• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.297-304
• /
• 2011

Ramen flour formulation was optimized by applying a mixture experimental design. In the optimization, the overall palatability (OP) of cooked ramen and the rheological properties of selected dough were maximized or minimized. Blended ratios of the ingredients such as Dark Northern Spring (DNS), Hard Red Winter (HRW), and Soft White (SW) were designed on a simplex-lattice. Dough rheological properties were measured by Rapid Visco Analyser (RVA), Farinograph, and Extensograph, and the overall palatability by sensory evaluation. Several principal dough rheological properties such as RVA peak viscosity (PV), Farinograph development time (DT), and Extensograph resistance/extensibility after 45 min (R/E 45 min) were selected to influence the overall palatability by canonical correlation analysis (CCA). Goals of the optimization were given as OP maximized, PV maximized, DT minimized, and R/E at 45 min maximized. The optimization results were found to be DNS 33.3%, HRW 33.3%, and SW 33.3% with OP, 5.825; PV, 587.9 cP; DT, 3.1 min; R/E at 45 min, 2.339 BU/mm.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2005.05a
• /
• pp.231-234
• /
• 2005

본 실험은 돈육 후지 부위를 이용하여 육포 제조시 텀블링 시간에 따른 육포의, 이화학적 및 관능적 특성을 조사하여 표준화된 육포제조의 기초 자료를 제공하고자 실시하였다. 텀블링 시간에 따른 건조전 육포 양념육의 제품수율은 30분까지는 수율이 유의적으로 증가하는 경향을 보였으나, 60분 동안 텀블링을 실시하였을 때는 30분보다 낮은 값을 나타내었다. 텀블링 시간에 따라 pH는 차이가 없었으나, 보수력은 텀블링 30분까지 유의적으로 증가하였고 이후 부터는 차이가 없었다. 육색은 텀블링 시간이 경과함에 따라 $L^{\ast}-$값과 $b^{\ast}-$값은 감소하는 경향을 보였으나 반대로 $a^{\ast}-$값은 텀블링 시간이 증가함에 따라 점점 증가하는 경향을 보였다. 건조후 제조된 돈육육포의 수분함량은 $29{\sim}30%$ 정도를 유지하였으며, 건조수율은 모두 $48{\sim}49%$ 정도의 높은 수율을 보였다. 육포의 $L^{\ast}-$값은 30분 및 60분 동안 텀블링을 실시하였을 때 10분 동안 텀블링을 실시한 육포보다 낮게 나타났다. 60분 동안 텀블링한 육포의 $a^{\ast}-$값은 10분간 텀블링한 것보다 높았으며, $b^{\ast}-$값은 $a^{\ast}-$값과는 반대의 경향을 나타내었다. 탄력성(springiness)은 60분 동안 텀블링한 육포가 10분 동안 텀블링한 육포보다 높은 값을 보였으나, 탄력성을 제외한 모든 항목에서 유의차가 나타나지 않았다. 관능검사는 모든 항목에서 30분 이상 텀블링한 육포가 좋은 평가를 받았으나, 처리구간에 유의차는 나타나지 않았다.pm을 spiking한 후 SPE상에서 SCX(Strong cation exchange column)을 통한 clean-up과정을 거친 후의 STP의 limit of quantification(LOQ)는 약 0.44ppm이었으며, 이에 대한 회수율은 89.7${\pm}$2.3%(n=6)를 나타냈다. 실제 CODEX에서 권장한 우유의 MRL이 0.6ppm인 점을 감안하면 CODEX권고치에 도달할 수 있는 것으로 판단되었다. 따라서 본 연구에서 개발 된 시험법은 지금까지 국내적으로 STP에 대한 시험법이 확립되어 있지 않은 것으로 이와 아울러 간편한 parallux와 병용해 STP에 대한 정량 및 정성 분석을 유도체화 장치 및 형광검출기를 이용해 잔류항생물질 STP에 대한 분석시험법을 개발하였다.화와 네트워크 조직망 구축을 위한 지역중심의 복합 생활문화 공간이 필요할 것이며, 이를 촉진키 위한 mentor academy시스템 접근을 통해 점점 고령화되어 가고 있는 재래시장에 대해 차별적 특성이 반영된 종합적이고 체계적 접근 방법연구가 필요하다./TEX> 자체기술개발, 선진기술 도입, 산업간 및 산업내 기술확산, 국제기술협력 ${\rightarrow}$ 기술혁신의 촉진 ${\rightarrow}$ 총요소생산성과 기업경쟁력(자원 및 역량, 프로세스 경쟁력, 품질경쟁력, 시장경쟁력, 고객성과, 시장성과, 재무성과)의 제고 ${\rightarrow}$ 가격경쟁력(임금, 금리, 물류비용, 환율 등)과 비(非)가격경쟁력(디자인, 에프터서비스, 품질, 운송 등)의 제고 ${\rightarrow}$ 국가경쟁력의 제고 ${\rightarrow}$ 국제수지 흑자 ${\ri

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.167-172
• /
• 2011

In this work, the effect of surface treatment on mesoporous carbons (MCs) supports was investigated by analyzing surface functional groups. MCs were prepared by a conventional templating method using mesoporous silica (SBA-15) for using catalyst supports in direct methanol fuel cells (DMFCs). The MCs were treated with different phosphoric acid ($H_3PO_4$) concentrations i.e., 0, 1, 3, 4, and 5 M at 343 K for 6 h. And then Pt-Ru was deposited onto surface treated MCs (H-MCs) by chemical reduction method. The characteristics of Pt-Ru catalysts deposited onto H-MCs were determined by specific surface area and pore size analyzer, X-ray diffraction, X-ray photoelectron, transmission electron microscopy, and inductive coupled plasma-mass spectrometer. The electrochemical properties of Pt-Ru/H-MCs catalysts were also analyzed by cyclic voltammetry experiments. From the results of surface analysis, an oxygen functional group was introduced to the surface of carbon supports. From the results, the H4M-MCs carbon supports surface treated with 4 M $H_3PO_4$ led to uniform dispersion of Pt-Ru onto H4M-MCs, resulting in enhancing the electro-catalytic activity of Pt-Ru catalysts.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.673-680
• /
• 2009

This study was conducted to screen for plant food materials that improve human intestinal microflora, especially microorganisms associated with obesity. Among 30 tested plant food materials, the extract of Schizandra chinensis inactivated Eubacterium limosum, Bacteroides fragilis and Clostridium spp. Additionally, S. chinensis extract was also found to have a growth-promoting effect on Bifidobacterium spp.. The antimicrobial activity and antioxidant activity of the water extract did not decrease in respond to heating. Additionally, the water extract of S. chinensis did not show a toxic effect on the growth of Caco-2 cells. In vivo feeding tests were performed to investigate the influence of extract on the intestinal microflora in rats. Although the extract did not reduce obesity induced by a high fat diet, it led to significant increase in the population of Bifidobacterium spp. and a decrease in the population of Clostridium spp. in rats. Taken together, these results indicate that S. chinensis could be useful as a functional food component to control intestinal microbial flora.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.49-57
• /
• 2008

This study was conducted to develop an optimal composite recipe for a cookie including yam powder that would be attractive to all age groups. Wheat flour was partially substituted by yam powder to reduce the content of wheat flour. This study has produced the sensory optimal composite recipe by making cookies, respectively with each 5 level of yam powder $(X_1)$, Sugar$(X_2)$, butter$(X_3)$, by C.C.D (Central Composite Design) and conducting sensory evaluation and instrumental analysis by means of RSM (Response Surface Methodology). Sensory items showed very significant values in color, softness, overall quality (p<0.01), flavor (p<0.05) and those of instrumental analysis showed significant values in lightness, redness (p<0.05), spread ratio, hardness (p<0.01). Also sensory optimal ratio of yam cookie was calculated at yam powder 37.35 g, sugar 50.75 g, butter 78.40 g and it was revealed that the factors of influencing yam cookie aptitude were in older of yam powder, butter, sugar.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.11
• /
• pp.1386-1396
• /
• 2017

The purpose of this study was to determine the optimum Platycodon grandiflorum root concentrate (PGRC, $65^{\circ}Brix$), fermented P. grandiflorum root extract by Lactobacillus plantarum (FPGRE, $2^{\circ}Brix$), and cactus Chounnyouncho extract (Cactus-E, $2^{\circ}Brix$) for preparation of PGRC stick product with FPGRE using response surface methodology (RSM). The experimental conditions were designed according to a central composite design with 20 experimental points, including three replicates for three independent variables such as amount of PGRC (8~12 g), FPGRE (0~20 g), and Cactus-E (0~20 g). The experimental data for the sensory evaluation and functional properties based on antioxidant activity and antimicrobial activity were fitted with the quadratic model, and accuracy of equations was analyzed by ANOVA. For the responses, sensory and functional properties showed significant correlation with contents of three independent variables. The results indicate that addition of PGRC contributed to increased bitterness and acridity based on the sensory test and antimicrobial activity, addition of FPGRE contributed to increased antioxidant activity and antimicrobial activity, and addition of Cactus-E contributed to increased fluidity based on the sensory test, antioxidant activity, and antimicrobial activity. Based on the results of RSM, the optimum formulation of PGRC stick product was calculated as PGRC 8.456 g, FPGRE 20.00 g, and Cactus-Ex 20.00 g with minimal bitterness and acridity, as well as optimized fluidity, antioxidant activity, and antimicrobial activity.

• Journal of Adhesion and Interface
• /
• v.6 no.3
• /
• pp.1-9
• /
• 2005

This study investigated the influence of atmospheric plasma factors such as RF power, treatment time, the gap distance between discharge and sample, and the gas flow rate of Ar on the surface property by using the design of experiment (DOE) method. The plasma treatment time (s), plasma power (W), gap distance (mm) between discharge and sample, and flow rate of Ar gas were in order of important factors for changing the surface free energy of PMMA plates. As a result, the most effective factor for improving the surface free energy of PMMA plates is the distance (mm) from discharge glow to sample plate. Because of the interaction between plasma power (W) and treatment time (s), the power dose (J) factor which multiply plasma power (W) by treatment time (s) should be significantly considered. The optimum condition for maximizing the surface free energy of PMMA plate was found at 1500J of power dose. Through XPS and AFM analysis, we also observed the change of chemical composition, surface morphology and roughness before and after plasma treatment. It is considered that the change of surface free energy of PMMA plate with plasma treatment is influenced by the introduction of polar functional group as well as the increase of surface roughness.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.497-504
• /
• 2008

This study was conducted for the optimization of ingredients in salad dressing using Bokbunja (Rubus coreanum Miquel) juice. The experiment was designed according to the D-optimal design of mixture design, which included 14 experimental points with 4 replicates for three independent variables (Bokbunja juice $15.70\sim47.10%$, oil $23.50\sim39.20%$, vinegar $3.90\sim19.60%$). The compositional and functional properties of the prepared products were measured, and these values were applied to the mathematical models. A canonical form and trace plot showed the influence of each variable on the quality attribute of final mixture product. By the use of F-test, viscosity, color values (L, a, and b), emulsion stability and sensory characteristics (color) were expressed by a linear model, while the color values (L) and sensory characteristics (smell, taste, and overall acceptance) were by a quadratic model. The optimum formulations by numerical and graphical method were analogous: Bokbunja juice, oil and vinegar of 36.02%, 26.48%, and 12.00% by numerical method, respectively; those of 36.00%, 26.44%, and 12.06% by graphical method, respectively.

• Applied Biological Chemistry
• /
• v.32 no.1
• /
• pp.30-36
• /
• 1989

Some chelating agents are evaluated as an antioxidant for the autoxidation of soybean oil. Soybean oil is autoxidized under a mild condition (the flow rate of 67ml $O_{2}/min$ and $50^{\circ}C$). The antioxidant effect is measured by active oxygen method, and the spectral change of autoxidized soybean oil examined. The antioxidant effect of chelating agents is increased in order of diphenic acid, naphthoquinone, pyromellitic acid, quinolinic acid and naphthalic acid, and particularly the effect is low in diphenic acid and naphthoquinone. It is found that the effect is more clearly demonstrated by NMR rather than IR and UV and that the effect is dependent on the functional group and geometric molecular structure of chelating agents.

• Journal of Animal Science and Technology
• /
• v.49 no.3
• /
• pp.395-404
• /
• 2007

This study was carried out to compare the physico-chemical and sensory characteristics of surimi manufactured by four different materials. We prepared surimi from alaska pollack, as the control, by washing method. The different treatments of surimi were manufactured by pH 11.0 adjustments with barren hen breast meat(T1), commercial mechanically deboned chicken meat(MDCM)-S. Co. (T2)and MDCM- J. Co.(T3). Whiteness, cohesiveness and overall acceptability were significantly higher but gumminess, chewiness and gel characteristics were significantly lower in control than other surimi samples(P<0.05). Lightness, brittleness, deformation, jelly strength and flavor were higher but texture properties and folding test of T1 were lower than those of other treatments(P<0.05). Texture properties, shear force and gel characteristics were higher, while deformation and acceptability of T2 were lower than those of other treatments(P<0.05). On the other hand, cohesiveness was higher, and lightness and whiteness were lower in T3 than those of other treatments(P<0.05). Correlation coefficients(>0.9) among texture properties and gel characteristics was positive, while negative among surface surimi colors(P<0.05). The content of crude protein, cohesiveness and gel characteristics indicated that the acceptable surimi can be made is replaced barren hen breast meat and MDCM.