• Proceedings of the Korea Association of Information Systems Conference
• /
• 1997.10a
• /
• pp.463-469
• /
• 1997

본 연구에서는 경영환경 및 정보기술의 변화에 경영 정보학 교육이 어떻게 적응해 나갈 것인지 경영 정보학 교수와 정보시스템 실무자들의 인식을 조사 분석하였다. 40명의 경영정보전공 교수와 22명의 정보시스템 실무자들은 정보시스템 전문가가 갖추어야 할 경 영능력, 이들이 숙지해야 할 최근 정보관련 이슈, 또 정보시스템 전문가에게 요구되는 정보 기술에 대한 지식 및 활용 능력 등에 관해 거의 일치된 견해를 보였다. 경영정보 전공 교수 들은 변화하는 정보기술을 반영한 새로운 교과목을 개발하고 대학당국에서는 경영정보학이 유사공학분야(Psuedo-engineering)임을 인식하고 교과과정 개편과정에 신축성을 부여하고 이공계에 준하는 실습시설 및 연구지원을 해주어야 실무에서 원하는 인재를 양성할 수 있을 것이다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.153-163
• /
• 1996

An expert system to design compressor valve systems has been developed. Design process is viewed as a chain of devisions based on the results of necessary analyses. Actual design is implemented by the interaction between the expert system and the user. In this work, it is demonstrated how a final design is achieved by utilizing the rule bases and analysis capability of the system. The structure of the rule bases and related parameter studies are also explained. Advantages of using an expert system approach for valve designs are explained using a practical example.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.4
• /
• pp.15-21
• /
• 1997

Pneumatics is widly used in the industrial implementation, in the operation of air-powered actuators and the control devices needed in their operation. However, there are many empirical factors in pneumatics design, it might cause excessive design of pneumatic components. For that reason, we developed VDES(Vacuum Design Expert System) for the economic design of pneumatic vacuum equipment. VDES is achieved with CLIPS(C Language Integrated Production System) and knowledge base that contains a number of facts and rules for pneumatic vacuum design. Forward chaining and depth first search technique are used in this system. Appling VDES to the actual field, this system is verified to be a good efficiency and could be applied to the field of pneumatic vacuum equipment design.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.2 s.75
• /
• pp.81-86
• /
• 2007

This paper presents a computer aided process planning system integrating case-based reasoning and expert system for block assembly in shipbuilding. Expert rules are extracted from the case-base where cases are represented as a set of constraint-satisfaction problems. Rules for the expert system are extracted by generalizing the constraints. In generalizing the constraints, parts are generalized as variables or as part-types. The system was developed with CLIPS, an expert system shell. As more cases are collected, more rules will be extracted and the existing rules will be updated.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.1
• /
• pp.67-71
• /
• 2003

This paper presents the use of an evert system to automate process planning of block assembly, a task that is usually completed manually. In order to determine the sequence of assembly operation, a search method guided by rules, such as merging of related operations, grouping of similar operations, and precedence rules based on know-hows and geometrical reasoning, is used. In this paper, the expert system developed is explained in detail regarding a global database, control strategies, and rule bases. For verification purposes, the evert system has been applied to simple examples. Since the rule bases are isolated from the inference engine in the developed system, it is easy to add more rules in the future.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.4
• /
• pp.8-14
• /
• 2012

Two dimensional nesting is a common problem in industries such as the shipbuilding, automotive, clothing, shoe-making, and furniture industries, in which various parts are cut off from stock or packed in a flat space while minimizing waste or unoccupied space. Nesting is known as an NP-complete problem, which has a solution time proportional to the superpolynomial of the input size. It becomes practically impossible to find an optimal solution using algorithmic methods as the number of shapes to nest increases. Therefore, heuristic methods are commonly used to solve nesting problems. This paper presents an expert system that uses a heuristic search method based on an evaluation function for nesting problems, in which parts and stock are represented by pixels. The system is developed in CLIPS, an expert system shell, and is applied to four different kinds of example problems to verify its applicability in practical problems.

• 전기의세계
• /
• v.58 no.11
• /
• pp.51-56
• /
• 2009

산업이 고도로 발달함에 따라 자기장의 정밀 측정 및 발생 등에 대한 관심이 증대되고 있다. 정밀 자기장 측정기를 이용하여 생체.의료공학, 지하광물 및 매설물 탐사, 지진 및 전파방해 예측, 지구물리탐사 및 우주 자기장 분포 측정, 항법장치, 국방 및 우주항공분야, 송유관 부식 연구 등에 활용되고 있다. KRISS에서는 첨단 자기분야의 표준/정밀측정 보급 지원을 위해 자기장 범위 $20\;{\mu}T$ ~ 1.2 mT에서 비자성 실험실, 지구자기장 상쇄장치 등을 이용하여 불확도 (4 ~ 21) ${\mu}T$/T, 자기장 범위 1 mT ~ 2.5 T에서는 헬름홀스 코일, 전자석, NMR 자기장 측정기 등을 사용하여 불확도 (10 ~ 80) ${\mu}T$/T의 표준을 유지하고 있다. 자기장는 자속(magnetic flux) 및 자속밀도(magnetic flux density)로 나눌수 있으며, 그 SI 단위는 웨버(Wb, weber)와 테슬러(T, tesla)이다. 그러나 아직까지 자성재료 등의 특성을 측정하는 전문가들은 SI 단위보다는 지금까지 널리 사용되어온 cgs 단위인 맥스웰(Mx, maxwell), 가우스(G, gauss), 외르스테드(Oe, oersted) 등에 익숙해져 있다. 앞으로 자기분야 전문가들도 기본 SI 단위로부터 소급이 유지되는 SI 자기단위의 사용을 기대해 본다.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.185-192
• /
• 2003

This paper proposes an efficient mechanism design system of multi-stage gear drives including not only parallel shaft gears but also non-parallel gears such as bevel and worm gear drives. The system automatically generates three dimensional structures of specification-adjusted mechanisms, and shows the sorted list of the mechanisms according to the evaluation result by using a fuzzy expert system. The list can be used as reliable candidates of the spatial mechanism structures of multi-stage gear drives. Thus, it is expected that the system can increase the efficiency of design and cut off the expenses of preliminary design considerably.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.73-84
• /
• 1999

An advanced expert system for supporting automatic polishing operation of mold and die has been developed. The goal of this system is to minimize the polishing time, the number of polishing and tools used. Also, this paper proposes the advanced concept of the polishing method to perform polishing operation of mold and die, and it has adapted to the orthogonal array method. as a statistical technique, to choose an optimal polishing condition. An expert system consists of the polishing machining database that includes the information of workpiece and polishing tools, and the input/output module.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.50-58
• /
• 1998

A proper model of expert system for the very thin sheet metal press die design has been suggested. Using the suggested model, an expert system of the very thin sheet metal press die has been developed. This study contains that the results from the developed system for three kinds of specimens have the adaptability in the actual site. In addition, the possibility for expansion of this system has been discussed. The developed system, which is based on the knowledge base, has been included in a lot of expert's technology in the practice field. C-language under the HP-UNIX system and CIS customer language of the EXCESS CAD/CAM system have been used as the overall CAD environment. Results from this system will provide effective aids to the designer in this field.