• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.141-144
• /
• 2010

건설공사 프로젝트는 기획, 설계, 시공, 운영 및 유지관리 등 각 단계의 다양한 참여 주제에 의해 프로젝트가 진행되고 각 분야 간 원활한 의사소통을 통한 협업으로 일을 진행해 나간다. 그러나 각 단계별 커뮤니케이션이 원활히 이뤄지기가 힘들며, 이러한 단계별 분절의 가장 큰 이유 중 하나가 실제적 결과물은 3차원 기반인 것에 비해, 그 과정이 2차원 CAD 시스템에 의존하는 결과와 과정의 격차 때문이다. 그로 인해 각 관련 분야에서 발생되는 정보의 불확실성, 부정확성, 표현의 애매모함 등으로 인해 재작업 및 불필요한 작업이 빈번히 발생하여 전체적인 공정의 지연 및 비용의 문제, 결과물의 품질에 대한 문제가 발생하고 있다. 또한 도면에서의 한계점인 거리감, 공간감 등 실제 사람이 느끼는 Scale감을 알 수 없어 공간에 대한 이해도가 떨어지는 한계점을 극복하지 못하고 있으며 1인칭 작업운영 방식으로 인하여 협업 설계과정에서 원활한 팀워크를 유도 할 수 없다. 따라서 본 연구에서는 협업설계 과정에서 기본설계 단계를 지원하는 설계 도구로서 건축모델의 단순 시각화에서 벗어나 가상공간에서 몰입형 VR 시뮬레이션을 구현하기 위하여 프로토타입 응용을 개발 하였고, 이것을 "Digital Studio"에 구현하여 즉각적인 공간 시뮬레이션을 통하여 실제 시공 전에 문제점들을 검토 및 보완하고 전체적으로는 생산성 향상과 설계 과정 중 오류를 최소화하기 위한 VR시뮬레이션 시스템의 제안 및 Viewer 모듈을 개발 하였다.

• Korean Journal of Materials Research
• /
• v.7 no.5
• /
• pp.397-402
• /
• 1997

석탄계 핏치의 열처리 온도 및 압력에 따른 결정화도와 기공도 그리고 산화저항성 등을 관찰하였으며, hexagonal type 4D 탄소/탄소 복합재를 석탄계 핏치로 가압함침 및 탄화시킨 다음 가해준 압력이 고밀도화에 미치는 영향을 관찰하였다. 석탄계 핏치의 가압탄화 압력이 흑연화도에 크게 영향을 미치지 않았으며, 기공면적비에 있어서는 압력을 600bar로 상승시켜 줌으로써 상압 처리한 경우 보다 1.5배 정도 감소 하였다. $650^{\circ}C$까지 열처리하여 얻은 코우크스의 산화반응 개시온도는 처리압력이 증가함에 따라서 지연되었다. 탄소/탄소 복합재의 함침압력을 100bar에서 600bar로 상승시켜 줄 경우 밀도 증가율이 크게 향상 되었으며 기공도는 감소하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.987-992
• /
• 2002

In this paper, a new clock and data recovery circuit is proposed for the application of data communication systems requiring ㎓-range clock signals. The circuit is suitable for recovering NRZ data which is widely used for high speed data transmission in ㎓ ranges. The high frequency jitter is one of major performance-limiting factors in PLL, particularly when NRZ data patterns are used. A novel phase detector is able to suppress this noise, and stable clock generation is achieved. Futhermore, the phase detector has an adaptive delay cell removing the dead zone problem and has the optimal characteristics for fast locking. The proposed circuit has a convenience structure that can be easily extended to multi-channels. The circuit is designed based on CMOS 0.25㎛ fabrication process and verified by measurement result.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.4
• /
• pp.257-265
• /
• 2009

This paper considers the hybrid flow shop scheduling problem for the objective of minimizing the number of tardy jobs. In hybrid flow shops, each job is processed through multiple production stages in series, each of which has multiple identical parallel machines. The problem is to determine the allocation of jobs to the parallel machines at each stage as well as the sequence of the jobs assigned to each machine. Due to the complexity of the problem, we suggest search heuristics, tabu search and simulated annealing algorithms with a new method to generate neighborhood solutions. In particular, to evaluate and select neighborhood solutions, three surrogate objectives are additionally suggested because not much difference in the number of tardy jobs can be found among the neighborhoods. To test the performances of the surrogate objective based search heuristics, computational experiments were performed on a number of test instances and the results show that the surrogate objective based search heuristics were better than the original ones. Also, they gave the optimal solutions for most small-size test instances.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.3
• /
• pp.64-70
• /
• 1994

We propose a new method to deal with optimal auto-tuning of the PID controller which is used to process control in various fields. First of all, in this method, 1st order system which was modeled from the unit step response of the system is Pade-approximated, then initial values are determined by the Ziegler-Nichols method. Finally, we can find the parameters of PID controller so as to maximize the fuzzy criterion function which includes the maximum overshoot, damping ratio, rising time and settling time. The Proposed method also shows good adaptability for variations in characteristics and dead m e of the system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.561-564
• /
• 2005

This paper proposes an access control algorithm for guaranteeing fair packet transmissions in CDMA-based slotted ALOHA systems. In the proposed algorithm, the base station calculates the packet transmission and retransmission probabilities based on the offered loads and then broadcasts these probabilities to all mobile stations. Mobile stations, which have a packet to transmit, attempt to transmit a packet with the received probabilities. Simulation results show that the proposed algorithm can offer better system throughput and average delay than the conventional algorithm. Results also show that the proposed algorithm can guarantee a good fairness among all mobile stations regardless of the offered loads.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.575-577
• /
• 2017

In public key cryptography such as RSA, modular exponentiation is the most time-consuming operation. RSA's modular exponentiation can be computed by repeated modular multiplication. To attain high efficiency for RSA, fast modular multiplication algorithms have been proposed to speed up decryption/encryption. Montgomery multiplication is limited by the carry propagation delay from the addition of long operands. In this paper, we propose a hardware structure that reduces the area of the Montgomery multiplication implementation for lightweight applications of RSA. Experimental results showed that the new design can achieve higher performance and reduce hardware area. A frequency of 884.9MHz and 250MHz were achieved with 84K and 56K gates respectively using the 90nm technology.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.169-172
• /
• 2004

The effect of the process parameters on the stable lifetime in rapid thermal firing(RTF) was investigated in order to optimize the process for the Cz-silicon. The process temperature was varied between $700^{\circ}C\;and\;950^{\circ}C$ while the process time was chosen 1 s and 10 s. At below $850^{\circ}C$ the stable lifetime for 10 s is higher than that for 1 s and increases with increasing by the process temperature. However, at over $850^{\circ}C$ the improved stable lifetime is not dependent on the process time and temperature. On the other hand, two high temperature processes in solar cell fabrics are combined with the optimized process and the non-optimized process. The last process determines the stable lifetime. Also, the degraded stable lifetime could be increased by processing in optimized process. The decreased lifetime can increase using the optimized oxidation process, which is a final process in solar cells. Finally, the optimized and non-optimized processes are applied solar cells.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.4
• /
• pp.141-148
• /
• 2022

New services such as OTT have appeared, and the value chain of the media industry has formed a complex terrain, and new problems have arisen in terms of fair competition between operators and user protection. However, the problem of introducing OTT under the existing law that classifies services by physical characteristics and technical elements of the network has been criticized in terms of hindering industrial activation due to excessive regulation. The introduction of the new regulatory system has been delayed for a long time despite the dissatisfaction of stakeholders and attempts to legislate

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.2
• /
• pp.20-27
• /
• 2022

Hypergolic propellant ignited spontaneously when fuel and oxidizer contact without ignition system. Due to this characteristic, the risk of accidents is high when new propellants are evaluated. Prevention of accidents is very important because the damage can be large when the accident occur. In this work, we proposed non-ignition evaluation method which can replace conventional ignition evaluation method by using microreactor. The reactor was fabricated by MEMS. The heat of reaction as according to fuel and NaBH₄ was estimated. At the condition of highest heat of reaction ignition was observed by drop test.