• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.94-94
• /
• 2011

최근에 산악지역에서의 국지성 강우에 의한 사고 발생이 증가하고 있고, 2009년에는 북한의 무단 댐방류로 인해 인명피해가 발생함에 따라서 산악이나 북한 지역과 같은 지역의 모니터링이 필요하게 되었으며, 강수량의 기후학적 분포의 특성과 같은 장기적인 강수량 정보가 필요하게 되었다. 레이더는 넓은 영역에 대해서 시 공간적으로 고해상도의 자료를 제공할 수 있기 때문에 국지 규모의 단시간 강수량 정보를 제공하는데 유용하다. 국립기상연구소(National Institute of Meteorological Research; NIMR)는 기존의 층운형 Z-R 관계식(Z=$200R^{1.6}$, Marshall-Palmer, 1948)을 이용한 레이더 강우강도 산출에서 과소추정 문제를 개선하기 위해 레이더-AWS 강우강도(Radar-AWS Rain rate; RAR) 산출 시스템을 개발하여 현재 운영하고 있다. RAR 산출 알고리즘은 각 레이더에 대해서 레이더 강우강도와 지상 AWS 우량계 자료를 비교하여 실시간으로 Z-R 관계식을 산출하여, 레이더 반사도를 강우강도로 변환하고, 이를 합성하여 한반도 영역에 대해서 강우강도 정보를 제공한다. 2010년에는 RAR 자료와 지상 AWS 우량계 자료를 이용하여 레이더-AWS 누적강수량을 산출하는 시스템을 구축하였으며, 현재 시험운영 중에 있다. 본 연구에서는 레이더-AWS 누적강수량의 정확도를 평가하기 위해서 2009년에 대해 레이더-AWS 누적강수량 자료와 지상 AWS 누적강수량 자료에 대해 RMSE, Bias 등의 통계값을 산출하였으며, 북한 지역에 대한 적용가능성을 분석하기 위해서 레이더 관측 반경 내의 북한 지역의 GTS 지점 자료를 이용하여 사례 분석하였다. 본 연구는 레이더 자료를 이용한 지상 관측 공백지역의 강수량에 대한 모니터링을 통하여 이러한 지역의 사고에 대비할 수 있고, 기후학적인 강수량 정보 제공 및 향후 유역별 레이더 면적강수지도 시험판 개발을 통하여 수문 기상 분야에 적용하여 효과적인 물관리에 기여할 수 있을 것으로 사료된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1117-1123
• /
• 2016

Roller-Compacted Concrete Pavement (RCCP) is a type of pavement that shares conventional concrete pavement material characteristics and asphalt pavement construction characteristics. Even though RCCP is compacted in the same way and have similar aggregate gradation to asphalt pavements, its materials and structural performance properties are similar to those of conventional concrete pavement. With cement hydration and aggregate interlock, Roller-Compacted Concrete or RCC can provide strength properties equal to those of conventional concrete with low cement content. Therefore, compaction ratio of RCC can highly influence on its strength. In general, 95% of compaction ratio is required for proper strength development. RCC strength can be highly influenced by compaction energy which depends on compaction equipment and compaction method. Therefore, it is necessary to analyze the relationship between compressive strength and compaction ratio of RCC. RCCP specimens were produced at different compaction ratio by using different compaction methods and energies. The compaction ratio was defined by the ratio of the specimen's dry density and its maximum dry density. The maximum dry density was obtained from Modified Proctor test. 28 days compressive strength corresponding to each compaction ratio case was tested. Finally, the relationship between compressive strength and compaction ratio can be analyzed. For application of roller-compacted concrete in domestic construction site, the relationship is important for field compaction management.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.171-178
• /
• 2008

Compressive strength of concrete has been regarded as a very important parameter of the quality control both in new and existing concrete pavement. It has been used a lot as the concrete strength evaluation both in the various-mixture-using laboratory and construction field using the same mixture. An error usually occurs in the test experiments of the strength, even in the test experiments with evenly mixed and compacted specimens of the compressive strength. It is caused by the 'manually operated' compressing testing, or by the specimens preparation with eccentricity. When compressive strength of evenly mixed concrete is investigated by the curing ages at the construction field, there have to be lots of specimens. And it needs much labor and cost. To substitute the endlessly repeated test experiments of compressive strength, presumption of compressive strength, by nondestructive tests, is needed. In this study, elastic waves were used among various nondestructive tests. Compressive strength of concrete was presumed according to the curing ages, by using the shear wave velocity which is not affected by restricted conditions. In the result, shear wave velocity is very closely related to the compressive strength at the evenly mixed concrete.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.3
• /
• pp.195-202
• /
• 2005

This paper presents moment-curvature analytical method of concrete filled steel tubular members considering intensity increase phenomenon by triaxial compression stress generation. For this purpose, this study considers buckling characteristics about compression department of steel members that filled up light weight and normal concrete. The analytical results are compared with the test results. Even if beam that filled up light weight concrete was calculated moment-curvature relationship easily analytically and could know that analytical results estimates as well agreed with the test results in case filled up normal concrete. In addition, the efficiency and applicabilities of the proposed moment curvature relationship algorithm are verified through conventional experimental results.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.12
• /
• pp.15-23
• /
• 2018

The occurrence of soil erosions in Korea is mostly driven by flowing water which has a close relationship with rainfalls. The soil eroded by rainfalls flows into and deposits in the river and it polluted the water resources and making the rivers become difficult to be managed. Recently, the frequency of heavy rainfall events that are more than 30 mm/hr has been increasing in Korea due to the influence of climate change, which creating a favourable condition for the occurrence of soil erosion within a short time. In this study, we proposed a method to estimate the distribution of rainfall intensity and to calculate the energy produced by a single rainfall event using the cumulative distribution function that take into account of the physical characteristics of rainfall. The raindrops kinetic energy estimated by the proposed method are compared with the measured data from the previous studies and it is noticed that the raindrops kinetic energy estimated by the rainfall intensity variation is very similar to the results concluded from the previous studies. In order to develop an equation for estimating rainfall kinetic energy, rainfall particle size data measured at a rainfall intensity of 0.254~152.4 mm/hr were used. The rainfall kinetic energy estimated by applying the cumulative distribution function tended to increase in the form of a power function in the relation of rainfall intensity. Based on the equation obtained from this relationship, the rainfall kinetic energy of 1~80 mm/hr rainfall intensity was estimated to be $0.03{\sim}48.26Jm^{-2}mm^{-1}$. Based on the relationship between rainfall intensity and rainfall energy, rainfall kinetic energy equation is proposed as a power function form and it is expected that it can be used in the design of short-term operated facility such as the sizing of sedimentation basin that requires prediction of soil loss by a single rainfall event.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.199-214
• /
• 2016

There is a negotiation between management and labors about paying incentive at the every end of the year. This result causes the conflict between management and labors. The successful operation of incentive system is based on respect and common benefit between workers and managers. The manager-trust is the power of leading reciprocality. This research started from the issues of companies with incentive system at this year. This research analysed the influence of manager-trust by the fairness of incentive system. and how HRM system affects the manager-trust through the strength of the HRM system. It appeared in a survey that shows the fairness of incentive system and manager-trust effect positive matter. As a result of the control effect in the strength of the HRM system, the relationship between distributive justice and manager-trust shows that Distinctiveness, consistency, and consensus have the control effect. Although the Distinctiveness has control effect, consistency and consensus didn't have control effect in the relationship between perceptual justice and manager-trust.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.3
• /
• pp.169-177
• /
• 2005

This study is to analyze the application of the oyster shells as a substitute fine aggregate of concrete. For this purpose, the fundamental experiments of the composed materials and the variations of the main factors on it were considered and then the variations of workability and strength properties of the specimens with each case were also studied. The experimental results on the properties as construction material showed that the use of oyster shells in concrete would not cause abnormal chemical reactions or lead to the formation of any new objects, the workability and strengths decreased with increase in proportion of oyster shells. The compressive strength of concrete with oyster shells is developed as much as that of normal concrete and the grain size of oyster shells is superior on 3.0~5.0mm and the percentage of substitution of them to fine aggregate about 30% from the properties of concrete with them. The relationship equation between compressive strength and tensile strength is ( ).

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.160-168
• /
• 2010

Recently, there are a lot of researches related to the high-fluidity concrete (HFC) with field applications. However, most applications and studies are with concretes with high strength level so there are little studies about durability evaluations such as chloride ion penetration properties with normal strength concrete. Therefore, to evaluate the durability of HFC with normal strength level, this study performed the chloride ion penetration test and observed the micro pore distribution with normal strength HFC which contains limestone powder. Experimental results showed that most micro-pores have diameters between 0.005 to 0.05 ${\mu}m$ with HFCs using limestone powder and the average diameter becomes larger with the increase of limestone powder content. Also, it was shown that, with the increase of the limestone powder content, penetration depth and diffusion coefficient of chloride ion increased and diffusion coefficient had good relationships with compressive strength and average pore diameter with the coefficient of determination over 0.90.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.2
• /
• pp.67-74
• /
• 2008

This paper provides the test results of bonding behavior of the interface between concrete substrate and carbon fiber in the rehabilitation method applying carbon fiber with epoxy based resin adhesive. The difference in each components was gradually increased subjected to the repetition of temperature variation, regardless of the strength of the substrate concrete, while the ultrasonic interface between each component occurred. An increase in difference of the temperature resulted in a decrease in bond strength of each component. Associated failure mode was shown to be interfacial failure and substrate concrete failure. No remarkable changes were found in the deformation and ultrasonic velocity of each component until the four cycles of the dry and moisture test. Hence, the moisture condition may not affect the bonding behavior of each component. After the repetition of dry and moisture test, corresponding bond strength was reduced to 40% of that before test. For the effect of freeze and thaw test, the cycle of freeze and thaw within 4 cycles resulted in debonding of each component.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.199-208
• /
• 2021

The extrudability of 3D printed concrete and its member strength can be highly influenced by water cement ratio (W/C) and printing time gap (PTG). In this study, mold cast specimens and 3D printed specimens were fabricated with variables of W/C ratio and PTG, and their shear bond strength and interlayer surface moisture content were measured and analyzed. The test results showed that the shear bond strength is greatly influenced by the amount of interlayer surface moisture. It is thus recommended that proper amount of interlayer surface moisture with respect to PTG needs to be maintained to have a required interlayer shear bond strength. In addition, further research is required to estimate the effect of many environmental factors that can influence the interlayer surface moisture content.