the synthesized phosphors. Nano-sized ${\gamma}-Al_2O_3$ was more effective for the achievement of higher emission intensity than was nano-sized ${\alpha}-Al_2O_3$. This discrepancy is considered to be because the diffusion of $Al^{3+}$ into $Y_2O_3$ lattice is dependent on the crystalline phase of $Al_2O_3$, which affects the phase transformation of YAGG:$Ce^{3+}$ phosphors. The optimum chemical composition, having the maximum emission intensity, was $(Y_{2.98}Ce_{0.02})(Al_{2.8}Ga_{1.8})O_{11.4}$ prepared with ${\gamma}-Al_2O_3$. On the other hand, the decay time of the YAGG:$Ce^{3+}$ phosphors, irrespective of the crystalline phase of the nano-sized alumina source, was below 1 ms due to the allowed $5d{\rightarrow}4f$ transition of the $Ce^{3+}$ activator.

• Korean Journal of Remote Sensing
• /
• v.28 no.5
• /
• pp.501-508
• /
• 2012

Albedo is known as a factor that directly impacts on the surface energy balance one of the elements of earth radiation balance. The change of albedo includes the change of soil moisture, vegetation, solar zenith angle, snow, and so on. In addition, it operates as a crucial path to understanding feedback mechanisms between radiation balance and its influence on climate and vegetation dynamics and therefore, observing the variation of albedo is a one of the essential procedures for anticipating climate change. In this study, we used MODIS 16-Day composited Albedo data from 2001 to 2011 years with the purpose of observing the change of albedo over Northeast Asia. According to the tendency of albedo for 11 years, albedo in the area of an active vegetation has increased in near-infrared (NIR) domain and decreased in visible (VIS) domain. On the basis of local changes in vegetation in 2002, the both area of the Gobi Desert and the Manchuria was enormously changed and chosen the research area and furthermore, the vegetation of both regions had deteriorated due to the change of the minimum value since 2010.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.151.2-151.2
• /
• 2010

우리나라는 "제 3차 신재생에너지 기술개발 및 이용 보급 기본계획"을 통해 2030년까지 111.5조 원을 투자하여 전체 에너지의 11%를 신재생에너지로 공급한다는 목표를 설정하였다. 그러나 신재생에너지는 기존의 원자력이나 화석에너지에 비하여 생산비용이 높아 보조나 융자 등의 정부지원에 의존하여 보급이 이루어져왔다. 신재생에너지 보급확대 및 산업발전을 위한 보급정책의 일환으로 정부는 2012년부터 RPS(Renewable Portfolio Standard, 신재생에너지 공급의 무화제도)를 도입키로 확정하였다. RPS의 도입은 일정규모 신재생에너지 시장수요를 창출함과 동시에 신재생에너지원간 가격경쟁 구도 형성의 유인이 될 수 있다. 이는 전력가격 일괄상승 및 녹색가격제도(Green Pricing) 등의 정책적 논의로 이어질 수 있다. 따라서 소비자 측면에서 신재생에너지 전력의 가치를 어떻게 평가하는지를 분석하여 RPS 시행제반의 정책적 논의의 기초자료를 마련할 필요가 있다. 특히 RPS는 신재생에너지원 간의 경쟁을 가능하게 하므로 개별 신재생에너지원에 따라 소비자 선호의 차이가 어떻게 나타나는지 연구되어야 한다. 이에 본 연구는 환경재 혹은 비시장재화의 가치추정에 가장 널리 활용되고 있는 조건부가치평가법(Contingent Valuation Method; CVM)을 적용하여 풍력, 태양광, 수력으로 생산한 전력에 대한 소비자의 지불의사액(Willingness to Pay; WTP)을 분석하는 모형을 수립하였다. 이를 위해 Zografakis et al.(2010), Yoo and Kwak(2009), 이창훈 황석준(2009), Nomura and Akai(2004), Bately et al.(2001) 등의 선행연구를 참조하여 신재생에너지 전력 가치의 설문에서 고려되어야 하는 요인들을 선정하였다. 이를 토대로 설문 시나리오를 작성하여 각 요인들이 신재생에너지 전력에 대한 지불의사액 결정에 어떠한 영향을 미치는지 분석가능한 모형을 설정하였다. 뿐만 아니라 기존 연구들이 신재생에너지로 생산된 일반적인 전력에 대한 지불의사액을 질문하는데 그쳤다면, 본 연구에서는 각 원별로 지불의사액의 차이를 도출할 수 있는 설문모형을 구축하는데 중점을 두었다. 본 연구결과는 향후 설문수행을 통하여 신재생에너지원별로 소비자의 선호를 분석할 수 있는 연구로 발전될 수 있으며, 이는 RPS 도입으로 인한 전력가격 정책 수립의 기초 연구자료로 활용될 수 있다 하겠다.

• Journal of Plant Biotechnology
• /
• v.44 no.2
• /
• pp.171-177
• /
• 2017

A callus-mediated regeneration protocol for sea-milkwort, an endangered coastal plant species in South Korea, is reported here. The explants of in vitro-plantlets generated from a node culture revealed distinguishable responses in callus induction depending on genotype, explant source, light condition, and 2,4-D concentration. Especially, continuous darkness exclusively facilitated callus induction from explants prior to other treatments. The calli initiated on the media with 2,4-D ranging from 0.1 mg/L to 3.0 mg/L in the dark vigorously proliferated when subcultured on the same media in continuous darkness. Given 1.0 mg/L zeatin in addition to darkness to the calli of the 'Pistachio' genotype, normal adventitious shoots were only regenerated from nodular structures that formed earlier from the calli at the frequency of 24.4 percent. Regenerated shoots easily grew into plantlets with roots and green color on a phytohormone-free MS medium under lighted condition, that were used for node culture as plant materials. Node culture effectively multiplied plantlets in accordance with protocol by Bae et al. (2016). Acclimatized plantlet clusters developed mature plant clusters under inland environment, followed by flowering the following April. Results were merged with node culture protocol suggested by Bae et al. (2016), which, as an in vitro propagation system for sea-milkwort, may contribute to natural habitat restoration.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.252-252
• /
• 2016

최근 학계나 산업계에서 indium tin oxide (ITO)의 높은 전기 전도도 및 광투과율을 이용하여 줄 발열을 기초로 하는 투명 면상 발열체에 대한 연구가 활발히 진행 되고 있다. 하지만 단일 ITO 박막으로 제작한 투명 면상 발열체는 온도가 상승함에 따라 균일하게 발열 되지 않으며, 글라스의 곡면 부분에서 유연성이 부족하여 크랙이 발생하는 다양한 문제점들을 가지고 있다. 이를 해결하기 위해 ITO의 결정화 온도 $160^{\circ}C$ 이상의 고온공정 또는 증착 후 열처리가 필요 하는 추가적인 공정이 필요하다. 따라서 본 연구에서는 단일 ITO 박막의 단점을 개선하는 ITO/Ag/ITO 하이브리드 구조의 투명 면상 발열체를 제작하여 전기적, 광학적 특성을 비교하고 발열량, 온도 균일성, 발열 유지 안정도를 조사하였다. 본 연구에서는 $50{\times}50mm$ 크기의 non-alkali glass (Corning E-2000) 기판 상에 마그네트론 스퍼터링 공정으로 상온에서 ITO/Ag/ITO 박막을 연속적으로 증착 하여 다층구조의 하이브리드 형 투명 면상 발열체를 제조하였다. 박막 증착 파워는 DC (Ag) power 100 W, RF (ITO) power 200 W로 하였으며 ITO박막두께는 40 nm로 고정 시키고 Ag박막 두께는 10 ~ 20 nm로 변화를 주었다. 증착원은 3인치 ITO 단일 타깃(SnO2, 10 wt.%)과 Ag 금속 타깃 (순도 99.99%)을 사용하였으며, 고순도 Ar을 이용하여 방전하였으며 총 주입량은 20 sccm, working pressure는 1.0 Pa을 유지하였다. 증착전 타깃 표면의 불순물 제거와 방전의 안정성을 유지하기 위해 10분간 pre-sputtering을 진행하고 증착하였다. 증착한 박막의 전기적, 광학적 특성은 각각 Hall-effect measurements system (ECOPIA, HMS3000), UV-Vis spectrophotometer (UV-1800, SHIMADZU)으로 측정하였으며, 하이브리드 표면의 구조 및 형상은 field emission-scanning electron microscopy (FE-SEM, Hitachi S-4800)으로 관찰하였다. 또한 투명 면상 발열체의 성능은 0.5 ~ 3 V/cm의 다양한 전압을 power supply (Keithly 2400, USA)를 통해서 시편 양 끝단에 인가한 후 시간에 따른 투명면상 발열체의 표면 온도변화를 infrared thermal imager (IR camera, Nikon)를 이용하여 관찰하였다. 하이브리드 구조를 가진 ITO박막의 두께는 40 nm로 고정 시키고 Ag박막의 두께는 10, 15, 20 nm로 변화를 주었다. 이들 박막의 면저항 값은 각각 5.3, 3.2, $2.1{\Omega}/{\Box}$였으며, 투과도는 각각 86.9, 81.7, 66.5 %였다. 이에 비해 두께 95 nm의 단일 ITO박막의 면저항 값은 $59.5{\Omega}/{\Box}$였으며, 투과도는 89.1 %였다. 하이브리드 구조의 전기적특성은 금속층의 두께가 증가할수록 캐리어 농도 값이 증가함에 따라 비저항 값이 감소되어 면저항 값도 감소된 것이며, 금속 삽입층의 전도특성이 비저항에 큰 영향을 주고 있음을 보여준다. 하지만 금속 층의 두께가 증가할수록 Ag층이 연속적인 막을 형성하여 반사율이 증가함에 따라 투과도가 감소하였다. 따라서 하이브리드 구조를 가진 투명 면상 발열체에 금속 삽입층의 두께 조절은 매우 중요한 인자임을 확인 할 수 있었다. 또한 발열성능을 평가 하기 위해 시편 양 끝단에 3 V전압을 인가한 결과, 금속 삽입층의 두께가 10 nm에서 5 nm씩 증가한 하이브리드 구조를 가진 투명면상 발열체의 최고 온도는 각각 98, 150, $167^{\circ}C$ 였으며, 단일 ITO의 최고 온도는 $32^{\circ}C$였다. 이 것은 동일한 두께 (95 nm)의 단일 ITO 박막과 비교하여 면저항이 낮은 하이브리드 박막의 발열량은 약 $120^{\circ}C$로 발열효율이 매우 우수한 것을 확인 할 수 있었다.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.470-476
• /
• 2015

In this study, three dicaffeoylquinic acids (DCQAs) isolated from Gnaphalium affine D. DON. extracts were structurally identified and evaluated for their antioxidant activities, cellular protective effects, and tyrosinase inhibitory activities. The ethyl acetate fraction of G. affine was chromatographed, which yielded 3 DCQA derivatives of 1-3 : 3,5-dicaffoylquinic acid (3,5-DCQA, 1), 4,5-dicaffeoylquinic acid (4,5-DCQA, 2), 1,5-dicaffoylquinic acid (1,5-DCQA, 3). The structure of each compounds was determined using $^1H$ NMR and MS analyses. Compounds of 1-3 showed strong free radical (1,1-diphenyl-2-picrylhydrazyl, DPPH) scavenging activities ($FSC_{50}=3.70$, 5.80, and $5.50{\mu}M$, respectively) compared to those of a commonly used lipophilic antioxidant, (+)-${\alpha}$-tocopherol ($21.90{\mu}M$). Cellular protective effects of 1-3 compounds on the $^1O_2$ sensitized photohemolysis of human erythrocytes were similar to (+)-${\alpha}$-tocopherol. 1-3 compounds also exhibited higher tyrosinase inhibitory effects ($IC_{50}=0.15$, 0.16, and 0.13 mM) compared to arbutin (0.33 mM), known as a skin-whitening agent. These results indicate that three DCQA derivatives may be applied as an antioxidant and a skin whitening agent in food or cosmetic industries.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.2
• /
• pp.5-11
• /
• 2016

$MWCNT-TiO_2$ nano composites and $Ag-MWCNT-TiO_2$ nano composites were prepared from Multi-Walled Carbon NanoTube (MWCNT), titanium (IV) butoxide (TNB) solution and silver nitrate ($AgNO_3$) by the sol-gel method. The dispersion and structure of Ag in the synthesized composites was observed by Scanning Electron Microscopy (SEM) and Field Emission Transmission Electron Microscopy (FE-TEM). X-Ray Diffraction (XRD) patterns of the composites showed that the composites contained an anatase phase. The Energy Dispersive X-ray spectroscopy (EDX) showed the presence of C, O, Ti and Ag peaks. The $TiO_2$ particles were distributed uniformly in the MWCNT network, and Ag particles were virtually fixed on the surface of the tubes. Also decomposition of the methylene blue was investigated according to UV radiation times for study photocatalytic activity. $Ag-MWCNT-TiO_2$ nano composites show high photodegradation than $MWCNT-TiO_2$ nano composites. The results indicate that the high conductivity of Ag improved the photoactivity of the $MWCNT-TiO_2$ composite.

• Journal of the Korean earth science society
• /
• v.36 no.4
• /
• pp.330-340
• /
• 2015

For this study, we developed an algorithm to estimate the total amount of clouds using sky image data from the Skyviewer equipped with CCD camera. Total cloud amount is estimated by removing mask areas of RGB (Red Green Blue) images, classifying images according to frequency distribution of GBR (Green Blue Ratio), and extracting cloud pixels from them by deciding RBR (Red Blue Ratio) threshold. Total cloud amount is also estimated by validity checks after removing sunlight area from those classified cloud pixels. In order to verify the accuracy of the algorithm that estimates total cloud amount, the research analyzed Bias, RMSE, and correlation coefficient compared to records of total cloud amount earned by human observation from the Gangwon Regional Meteorological Administration, which is in the closest vicinity of the observation site. The cases are selected four daily data from 0800 LST to 1700 LST for each season. The results of analysis showed that the Bias in total cloud amount estimated by the Skyviewer was an average of -0.8 tenth, and the RMSE was 1.6 tenths, indicating the difference in total cloud amount within 2 tenths. Also, correlation coefficient was very high, marking an average of over 0.91 in all cases, despite the distance between the two observation sites (about 4 km).

• Journal of Sensor Science and Technology
• /
• v.9 no.2
• /
• pp.96-105
• /
• 2000

Fiber optic TR-EFPI(total reflected extrtinsic Fabry-Perot interferometric) sensor was developed to measure the strain of structures, such as building, bridge, aircraft, etc. It has been difficult to distinguish the increase and decrease of the strain from the conventional fiber optic EFPI sensor because their signals only have a sinusoidal wave pattern related to the change of strain. Also, the absolute strain could not be measured by the simple fiber optic EFPI sensor. In this study, in order to measure the magnitude of strain with the direction of strain, the fiber optic sensor was simply constructed with the total reflected EFPI sensor probe. This probe was manufactured with a single mode fiber and a mirror coated fiber in a silica glass capillary tube. The output signal of this fiber optic TR-EFPT sensor can give the information about the magnitude and the direction of strain. The loading-unloading test was performed by the universal testing machine with alluminum beam specimen to compare the strain from fiber optic TR-EFPI sensor with the value from electrical strain gauge. In the result of this experiment. the strain from fiber optic TR-EFPI sensor had a good agreement with the values from the electrical strain gauge.