• Journal of Bio-Environment Control
• /
• v.13 no.3
• /
• pp.143-148
• /
• 2004

The automatic operating system was designed and built to work manless multipurpose in greenhouse. The system proved to be a reliable system for performing multipurpose functions. Its development involved the integration of moving part, height control part, watering part, ventilation part and inhalation part. The moving part was able to be moved it on the rail installed in greenhouse, the height control part controled it up and down by height of the crops, the watering part sprinkled a agricultural medicines on the crops and the ventilation and the inhalation part ventilated and inhaled different thing and vermin which were attached on crops. Based on the results of this study the following conclusions were made: The moving velocity was changed 0.047 - 0.027 m/s by the dial transfer. The velocity within 50 cm from center of the entrance was 0.2 m/s. The watering volume of spray increased as the pressure of spray was high. The difference of spray pressure between 10 kg/$\textrm{cm}^2$ and 15 kg/$\textrm{cm}^2$ was 60 ml, but that of spray pressure between 15 kg/$\textrm{cm}^2$ and 20 kg/$\textrm{cm}^2$ was 20 ml. The average speed of a current of inhalation was 3.64 m/s and the inhalation flux of inhalation was measured 0.044 ㎥/s by using glues seed and styrofoam.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.551-561
• /
• 2007

This case study is about the sampling and interpretation of soil pore water in order to understand and to predict the diffusion and behavior of soil pollution. For the measurement of polycyclic aromatic hydrocarbons(PAHs) in two representative hydrocarbon-contaminated sites, the extraction system of the soil pore water was set up with respect to soil depths and the behavior of contaminants was interpreted. The soil solution extraction system consisted of peristaltic pump, and extraction and sampling compartment, and can measure simultaneously the soil water pressure. The concentration of PAHs with respect to extraction pressure and time decreased due to dilution through soil pore water. Particularly, the concentration of PAHs was more reduced under the unsaturated oxic condition than saturated anoxic condition. Therefore, the soil solution extraction with respect to soil water pressure can interpret the extent of equilibrium between porewater and soil surface.

• Journal of Bio-Environment Control
• /
• v.7 no.4
• /
• pp.311-323
• /
• 1998

This study was conducted to analyze the temperature characteristics under tunnel type greenhouse to cultivate watermelon in Sungju region. Air temperature of tunnel type greenhouse was descending rapidly after sunset, and the time required the air temperature inside greenhouse nearly reached the outside air temperature was about 2.5 hours. The maximum air temperature in tunnel type greenhouse, in case of high air temperature day, was exceeding 4$0^{\circ}C$ during day time. Air temperature inside greenhouse during night time could sustain about 2~3$^{\circ}C$ higher than the outside air temperature. But it was necessary to supply supplemental heat when the air temperature was below optimum growth temperature. Soil temperature in the depth of 20cm under soil surface could maintain higher than 2$0^{\circ}C$ and the variation range in a day was 3~5$^{\circ}C$, and the soil temperature descending due to irrigation was about 5~6$^{\circ}C$.

• Horticultural Science & Technology
• /
• v.30 no.2
• /
• pp.129-136
• /
• 2012

This study was conducted to develop an efficient mass propagation method for the mature $Prunus$ $yedoensis$ Matsumura (43 to 58 years old). Cutting was conducted depending on cutting time, auxin treatments (IBA and NAA treatments mixed with talc powder), and cuttings position on shoots in a plastic house equipped with a fog system without heating. Rooted cuttings were transplanted to a nursery bed, and their growth characteristics were investigated in order to check whether the cuttings are successful or not for roadside tree planting. The average rooting rate was highly significant ($P$ < 0.0001) in all treatments: cutting on June 1st (61.4%) was more than two times greater in rooting rate than that on August 1st (23.6%); IBA 1,000 $mg{\cdot}L^{-1}$ (90.8%) and IBA 500 $mg{\cdot}L^{-1}$ (89.2%) showed much greater rooting rates than those of the other treatments; upper part of the cuttings treated with IBA 1,000 $mg{\cdot}L^{-1}$ showed the highest rooting rate, 96.7%. The interactions among treatments in the average rooting rate were also significant. There were significant differences ($P$ < 0.0001) among the auxin treatments in the survival rate of leafed cuttings transplanted to a nursery bed. The average survival rate was 46.5%, and IBA 1,000 $mg{\cdot}L^{-1}$ treatment was the highest in leafed cuttings 79.2%, but most of leafless cuttings were dead. There were significant differences ($P$ < 0.0001) among the cuttings, grafts, and in the seedlings height, diameter at root collar, the number of roots, branches, and leaves, etc., and the cuttings was the best. We can expect a possibility of mass propagation of improved $P.$ $yedoensis$ Matsumura and a high planting survival rate through the transplanting of cuttings to a nursery bed in which the cuttings should be the following conditions: cutting in June to July, use of the upper part of cuttings, IBA treatment, and rooting in August in a cutting-greenhouse equipped with a fog system.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.163-169
• /
• 2012

We have conducted three experiments to develop a fertilizer-dissolving apparatus used in fertigation or hydroponics cultivation in order to decrease the fertilizer dissolving time and labor input via automation. All of the experiments were conducted twice. In the first experiment, four selected treatments were tested to dissolve fertilizers rapidly. The first treatment was to dissolve fertilizer by spraying water with a submerged water pump, placed in the nutrient solution tank. The water was sprayed onto fertilizer, which is dissolved and filtered through the hemp cloth mounted on the upper part of the nutrient solution tank (Spray). The second treatment was to install a propeller on the bottom of the nutrient solution tank (Propeller). The third treatment was to produce a water stream with a submerged water pump, located at the bottom of the tank (Submerged). Finally, the fourth treatment was to produce an air stream through air pipes with an air compressor located at the bottom of the tank (Airflow). The Spray treatment was found to take the shortest time to dissolve fertilizer, yet it was inconvenient to implement and manage after installation. The Airflow treatment was thought to be the best method in terms of the time to dissolve, labor input, and automation. In the second experiment, Airflow treatment was investigated in more detail. In order to determine the optimal number of air pipe arms and their specification, different versions of 6- and 8-arm air pipe systems were evaluated. The apparatus with 6 arms (Arm-6) that was made of light density polyethylene was determined to be the best system, evaluated on its time to dissolve fertilizer, easiness to use regardless of the lid size of the tank, and easiness to produce and install. In the third experiment, the Submerged and Arm-6 treatments were compared for their dissolving time and economics. Arm-6 treatment decreased the dissolving time by 8 times and proved to be very economic. In addition, dissolving characteristics were investigated for $KNO_3$, $Ca(NO_3)_2{\cdot}4H_2O$, and Fe-EDTA.

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.159-167
• /
• 1997

To cope with the mass-production and supply of plug seedling, the supply of transplanters is necessary. In the study, a transplanting test was carried out to find the optimum working condition in the mechanizd transplantation and to acquire the basic data for the improvement of transplanters by the research and analysis of working capacity of the local manual transplanters. The size of hopper affected transplanting stand and rate. Re-irrigation was required for the transplanted seedlings because they wilt 1 day after the transplanting if soil compaction is incomplete. Consequently, back-forth-left-right compaction method was good for soil covering and compaction. It may be thought to increase the amount of irrigation water at the time of transplanting by double-irrigation mechanism, but it needs to increase the larger water tank which makes the operation uneasy. So, assuming the working model by 1 or 2 operators with the machine size as small as possible, it seemed that eliminating of automatic irrigation method was desirable in view of efficiency. Though semiautomatic transplanter needs some structural improvements, it seemed still suitable for transplanting of plug seedlings such as 45-day red pepper seedlings in 128-hole tray and 25-day Chinese cabbage seedling in 128-hole tray. If traveling speed of the transplanter is limited to less than 14 m/min, with the transplanting depth of 2~3cm and transplanting space of 30cm.

• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.517-524
• /
• 2003

There have been worldwide research and development efforts to automate various processes of bio-production and those efforts will be expanded with priority given to tasks which require high intensive labor or produce high value-added product and tasks under hostile environment. In the field of bio-production capabilities of the versatility and robustness of automated system have been major bottlenecks along with economical efficiency. This paper introduces a new concept of automation based on tole-operation, which can provide solutions to overcome inherent difficulties in automating bio-production processes. Operator(farmer), computer, and automatic machinery share their roles utilizing their maximum merits to accomplish given tasks successfully. Among processes of greenhouse watermelon cultivation tasks such as pruning, watering, pesticide application, and harvest with loading were chosen based on the required labor intensiveness and functional similarities to realize the proposed concept. The developed system was composed of 5 major hardware modules such as wireless remote monitoring and task control module, wireless remote image acquisition and data transmission module, gantry system equipped with 4 d.o.f. Cartesian type robotic manipulator, exchangeable modular type end-effectors, and guided watermelon loading and storage module. The system was operated through the graphic user interface using touch screen monitor and wireless data communication among operator, computer, and machine. The proposed system showed practical and feasible way of automation in the field of volatile bio-production process.

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.257-264
• /
• 1999

The trickling system for automatic and individual watering were made with Bunchungto, Ongito and Backjato. The thickness of ceramics were 1.0, 1.5, 2.0, 2.5 and 3.0mm. And they were fired in a muffle furnace at five different temperatures between 500 and 900'E during 12 hours. The upper plastic parts of sensor consisted of five elements made by steel mold. With the photo fiber sensor attached to datalogger, an accumulated amount of drops for every 10 minutes were recorded. The porosity is higher in the order of Bunchungto, Backjato and Ongito; also, as the firing temperature is higher and the thickness is thicker, the porosity is higher. The ceramic sensors consisted of $SiO_2$ of 54.17~71.62wt.%, A1$_2$ $O_3$ of 15.42~33.79wt.% and the rest of 10wt.%, those were Fe$_2$ $O_3$, CaO, MgO, Na$_2$O, $K_2$O, Ti $O_2$, P$_2$ $O_{5}$. The pattern of dropping were changed according to the variety, thickness and firing temperature of ceramics. As the ceramics were made thicker, the fluctuation of dropping became more rapid, but it did not regularly work at 1mm thickness. As the firing temperature of ceramics became higher, the fluctuation of dropped amount became more rapid.

• Korean Journal of Plant Resources
• /
• v.28 no.5
• /
• pp.665-674
• /
• 2015

The final goal of this research is to develop a botanical biofiltration system, which combines green interior, biofiltering, and automatic irrigation, which can purify indoor air pollutants according to indoor space and the size of biofilter. The biofilter used in this experiment was designed as an integral form of water metering pump, water tank, blower, humidifier, and multi-level planting space in order to be more suitable for indoor space utilization. This study was performed to compare indoor air quality between the space adjacent to a botanical biofilter and the space away from the biofilter (control) without generation of artificial indoor air pollutants, and to evaluate plant growth depending on multiple floors within the biofilter. Each concentration of indoor air pollutants such as TVOCs, monoxide, and dioxide in the space treated with the biofilter was lower than that of control. Dracaena sanderiana ‘Vitoria’ and Epipremnum aureum ‘N Joy’ also showed normal growth responses regardless of multiple floors within the biofilter. Hence, it was confirmed that the wall-typed botanical biofilter suitable for indoor plants was effective for indoor air purification.

• Korean Journal of Organic Agriculture
• /
• v.7 no.2
• /
• pp.115-124
• /
• 1999

This study was conducted to investigate the effects of fertigation level such as 50%, 75% and 100% N of standard amount of chemical fertilizer,m and fertigation interval such as every irrigation, intervals of 1 and 2 weeks of piggery waste water(PWW) on the growth, yield of red pepper plant and the chemical properties of soil used. In early stage, growth of red pepper plant fertigated with PWW and that of red pepper plant applicated standard chemical fertilezer was the same, while it were increased as increasing application amounts of PWW, and later growth and total yield of red pepper plant were much more at 75% N fertigation of PWW. Inorganic content such as nitrogen, phosphate and potassium and chlorophyll content of red pepper leaves were increased as increasing fergigation amount of PWW. 50% fertigation level showed the lowest rate of fruit setting of red peper plant. For soil chemical properties, pH was slightly decreased, but available $P_2O_5$, and exchangeable K content were increased as increasing fertigation amount of PWW. Because there was not statistically significant difference in the growth, the yield of red pepper and chemical properties of soil used according to various fertigation intervals, and no need to artificially supply PWW, therefore fertigation by simple automatic system with tensiometer was thought to be better.