• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.39-45
• /
• 2004

A computer simulation about removal of the 0-th order diffraction is achieved by using numerical reconstruction in digital holography and the Fourier transform method. A light intensity distribution hologram is generated through numerical calculation of the interference pattern. Additionally a phase hologram without the 0-th order diffraction is generated. The removal function for elimination of the 0-the order diffraction is introduced and the numerical reconstructions with several conditions for the removal of the 0-th order diffraction and the production of high quality numerically reconstructed images are tested and compared. The removal function is proven to be more effective at the suppression of the 0-th order diffraction compared with the DC suppression method.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.233-244
• /
• 1996

The purpose of this study was to compare the shear bond strength obtained from ceramic and plastic brackets bonded with various light-cured adhesives and to evaluate their debonded failure sites. Plastic brackets, Transcend 6000, Signature and Starflre TMB brackets were bonded with Orthobond, Light Bond and Transbond on one hundred forty extracted human premolar teeth as manufacturer's descriptions. After thermocycling the brackets were debonded with an Instron universal testing machine and the debonded bracket base surfaces were inspected under stereoscope to evaluate the failure sites. Also the shear bond strength and failure patterns with different curing time and with two different source of light were compared. The results were as follows. 1. There were no statistically significant differences among the mean shear bond strength of Orthobond, Light Bond and Transbond in a same bracket group except Plastic bracket group(p<0.05). 2. The mean shear bond strength of each adhesive with different bracket groups showed statistically significant differences. Stafire TMB showed the highest shear bond strenght among the brackets in this study, but there was no statistically singnificant difference with Transcend 6000 while there was statistically significant difference with Signature.(p<0.05) 3. The various bonding failure patterns were occurred among different bracket groups but most of failure sites were bracket base -adhesive interfaces. 4. There were no statistically significant differences in shear bond strength between the groups with curing time of 10 second and 20 second, and between the groups with two different sources of light as long as sufficient light intensity(above $400mWcm^2$) were provided(p<0.05). According to the result, it should be considered in clinical use of ceramic bracket with light-cured adhesives that the shear strengths of ceramic brackets were influenced by the retention from of bracket base as well as the composition of bracket and there was no difference in the shear bond strenght among various light-cured adhesives used in this study.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.81-90
• /
• 2007

The purpose of this study was to assess the effect of light-tip distance on the shear bond strength of a visible light-cured glass ionomer cement(Fuji Ortho LC ; GC, Japan) cured with three different light curing units : a halogen light(Elipar Trilight ; 3M ESPE, Seefeld, Germany), a Light Emitting Diode (LED, Elipar Freelight2 ; 3M ESPE, Seefeld, Germany) and a plasma arc light (Flipo ; LOKKI, France). 1. When used at a distance of 0mm from the bracket, the three light curing units showed no statistically different shear bond strengths. At distance of 3 and 6mm, no significant differences were found between the halogen and plasma arc lights, but both had significantly higher shear bond strengths than the LED light. 2. The halogen light and plasma arc light showed that no significant differences in bond strength were found among the three distances. Using the LED light, a greater light-tip distance produced significantly lower shear bond strengths.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2001.11a
• /
• pp.176-177
• /
• 2001

분화용 베고니아 유묘기의 양분흡수 특성을 구명하기 위하여 광강도와 배양액 농도 처리하에 실험을 진행하였다. 엽면적은 광에 의한 차이는 크게 나타나지 않았고 양액의 농도는 EC가 1.0 dSㆍm$^{-1}$처와 1.5 dSㆍm$^{-1}$에서 0.5 dSㆍm$^{-1}$보다 높게 나타났다. 초장은 광강도가 가장 낮은 처리구에서 길었고 약 38%와 60% 차광율 처리사이에는 큰 차이가 없었다. 또한 배양액의 농도에 따라서는 EC가 1.5 dSㆍm$^{-1}$인 처리구에서 EC가 1.0 dSㆍm$^{-1}$과 0.5 dSㆍm$^{-1}$인 처리구보다 초장이 길었다. 엽의 생체중도 처리에 따라 유의적인 차이가 나타났다. 광강도가 가장 낮은 처리구에서 생체중이 가장 높았으나 엽의 건물중은 처리간 차이가 나타나지 않았다. 배양액의 농도처리에 있어서 EC가 1.0 dSㆍm$^{-1}$과 1.5 dSㆍm$^{-1}$인 처리구에서 EC가 0.5 dSㆍm$^{-1}$인 처리구보다 엽의 생체중이 높게 나타났다. 그러나 배양액의 농도는 엽의 건물중에 영향을 주지 않았다. 줄기의 생체중과 건물중은 처리간 차이가 크게 나타나지 않았다. 다량원소의 흡수율을 조사한 결과 주로 배양액의 농도가 증가함에 따라 양분의 흡수율이 증가한다는 것을 알 수 있었다. 또한 광강도의 차이에 따라서 양분의 흡수율이 영향을 받는다는 것을 알 수 있었다. 광강도가 매우 낮은 처리구에서 양액의 흡수는 적었지만 높은 양분흡수율을 보였고 이러한 특성은 각 이온의 종류에 따라 약간의 차이를 보였다.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.781-789
• /
• 1997

The purpose of this study was to evaluate the effects of fluoride relasing orthodontic sealant on the shear bond strength of light-and chemical-cured orthodontic rosins, to compare the shear bond strenth with light-and chemical-cured orthodontic resins, and to identify the changes of shear bond strength by rebonding in vitro. The brackets were divided into eight groups. Each group of metal brackets had different bonding mechanisms with adhesives. Group A : Transbond only Group B : Mono-Lok 2 only Group C : Light cured FluoroBond+Transbond Group D : Light cured FluoroBond+Mono-Lok 2 Group E : Transbond only(rebonded) Group F : Nomo-Lok 2 only(rebonded) Group G : Light cured FluoroBond+Transbond(rebonded) Group H : Light cured FluoroBond+Mono-Lok 2(rebonded) 65 extracted human premolars were prepared for bonding and 65 metal brackets for each group were bonded to prepared enamel surfaces of buccal surfaces as the above prescription. 24 hours bonding after, the Instron universal testing machine was used to test the shear bond strength of metal brackets to enamel. After debonding, same kind of metal brackets for each group were rebonded to prepared enamel surfaces of buccal surfaces to test the shear bond strength at the rebonding to enamel. Statistical analysis of the data was carried out Student's t-test ANOVA test, and Scheffe test using $SPSS/PC^+$ The results were as follows : 1. The order of shear bond strength was Group B(11.84MPa), Group A(10.75MPa), Group, D(9.69MPa), and Group C(9.39MPa)in lst bonded groups. 2. The order of shear bond strength was Group E(7.40MPa), Group G(6.48MPa), Group F(5.89MPa), and Group H(5.15MPa) in rebonded groups. 3. The shear bond strength of chemical cured orthodontic rosins had higher than that of light-cured orthodontic resins in all groups, but there was no statistical significance between groups(P>0.05). 4. In rebonded groups, the shear bond strength of light cured orthodontic rosins had higher than that of chemical cured orthodontic resins, but there was no statistical significance between groups(P>0.05). 5. The shear bond strength of all rebonded groups progressively decreased than that of 1st bonded groups, and there was statistical significance between groups(p<0.05, p<0.001).

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.171-174
• /
• 1999

Methyl acetate의 초음파 흡수측정을 0.2-10MHz의 주파수 범위, 은도 5-30에 걸쳐 광회절 초음파 공명법을 사용하여 행하였다. 그 결과, cis와 trans에 의한 완화는 단일 완화현상을 보였고 그 스책트럼으로 부터 완화 주파수와 완화강도를 결정하였다. 완화 주파수의 온도 의존성으로부터 활성화 에너지(${\Delta}H^{#}$)=6.6 kcal/mol을, 완화강도의 온도 의존성에서 엔탈피차(${\Delta}H$)=3.4 kcal/mol을 각각 구하였다.

• The korean journal of orthodontics
• /
• v.36 no.3 s.116
• /
• pp.198-206
• /
• 2006

With the introduction of the xenon plasma arc curing light and the LED curing light as orthodontic curing lights, the polymerizing time of orthodontic composites has clearly decreased. In contrast to various research cases regarding the polymerization time and bond strength of the xenon plasma arc curing light, not enough research exists on the LED curing light, including the appropriate polymerization time. The objective of this research was to compare the bond strength of the plasma curing light and the LED curing light in regards to the polymerization time. The polymerization time needed to achieve an appropriate adhesion strength of the bracket has also been studied. After applying orthodontic brackets using composite resin onto 120 human premolars, the plasma arc curing light and the LED curing light were used for polymerization for 4, 6, and 8 seconds accordingly. This research proved that the LED curing light provided appropriate bond strength for mounting orthodontic brackets even with short seconds of polymerization. The expensive cost and large size of the device limits the use of the plasma arc curing light, whereas the low cost and easy handling of the LED curing light may lead to greater use in orthodontics.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.2
• /
• pp.82-87
• /
• 2002

This study was conducted to investigate the influence of shading treatment on the photosynthetic rate, transpiration rate, stomatal conductance and its any correlations in Liriope platyphylla $W_{ANG}\;et\;T_{ANG}$. Followings were achieved as a conclusion. The net photosynthetic rate was increased as the PAR was increased and reached maximum at the $700-1000{\mu}mol/m^2/s$ of PAR in all of leaves, also this treatment caused a higher net photosynthetic rate in comparison with control. It shows the tendency of increasing stomatal conductance caused by the increment of PAR. The diurnal changes of photosynthesis, transpiration rate and stomatal conductance were increased as the PAR was increased in the morning, but they indicated a decreased tendency in broad day. The relationship between net photosynthetic rate and stomatal conductance is well fit by the first regression linear equation. However, the values obtained from the linear equation have the different, respectively, and have highly significance. From the above results, net photosynthetic rate of shading treatment is higher than control in the same stomatal conductance. Different first regression linear equation were obtained between the transpiration rate and stomatal conductance, photosynthesis and stomatal conductance in during the control and shading treatment, too.

• Restorative Dentistry and Endodontics
• /
• v.35 no.5
• /
• pp.368-373
• /
• 2010

Objectives: This study investigated the effect of infection control barrier thickness on power density, wavelength, and light diffusion of light curing units. Materials and Methods: Infection control barrier (Cleanwrap) in one-fold, two-fold, four-fold, and eightfold, and a halogen light curing unit (Optilux 360) and a light emitting diode (LED) light curing unit (Elipar FreeLight 2) were used in this study. Power density of light curing units with infection control barriers covering the fiberoptic bundle was measured with a hand held dental radiometer (Cure Rite). Wavelength of light curing units fixed on a custom made optical breadboard was measured with a portable spectroradiometer (CS-1000). Light diffusion of light curing units was photographed with DSLR (Nikon D70s) as above. Results: Power density decreased significantly as the layer thickness of the infection control barrier increased, except the one-fold and two-fold in halogen light curing unit. Especially, when the barrier was four-fold and more in the halogen light curing unit, the decrease of power density was more prominent. The wavelength of light curing units was not affected by the barriers and almost no change was detected in the peak wavelength. Light diffusion of LED light curing unit was not affected by barriers, however, halogen light curing unit showed decrease in light diffusion angle when the barrier was four-fold and statistically different decrease when the barrier was eight-fold (p < 0.05). Conclusions: It could be assumed that the infection control barriers should be used as two-fold rather than one-fold to prevent tearing of the barriers and subsequent cross contamination between the patients.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.49-56
• /
• 1998

Super precision working technique and machine tool have been continually developed thanks to advanced electronic field. To obtain good result. it is necessary to investigate surface in grinding with $mu extrm{m}$ level. There were quite many researches to satisfy these demands by using non-contact methods through the computer vision. In this study, the texture of working surface was analyzed. co-occurrence matrices was obtained from the surface roughness. Texture parameter was obtained using position operator composed of $ heta$, d according to variation of angle direction and distance. As a result, it was found that surface texture was more affected by direction($\theta$) than distance(d).