• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.921-927
• /
• 1989

One of the most important problems in recent life prediction is to introduce the degradation effects into life prediction procedure. In the present paper, the effect of the material degradation on the fatigue surface crack growth and fatigue life prediction in a 2 1/4 Cr-1Mo steel were investigated. The 2 1/4 Cr-1Mo steel has been used in a plant having operated for over 60000hours and subjected to material degradation due to temper-embitterment. A Monte-Carlo simulation was made on the basis of the data obtained in the experiment in order to determine the P-S-N diagrams of surface crack growth for the degraded and recovered steels.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.2
• /
• pp.85-91
• /
• 2021

This paper introduces a modified Karagozian & Case concrete model (K&C model) for the numerical analysis of a steel-fiber-reinforced concrete (SFRC) structure subjected to projectile impact. The original K&C model was calibrated to consider the effects of steel fibers accurately by modifying the strength surfaces and input parameters. Single element tests were then conducted and compared with uniaxial and triaxial compressive data to verify the modified model. With the application of a dynamic increase factor, the finite element model of the SFRC structure subjected to projectile impact was constructed. Thereafter, the applicability of the modified material model was examined by comparisons with the experimental results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.252-261
• /
• 1991

A particle trajectory model to simulate two-phase particle-laden crossjets into two-dimensional horizontal free stream has been developed to study the variations of the jet trajectories and velocity variations of the gaseous and the particulate phases. The following conclusions may be drawn from the predicted results, which are in agreement with experimental observations. The penetration of the two-phase jet in a crossflow is greater than that of the single-phase jet. The penetration of particles into the free stream increases with increasing particle size, solids-gas loading ratio and carrier gas to free stream velocity ratio at the jet exit. When the particle size is large, the solid particles separate from the carrier gas , while the particles are completely suspended in the carrier gas for the case of small size particles. As the particle to carrier gas velocity ratio at the jet exit is less than unity, the particles in the vicinity of the jet exit are accelerated by the carrier gas. As the injection angle is increased, the difference of the particle trajectory from that of the pure gas becomes larger. Therefore, it can be concluded that the velocities and trajectories of the particle-laden jets in a crossflow change depending on the solids-gas loading ratio, particle size, carrier gas to free stream velocity ratio and particle to gas velocity ratio at the jet exit.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.9
• /
• pp.1661-1668
• /
• 2001

본고는 지뢰 방호복을 개발, 국산화하기 위해 먼저 방탄소재 구성방법에 관하여 실험한 결과이다. 기존의 여러 겹의 파라-아라미드(Para-aramid)나 단순히 파라-아라미드와 폴리 에틸렌 필름(Polyethlene film)을 조합한 소재구성과는 달리 케블라 파이버(Kevlar fiber)로 만들어진 펠트(felt)를 첨가하여 방탄원리 및 특성을 고려한 구성으로 방호복의 중량을 줄이면서 착용자로 하여금 유연성과 동작성을 향상시켜 임무수행과 안전성을 높일 수 있는 방호복을 개발하고자 하였다. 1) Para-aramid(내 충격열) + Flex-felt(충격 에너지 흡수) + Para-aramid(backface Polyethylene film(에너지 분산 극대)+Para-aramid(내 마찰열, backface순으로 소재를 배열함으로써 기존의 Para-aramed 36겹에 대하여 Para-aramid13겹, Polyethylene film 13겹, 그리고 펠트 1겹으로 동일한 방호성능을 얻었다. 2) 새로운 소재 구성 방법 에 의 한 방탄소재는 동일한 방호성능을 갖는 기존의 소재 구성 방법 에 따른 방탄소재 보다 중량에서 34-l9% ,더 가벼운 것으로 나타나 방호복 구성시 유연성이나 동작성에 유리 할 것으로 사료된다. 3) NIJ-STD-0101.03에서 의 Armor type II에 해당하는 시편 I의 방호한계속도로 구한 운동 에너지량은 154.4J Armor type III-A에 해 당하는 시편II의 방호한계속도로 구한 운동 에너지 량은 183.0J로 나타나 두 시편 모두 5m의 거리에서 M16Al지뢰의 0.032~0.044g사이 의 파편에 대해서 50%의 관통확률을 갖는 것으로 나타났다.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.273-278
• /
• 1997

In order to investigate the punch properties of some vegetables-cucumber, radish, garlic, ginger and potato-force, distance, and time were measured with a texturometer, and the correlations between compositions and cell characteristics of samples were characterized. Many reflection and rupture points on the force-distance and distance-time curve were observed, and these points appeared when the cells of sample were resisted and yielded against the applied force. They were big and clear at the slow crosshead speed. The regression analysis for force-time and distance-time to the rupture point showed $R^{2}>0.95$. The rupture time and rupure force were 5.63 sec, 4.88 N in ginger and 4.15 sec, 2.00 N in cucumber. The rupture forces become large values at the fast crosshead speed. As cell sizes were increased, the moisture content and rupture distance were increased, while the viscosity of juice, density, regularity of cell, and slope of force-time were decreased. Rupture force, time and distance were decreased at the large specific gravity of samples. The slopes of distance-time curve were inversely proportional to slope of force-time curve.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.42-52
• /
• 1997

The basic principle of underwater ram-jet as a unique marine propulsion concept showing vary high cruise speed range(e. g. 80-100 knots) is the thrust production by the transfer of the potential energy of compressed gas to the operating liquid through kinetic mixing process. This paper is aimed to investigate the propulsive efficiency of the nozzle flow in underwater ram-jet at the speed of 80 knots for the buried type vessel. The basic assumption of the theoretical analysis is that mixture of water and air can be treated as incompressible gas. For an optimized nozzle configuration obtained from the performance analysis, preliminary data for performance evaluation are obtained and effects of nozzle inner wall friction, ambient temperature, ambient pressure, water density, gas velocity, bubble radius, flow velocity, diffuser area ratio, mass flow ratio and water velocity gradient are investigated.

• (The) Research of the performance art and culture
• /
• no.34
• /
• pp.9-42
• /
• 2017

Of all Geommu(劍舞, Korean sword dance), Gisaeng-Geommu danced by gisaeng(妓生, Korean female entertainers) for private guests and at the royal court. The Sword dance in the late Joseon Dynasty used to be dynamic exuding menacing "sword spirit(劍氣)." Sword dance being transmitted today is more ritualistic and elegant. This study considers Korean sword dance has a core structure and motifs transcending generational differences, and based on this critical thinking, aims to analyze the structure of Korean sword dance. This study analyzed the prose "Geommugi(劍舞記)" by Park Je-ga(朴齊家) and the poem "Mugeompyeonjeongmiin(舞劍篇贈美人)" by Jeong Yak-yong(丁若鏞) out of literary works from the late Joseon Dynasty, and from official records of rituals(笏記), "Geomgimu(Sword Dance, 劍器舞)" and "Geommu" in "Gyobanggayo(敎坊歌謠)." In the introduction part of Sword dance, a dancer appears, bows and performs a hand dance or hansam(汗衫) dance to and fro. In the development part, a dancer meets with a sword but first hesitates to hold it and dances holding swords in both hands. The climax shows expert sword skills and combat scenes. In the conclusion part, the court dance involves a dancer bidding a formal farewell, while the dance for entertainment, a dance throws away the sword to finish. From literature materials, the structure of Korean sword dance could be divided into an introduction, a development, a climax and a conclusion. Based on this, this study analyzed sword dance movements by linking the beats accompanying the current sword dance, in the order of a Yeombul, the traditional Korean ballad Taryeong or Neujeun Taryeong, Jajin Taryeong, Taryeong and Jajin Taryeong. The introduction part includes a Buddhist prayer and the beginning of Taryeong. Dancers appear, and in two rows they dance facing each other. On the slow beat, their dances are relaxed and elegant. The development part is matched with Jajin Taryeong. Dancers sit in front of swords and grab them, and they dance holding a pair of swords. The beat gradually becomes faster, progressing the development of the dance. But then, the slower Taryeong is placed again. The reason behind it is to create a tension for a little while, before effectively reaching a climax by speeding up the tempo again. Moving on to Jajin Taryeong, dancers' movements are bigger and more dynamic. The highly elated Jajin Taryeong shows dance movements at the climax on fast, robust beats. In the conclusion part, the beat is quick-tempo and on the upbeat again on Jajin Taryeong. Driving on without a stop on the exciting Yeonpungdae(燕風臺) melody, dancers standing in a line dance wielding the swords and bow before finishing.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.531-540
• /
• 2009

In this study, thermo-gravimetric analysis(TGA) was used to investigate the effect of urea concentration and heating rate on the ammonia($NH_3$) formation process from urea solution. A newly designed pipe nozzle was inserted through a 1,000 N${\ss}$(C)/h oil firing boiler to compare the DeNOx efficiencies between the upward and downward nozzle. This experiment reveals the effect of path which an urea droplet goes through. Urea solution showed the same TGA graph without regard to the presence of oxygen. Heating rate had a great influence on the weight loss trend. But the concentration of urea solution between 10% and 40% did not affect so much the thermal decomposition temperature. Therefore, heating rate is more important factor on the thermal decomposition of urea than the concentration of urea solution. Three nozzles located at different positions showed similar DeNOx efficiencies such as 68.1%, 71.8%, 70.8% at the same temperature. Even though urea solution was injected for the same zone, the injection direction made much difference in DeNOx efficiency. A upward nozzle showed 68.1% and downward nozzle 9.5%. This results illustrate the importance of heating rate.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.366-371
• /
• 2021

This study suggests surface wave communication, which uses a metal surface as a medium, to provide wireless communication in the extreme environment due to surrounding metal materials on vessels. The test was conducted on a G/T 265 tons tug boat to confirm the possibility of surface wave communication between a bridge and each designated space in the ship. As a result, the transmission speed was 13Mbps on average. In a test case of the bridge via the engine room, the transmission speed was 4.3Mbps on engine running and 1.2Mbps on sailing. It overcame this by partially changing the equipment installation location. Surface wave communication in bow storage, a fully enclosed space, had 8Mbps better transmission speed than wireless communication; this confirmed the superiority of surface wave communication in confined spaces on a vessel. Additional surface wave generators were designed and applied to resolve the paint issue. It is expected to use surface wave communication to implement the new wireless solution for Maritime-IoT system on vessels.

• Journal of Conservation Science
• /
• v.24
• /
• pp.1-11
• /
• 2008

The Unhyungung Water Container in the possession of the Seoul Museum of History in Korea is consisted of a calcareous marble developed laminated bedding and numerous argillaceous veinlets. This monument should need to conservation treatment because of black discoloration and seriously numerous cracks. Vertical and horizontal cracks in the monument are developed following stratification and argillaceous veinlets that are relatively low coherence between the rock materials. We have proved that the material inducing discoloration on the surface is carbon which is formed by deposited organic matters. As the result of the ultrasonic measurements, although highly surface weathering degree, the physical properties of the Unhyungung Water Container is confirmed slightly weathered state. The depths of cracks in the monument are calculated at maximum 60mm in some cracks completely penetrating into the wall and at minimum 9mm in the other crack. The cracks, developed following veinlet, are revealed that there penetrate from an outer wall to an inside wall for the monument. And most depths of cracks, developed following stratification, are calculated 20 to 30mm. This result will offer a significant data for conservation of the Unhyungung Water Container.