• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.177-182
• /
• 1999

감압증발의 효율을 향상시키기 위한 방법으로 액주내의 기포생성에 의한 자기 미립화를 수반하는 과열액분류의 증발을 분사 감압증발이라고 하며, 특히 적절한 방법으로 액체내에 기포핵을 공급하는 경우에는 매우 좋은 증발성능이 얻어 진다는 것이 보고되어 있다. 따라서 본 연구에서는 온배수를 감압증발시켜 저온저압의 증기를 제조하여 MVR로부터 승온승압에 의해 고온의 증기를 얻기위한 것이 연구의 목적이므로, 증발효율향상을 위해 기포핵 공급용 전해전류장치를 설치하고, 감압증발용의 노즐을 원통형 튜브로 대체하기위해 튜브형 노즐로 부터 과열액을 급격히 감압시켜 자기미립화에 의한 증발을 유도하여 전해전류가 증발효율에 미치는 영향을 실험적으로 연구하고자 작동액체로써 물을 사용하고, 액체온도, 액체유량, 과열도 및 기포핵 공급용의 전해전류량을 변화시켜 실험을 수행하였다.(중략)

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.77-84
• /
• 2021

To control hot spot in a plug flow reactor (PFR) is important for the yield and purity of products and safety. In this paper, coolant temperature is set as a state variable, and radial distributions of heat and mass are considered to model the PFR more realistic than without considering radial distributions. The model consists of three state variables, reactant concentration, reactant temperature, and the coolant temperature. The flow rate of the isothermal coolant is a manipulated variable. This paper shows that the controller considering the radial distributions of heat and mass is more effective than the controller without them. Assuming that u3,0 is 0.7, the suggested control equation was robust when St is bigger than 1.3, and Ac/A is smaller than 2.0. Under this condition, the hot spot temperature changed within the relative error of one percent when the temperature of input altered within the range of five percent.

• 주택과사람들
• /
• s.195
• /
• pp.72-73
• /
• 2006

8월 판교신도시에 분양되는 중대형 평형부터 채권입찰제가 적용된다. 이 제도는 청약과열을 막고 소수의 당첨자가 독점할 수 있는 시세차익을 환수해 무주택 서민의 주거안정을 위한 주택 자금으로 활용하기 위해 도입된 것. 하지만 일부에서 이른바 '버블'이 포함된 인근 시세를 기준으로 채권액을 결정하게 되면 실분양가가 너무 높아지는 것 아니냐는 비판을 제기되고 있다. 채권입찰제의 주요 내용과 시행 효과에 대해 알아보았다.

• Food Science and Preservation
• /
• v.23 no.3
• /
• pp.369-377
• /
• 2016

This study was conducted to investigate the effects of superheated steam (SHS) on volatile compounds and the quality characteristics of onion. Onion samples were treated by SHS at various steam temperatures ($100{\sim}300^{\circ}C$) for 1 min. Thiosulfinates and pyruvic acid were reduced by SHS treatment. The absorbance values obtained for thiosulfinates, the odor-causing compounds in onions, treated by were 0.889, 0.085, 0.049, 0.049, and 0.045, while that of the untreated control sample was 1.587. The pyruvic acid contents of onions treated by SHS were 7.57, 5.85, 1.66, 0.47, and 0.26 mg/mL, while that of the untreated control sample was 8.00 mg/mL. Volatile compounds such as, dipropyl trisufide, 1,3-propanedithiol, methyl thiirane, methyl propyl trisulfide, diallyl disulfide, 1-(methylthio)-1-propene, 1,1-thiobis-1-propene, 1,1-sulfinyl bispropane, dimethyl tetrasulfide, methyl propenyl disulfide, dimethyl trisulfide, and diallyl disulfide were reduced by SHS treatment. The results showed that antioxidant activities in the of onion samples were improved by SHS treatment. The hardness and chewiness of onions treated by SHS were significantly lower than those of the untreated control onion sample. Sensory evaluation suggested that SHS could help lower off-flavors in and enhance the palatability of onions. These results suggest that the application of SHS treatment to onions can decrease their off-flavors, change their textural attributes, and promote their sensory properties.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.5 no.1
• /
• pp.1-9
• /
• 1993

Mass transfer coefficients were measured for water vapor absorption into a LiBr-Water solution of 60wt% flowing down an absorber of vertical tube type. The absorber is copper tube of 25mm inner diameter and 1000mm length. The film Reynolds number were varied in the range of 35~130. The solution is fed from the top of the pipe, and the conditions of solution are supercooled liquid and superheated liquid. As results, the flowrates of LiBr solution which takes peak value of average absorption mass flux exist. Mass transfer coefficients decrease with increasing the flowrate of LiBr solution, and the decrease rate in the case of supercooled liquid is large as compared with that in the case of superheated liquid. But the absorption rate of supercooled liquid is decidedly superior to that of superheated liquid.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.4
• /
• pp.363-370
• /
• 2000

Experiments have been peformed, using pure refrigerant R134a and a zeotropic refrigerant mixture R290/R600a(60%/40%) and their performances have been analyzed by the first and second laws(exergy method) of thermodynamics. From the experimental results, variations of compressor speed and air temperature have a great effect on the performance of the system. The sum of exergy losses in compressor and evaporator is about 60% of total exergy loss, using refrigerant R134a, so it is necessary to improve the performance of compressor and evaporator. According to the experimental results using refrigerant mixture of R290/R600a(60%/40%), the exergy losses in heat exchange processes are decreased but the exergy loss in throttling process is increased. The performance of the system has been improved by 20∼30% compared with that of R134a and exergy losses have been also reduced.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.14-22
• /
• 1999

본 연구는 일반적으로 소·중용량의 냉동·공조기에 많이 사용되고 있는 플레이트 핀 코일형 공냉응축기를 대상으로 수치해석에 의해 응축기의 특성을 파악하였다. 해석에서는 응축기를 과열증기영역, 2상영역 및 과냉각액영역으로 구분하여 공냉 응축기의 성능에 큰 영향을 미치고 있는 공기온도, 공기측열전달률, 입구 냉매온도, 응축온도 및 질량유량 등을 파라메터로하여 이들의 상호관계와 이들이 응축완료점까지의 거리 및 방열량 등에 미치는 영향을 파악하였다. 해석결과로는 해석모델로부터 각 영역의 냉매 상태량, 온도분포 및 열전달률을 구할 수 있었고, 일반적으로 응축기의 성능에 많은 영향을 미치는 각종 파라메터들을 중심으로 광범위한 동작조건에서 이들의 상관관계 및 특성을 파악하므로서 응축기 설계를 위한 기초 자료 및 설치장소나 주위환경 등에 따라 서로간에 다양한 영향을 미치는 실제장치의 동적특성 해석을 위한 자료를 얻을 수 있었다.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.174-178
• /
• 2009

A mushy layer of dendritic crystals is often formed during solidification of a binary mixture. Natural convection in the mushy layer is analyzed by using the propagation theory we have developed. The critical Rayleigh numbers for the onset of convection are evaluated numerically using the self-similar stability equations based on Emms and Fowler's model. The present results approach those from quasi-static stability analysis in the limit of a large superheat or a small growth rate of the mushy layer.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1997.10a
• /
• pp.114-121
• /
• 1997

회전 열파이프의 열전달 성능은 액막 두께 및 증발부로 귀환되는 응축 액막 유동율에 의해 결정된다. 그 동안 응축액 유동율을 촉진시키기 위하여 용기 내벽에 groove, 테이퍼 및 나선형 코일을 삽입하여 유동율을 높이는 방법들이 연구되었다. 본 연구도 회전 열파이프의 내부 관벽 구조에 관한 것으로써 삼각 단면을 갖는 회전 열파이프의 열전달 특성을 파악하고자 하였다. 삼각 단면을 갖는 회전 열파이프는 고속 회전 영역에서 모서리 부분으로 액막이 집중되어 관 내벽에 형성되는 액막 두께를 줄일 수 있으나 증발부에서 국부적인 과열이 발생되어 불안정한 작동 상태를 나타내었다. 따라서 본 연구에서는 개선방안으로 증발부에 부분적으로 원형관을 접합하였으며, 그 결과 dry-out의 억제와 함께 삼각 유동 단면에 의한 액막 두께 감소 효과를 볼 수 있었다. 회전체 발열부 냉각에 적용시키기 위해서는 앞으로 최적의 기하학적 형상에 따른 충전율 및 액막에서의 열전달에 대한 정량적인 해석 연구가 필요할 것으로 생각된다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.5 no.4
• /
• pp.257-264
• /
• 1993

This is the second report of a three part study on the absorption and heat transfer characteristics of absorber, the correlation of refrigerating capacity and heating capacity. The 2nd report deals with the heat transfer characteristics of a vertical falling film type absorber of inner copper tube. The solute is LiBr-Water solution(60wt%) and the solvent is water vapor. The film Reynoles numbers are varied in the range of 35~130. The states of LiBr solution at the top of absorber are supercooled liquid and superheated liquid. The results are summarized as follows ; Heat transfer results reveal that for the absorption of falling film, the state of LiBr solution appears to be influential in determining the heat transfer. Thus, for the state of supercooled liquid, heat transfer coefficient decreases with increasing the film Reynolds number, but in the condition of superheated liquid, it increases conversely. The mass transfer coefficients that were presented in the 1st.report and heat transfer coefficients of this paper are presented as the dimensionless correlation. The optimum water flowrate which brings about maximum value of heat flux in the film exists, and that increases with increasing the cooling water temperature.