• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.482-490
• /
• 2006

Deep caries in primary molars without early intervention frequently induce a pulpal disease and consequent abscess lesion in surrounding tissue. Especially in many furcation radiolucent lesions of primary molars, accessory canals in furcation areas of primary molars play an important role in theses pathological progress. Although the studies of these communication canals in furcation area of human permanent molar well documented, there has been little research showing their existence in primary molar. For the purpose of understanding the morphological characteristics of accessory canals at furcation areas of primary molars and examining its frequency and patency, 52 specimen teeth were observed under the scanning electro-microscope and tested with dye penetration under vacuum pressure, and obtained the results as follows : 1. In SEM study, the frequency of accessory foramina viewed from the external and internal furcation area was 60% and 35% respectively. Likewise the diameter of the accessory canals was within the range of $11{\sim}107{\mu}m$ and $12{\sim}62{\mu}m$ respectively. 2. The frequency of patent accessory canals evidenced by the dye penetrated under the vacuum suction at furca areas in primary molars was 50% among the 20 specimen teeth tested.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.301-307
• /
• 2012

The characteristics of pressure loss in an asymmetric bifurcating tube were investigated numerically for steady inspiratory conditions. The loss coefficient K calculated for various asymmetry and flow-distribution ratios found in human lung airways showed a power-law dependence on the Reynolds number (Re) and length-to-diameter ratio (L/d), with different exponents for Re $\geq$ 100 and Re < 100. The fundamental characteristics of the asymmetric bifurcation are similar to the case of symmetric bifurcation. In addition, the effect of skewed inlet velocity profiles on the pressure loss was weak, and decreased with an increasing number of bifurcations.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.4
• /
• pp.357-362
• /
• 1981

This study was conducted to examine the best population density and agronomic characteristics affected by different row-widths and planting-spaces within row in safflower. As both row-width and spacing were narrowed, plant height and height to first branch were increased, and the number of branch per plant showed decrease. Plant height showed negative correlation with row-width, height to first branch showed negative correlation with row-width x spacing, and number of branch per plant had positive correlation with row width, and row-width x spacing but negative correlation with plant height. Yield was affected by spacing and row-width x spacing. In spacing, 5cm plot performed the best yield, and 30 x 5cm population density was the best cultural method to increase safflower yield. Yield had negative correlation with spacing and row-width x spacing, but positive correlation with height to first branch.

• Journal of Veterinary Clinics
• /
• v.27 no.5
• /
• pp.573-578
• /
• 2010

A 4-year-old intact male Shih Tzu dog (weighing 5 kg), was presented with signs of severe dyspnea, exercise intolerance and cyanosis. Diagnostic studies suggested a reverse patent ductus arteriosus (rPDA) with pneumonia. Despite emergency treatments with oxygen, diuretics, antibiotics and medical therapy for hyperkalemia, the dog died of ventricular fibrillation from hyperkalemia and dehydration. Necropsy revealed the rPDA with a marked descending aortic dilation and abnormally arisen left common carotid artery.

• Asian Journal of Turfgrass Science
• /
• v.7 no.2_3
• /
• pp.95-101
• /
• 1993

1992년 6월부터 1993년 9월 동안에 서울에서 이루어진 바랭이와 잔디의 분지형(branching pattern)과 유효엽면적(effective leaf area)에 대한 정량적 연구 결과는 다음과 같다. 1. 분지 끝 지점의 2차원적인 위치는 수학적 방식을 이용한 이론적 모델에 의해 분지사이의 각과 분지 길이들이 상대적인 비를 이용하여 계산할 수 있다. 2. 분지각과 분지길이의 상대적인 비는 바랭이나 잔디의 개체와 군락의 전체적인 구조를 효과적으로 분석하는데 있어 매우 적절하게 사용될 수 있다. 3. 시간에 따라 변화되는 분지형을 명확히 분석하기 위해 positive feedback theory를 성장 분석 모델로 적용하였다. 4. 분지의 마디 배열은 봄에서 여름에 이르는 생장 기간동안에 변화됨을 나타내었다. 주지(mother branch)와 복지(daughter branch)사이의 각은 적정치에 수렴하는 양상을 보였으며 그 평균값은 바랭이가 50도, 잔디가 59도임을 알 수 있었다. 5. 야외에서 관찰된 실험적 측정치아 모식적 구성을 통해서 최대 물질 생산과 연관된 햇빛 흡수와 수용의 극대화를 위한 분지형과 최대 유효엽면적의 상관 관계를 분석하였다. 6. 따라서 수학적 모식을 이용한 분지형 분석은 실험적 측정치와 잘 일치하며, 이런 수관형의 형성은 유전적 요소와 환경적 요소에 의해 영향을 받을 뿐만 아니라 식물의 적응적 중요성을 지니는 유효잎면적, 관수용 및 광합성과 물질생산의 극대화를 분석하는데도 유효하게 쓰일 수 있다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.229-235
• /
• 2013

To investigate the effect of the flexible artery wall on the blood flow, three-dimensional numerical simulations were carried out for analyzing the time-dependent incompressible flows of Newtonian fluids constrained by a flexible wall. The Navier-Stokes equations for fluid flow were solved using the P2P1 Galerkin finite element method, and mesh movement was achieved using an arbitrary Lagrangian-Eulerian formulation. The Newmark method was employed for solving the dynamic equilibrium equations for the deformation of a linear elastic solid. To avoid complexity due to the necessity of additional mechanical constraints, we used a combined formulation that includes both the fluid and structure equations of motion to produce a single coupled variational equation. The results showed that the flexibility of the carotid wall significantly affects flow phenomena during the pulse cycle. The flow field was also found to be strongly influenced by the bifurcation angle.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.385-388
• /
• 2008

The objective of this paper is simulating blood flow through the branched and stenotic tube numerically. SC-Tetra, which is one of the commercial code using FVM method, was utilized for this analysis. The flow is assumed as an incompressible laminar flow with the additional condition of non-Newtonian fluid. As the constitutive equation for the fluid viscosity, the following models were solved with governing equations ; Cross Model, Modified Cross Model, Carreau Model and Carreau-Yasuda Model. Final goal was achieved to get analytic data about shear stress, at specific points, changing the geometry with various factors like the bifurcation angle, diameter of the branches, the ratio of stenosis, and etc. The material property of blood was referred from the related papers. Furthermore, to verify results they were compared with those of the published papers. There were some discrepancies based on the different solver and the different data post-processing method. However, many parameters like the location of low shear stress, which arised from bifurcation or stenosis, and the tendency of various factors were found to be very similar.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.1
• /
• pp.25-33
• /
• 1998

An experimental study has been carried out to obtain optimal conditions for turbulent mixing of two fluid streams at various angle branches by a flow visualization method. The main purpose of this study is the utilization of flow visualization method as a fast and efficient way to find the optimal mixing conditions when several flow control parameters are superimposed. It is verified that the optimal conditions estimated by flow visualization method have good agreement with the concentration field measurements. The results demonstrate that the diameter ratio is mainly attributed to the mixing phenomena than the branch pipe angle and the Reynolds number. The most striking fact is that there exists the best diameter ratio, d/D.ident. O.17, which requires the minimum momentum ratio in the range of the present experiment. The velocity ratio for the optimal mixing condition has a value within 2 to 16 according to the different flow parameters.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.1
• /
• pp.31-37
• /
• 2006

The present study has been experimentally investigated the effect of geometric and operating parameters on the two-phase flow distribution of refrigerants in a horizontal T-junction. The operating parameters were the kind of refrigerants (R-22, R- l34a, and R-410A), saturated temperature, and the inlet mass flux and quality. The geometric parameters were the tube diameter and the tube diameter ratio. The measured data of refrigerants were compared with the values predicted using the models developed by several researchers for air/water or steani/water two-phase flow. Among the operating parameters, the inlet Quality was the most sensitive to the mass flow rate ratio. Between the geometric parameters, the tube diameter ratio was more sensitive than tube diameter.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.165-168
• /
• 2002

This paper describes the dynamics of the weak shock wave propagating inside some kinds of branched pipe bends. Computations are carried out by solving the two-dimensional, compressible, unsteady Euler Equations. The second-order TVD(Total Variation Diminishing) scheme is employed to discretize the governing equations. For computations, two types of branched pipe($90^{\circ}$ branch,$45^{\circ}$ branch) with a diameter of D are used. The incident normal shock wave is assumed at D upstream of the pipe bend entrance, and its Mach number is changed between 1.1 and 2.4. The flow fields are numerically visualized by using the pressure contours and computed schlieren images. The comparison with the experimental data performed for the purpose of validation of computational work. Reflection and diffraction of the propagating shock wave are clarified. The present computations predicted the experimented flow field with a good accuracy.