• Journal of the Korean Society for Railway
• /
• v.15 no.3
• /
• pp.237-243
• /
• 2012

In this paper, a magnetic analysis of SRM(Switched Reluctance Motor) using 3d finite element method considering end-coil effect is presented. SRM models with different stator pole shapes are taken into consideration for the analysis of magnetic characteristics. It is observed that a stator pole shape model having a pole shoe depth is the most suitable one for railway traction application because it gives an improved inductance and torque characteristic. For a speed control of SRM, the PI and sliding mode controllers are applied to designed SRM with magnetic characteristic data obtained from the magnetic analysis. The simulations are carried out using Matlab-Simulink and the control performance is analyzed. By employing the sliding mode controller, the transient response as well as the steady-state error are much improved under a load variation of railway resistance under operation.

• Journal of the Korean Institute of Gas
• /
• v.20 no.4
• /
• pp.1-6
• /
• 2016

A fuel supply system of heavy-duty CNG engine is composed as a module structure which is integrated by about 6 injectors. There are only one input and output passage for gas fuel supply in this injector module. The response performance for transient operation of an CNG engine is very poor because only one output fuel supply line is connected to the intake pipe after a throttle valve. In this study, a new guideline and internal flow design for the CNG injector module is suggested for the improvement of response performance by fluid dynamic simulations. As a result, the response performance of gas fuel supply can be improved by decreasing the total volume of internal flow passages and a same distance design from each injector to the exit of module shows good response performance and acquirement of linearity of fuel supply. But the injection order has little influence to injection performances.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.4 s.37
• /
• pp.667-676
• /
• 1998

The transient analysis of partially supported laminated plates with rectangular holes under uniformly distributed transverse load is studied using finite element method. The first-order shear deformation theory and the variational energy method are employed in mathematical formulation. The effects on central deflection by plate thickness ratio, material modulus ratio, ply lamination geometry and boundary conditions are investigated Numerical results are presented and comparisons of the results by the present method with those given in the literature are made.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.393-394
• /
• 2010

본 논문은 LCL필터를 이용한 분산전원용 계통연계형 PCS의 전류제어기를 비교 분석하였다. 주요 비교대상은 PI(Proporional-intergral)제어기, PR(Proportional-Resonant), 제어기, DeadBeat (DB)제어기 등의 선형 제어기 이며, 각 제어기의 과도상태 응답특성과 정상상태 응답특성을 시뮬레이션으로 비교하였다. 또한 DSP의 특성에 의한 1 주기 지연, 리액턴스와 저항 변화 등에 강인한 DB제어기 관하여 논의 하겠다.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.11-12
• /
• 2010

본 논문은 LCL필터를 이용한 분산전원용 계통연계형 PCS의 전류제어기를 비교 분석하였다.주요 비교대상은 PI(Proporional-intergral)제어,PR(Proportional-Resonant),제어기, DeadBeat (DB)제어기 등의 선형 제어기 이며, 각 제어기의 과도상태 응답특성과 정상상태 응답특성을 시뮬레이션으로 비교하였다. 또한 DSP의 특성에 의한 1 주기 지연, 리액턴스와 저항 변화 등에 강인한 DB제어기 관하여 논의 하겠다.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.126-134
• /
• 1998

본 연구에서는 회전운동을 제어하기 위한 새로운 작동기로서 전기장에 대하여 매우 빠른 응답특성을 갖고 있는 두 쌍의 실린더형 ER(electro-rheological) 클러치/브레이크 작동기를 제안하였다. 자체조성 된 ER유체의 빙햄특성 모델을 실험적으로 도출하였으며, 이와 연계한 작동기 모델을 구성하여 전기장에 따른 전달 및 제동 토크를 해석한 후 알맞은 크기의 클러치/브레이크 작동기를 제작하였다. 제작된 작동기의 동적특성(시상수 등)을 작동기 모델에 고려하기 위하여 계단입력 전기장에 따른 과도응답 실험을 클러치와 브레이크 모드에서 각각 수행하였다. 제안된 작동기의 응용성을 보이기 위하여 두쌍의 작동기로 구동되는 실험실 차원의 소형 와권식 세탁기 시스템을 구성한 후 동적지배방정식을 유도하다. 각 작동기와 연계된 PID제어기를 설계하여 세탁과 탈수시의 회전운동을 제어하였으며, 부하질량의 변화에 대한 작동기 시스템의 제어 효율성과 장시간 운전을 통한 제어 내구성 실험을 수행하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.3
• /
• pp.33-42
• /
• 2004

While transforming the inelastic system into the equivalent elastic one gives an advantage of simpler analysis, the actual inelastic behavior of the system is hardly modeled in the capacity spectrum method (CSM). Therefore, the accuracy of CSM depends on the precise estimation of equivalent period and damping ratio as well as the modification of the elastic response spectrum and the corresponding demand spectrum. In this paper, the effect of demand spectrums on the accuracy of CSM is evaluated. First, the response reduction factors provided in ATC-40 and Euro Code are evaluated. Numerical analysis results indicated that the acceleration responses obtained using the factor of Euro Code are closer to the actual response than those obtained using the factors of ATC-40. Next, the accuracy of CSM is evaluated constructing the demand spectrum using the absolute acceleration responses and pseudo acceleration responses. The results obtained using the absolute acceleration responses were found to be generally larger than those obtained using the pseudo ones. Since CSM often underestimates the response, the use of absolute acceleration response gives the response relatively closer to the exact ones. However, the difference becomes negligible as the hardening ratio and the yield strength ratio become larger.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.4
• /
• pp.415-422
• /
• 2016

When shock acceleration is applied to a mechanical system, it may cause malfunctioning and damage to the system. Hence, to prevent these problems when developing a gimbal structure system for observation reconnaissance, the MIL-STD-810G shock standard must be satisfied as a design specification. Rubber vibration isolators are generally assembled on the base of the system in order to reduce the shock transferred from the aircraft. It is difficult to analyze the transient behavior of the system accurately, because rubber has a nonlinear load-deformation curve. To treat the nonlinear characteristic of the rubber, bilinear approximation was introduced. Using this assumption, transient responses of the system under base shock acceleration were calculated by the finite element method. In addition, experiments with a true prototype were performed using the same conditions as the analytical model. Compared with experimental data, the proposed numerical method is useful for the transient analysis of gimbal structure systems, including rubber vibration isolators with nonlinear stiffness and damping.

• 전기의세계
• /
• v.36 no.9
• /
• pp.658-664
• /
• 1987

최적이득을 구하는 해석적인 방식으로 안정여유에 의한 최적화방식과 공액경사법에 의한 최적화방식을 살펴보았으며, 두방식을 비교해 보면 몇몇 문제점이 존재하나 다음의 몇가지 점에서 공액경사법에 의한 최적화방식이 더 우수하다는 것을 알 수 있다. 1) 제어루우프내의 제어기 수에 관계없이 이 방식을 쉽게 적용할 수 있다. 2) 시스템을 수식으로 모델링할 때 거의 간략화함이 없이 표현하므로 실제 시스템과의 오차를 줄일 수 있다. 3) 평가함수 내의 가중치를 조정하여 원하는 과도응답을 가지는 최적이득으로 유도할 수 있다. 공액경사법에 의한 최적화방식은 벡터제어나 전류제어PWM등 보다 복잡한 제어루우프에도 쉽게 적용시킬 수 있으며 직류기 및 서보전동기의 속도 및 위치 제어시스템에도 적용이 가능하다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.1
• /
• pp.66-71
• /
• 1998

Discretization method and numerical calculations of wigner function to introduce the influence of spatially varying effective mass as well as to reduce the error involved in the conventional discretization model are presented. Using this new discrete model, the transient responses of resonant-tunneling-diode are analyzed.