• 한국가시화정보학회지
• /
• 제16권1호
• /
• pp.42-47
• /
• 2018

A needle-free injector is one of the new non-invasive players in impregnating the biological barriers. It is considered as the next phase in drug delivery and therapeutic applications. One of the major fields of application is in skin remodeling procedures. Although many studies were carried out in understanding the principle in the needle-free injection procedure, fewer studies were done with the aim of therapeutic applications. In the present study, we tried to identify key parameters that affect the jet divergence and peak stagnation pressure on the skin surface in a conventional needle-free injector for skin treatment. A summary of the working principle and effect of the key parameters are presented.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.152-167
• /
• 2001

Recently safety systems for the commercial vehicle have been rapidly developed. However, we still have many problems in the vehicle stability and the braking performance. Especially, a commercial vehicle may meet a dangerous braking condition when the vehicle is lightly loaded or empty and when the road is wet or slippery. Under these conditions, the truck can spin out or the tractor can jackknife or the trailer can swing out. To design the air brake system for the commercial vehicle, since the air brake system has many design variables, there must have been intensive researches on a method how to prevent dynamic instability and how to maximize the vehicle deceleration. In this study, mathematical models about the tractor-semitrailer and the air brake system including an ABS controller have been constructed for computer simulation. Also, simple examples are applied to show the usefulness of the program. Designers can use this simulation program for understanding the braking characteristics such as trajectory, braking distance, longitudinal deceleration, lateral deceleration, and yaw rate on various road conditions.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2005년도 춘계학술발표논문집
• /
• pp.132-135
• /
• 2005

본 연구에서는 반도체 제조 공정에 이용되는 가스의 흐름을 감지하고 제어하는 장치를 제안하였다 압력센서를 MFC(Mass Flow Controller)에 의해 제어되는 다음 단의 파이널밸브(Final Valve)와 챔버사이의 가스관에 부착시켜, 이 압력센서의 신호와 공압밸브의 동작 신호를 디지털 회로를 이용하여 실시간으로 제어하도록 하였다. 이로써 반도체 제조 공정 중에 발생할 수 있는 2차 소성물로 인한 가스의 흐름 제어와 관련된 시스템 고장을 LED를 통해 실시간으로 확인 가능하다. 또한 가스누출고장발생 시 반도체 제조 공정의 프로세스를 중단시켜 장비의 손상 및 안전사고를 예방하는 기능도 있다. 본 연구에서 개발된 모듈을 이용함으로써 가스밸브의 오동작에 의한 반도체/디스플레이 제조장비의 신뢰성 향상을 기할 수 있다.

• 한국산업융합학회 논문집
• /
• 제11권4호
• /
• pp.209-216
• /
• 2008

The ball screw position control system driven by a pneumatic motor using continuous sliding mode is proposed. The design and performance of proposed servo system are presented by means of examples tested under practical service conditions. Results of experimental implementation on the proposed system illustrate the effectiveness of the ball screw position control system driven by a pneumatic motor using continuous sliding mode as a servo pneumatic actuator driven by a pneumatic motor.

• 유공압시스템학회논문집
• /
• 제3권1호
• /
• pp.15-19
• /
• 2006

In this study, a measurement method of leakage flow-rate for pneumatic driving apparatus is proposed. The existing measurement methods of leakage flow-rate of air need disassemble the test component. Therefore, there is no effective method to measure the leakage flow-rate while operating pneumatic driving apparatus. In this study, the leakage flow-rate is measure from the pressure change in an isothermal chamber that can realize isothermal conditions by stuffing steel wool into it. Therefore, wide range of flow-rate could be measured only from the pressure response and the leakage flow-rate can be measured during operating pneumatic driving apparatus. The effectiveness of the proposed method is proved by experimental results.

• 유공압시스템학회논문집
• /
• 제2권1호
• /
• pp.15-22
• /
• 2005

The purpose of this study is to find the effective dynamic characteristics of an improved pneumatic cushion cylinder with a spring type needle valve. The dynamic model represented the peak pressure control method when the pneumatic cushion cylinder is moving forward or backward in the horizontal direction. It was found from the simulation results that the peak pressure in the cushion chamber is affected by the spring, which helps to understand the performance of the pneumatic cushion cylinder and to improve or design a better cushion needle valve component. From the simulation results, the stability of pneumatic cushion cylinder with a spring type needle valve was superior and its cushion capability was also better than that without the spring.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.217-220
• /
• 2010

본 논문에는 가스발생기를 사용한 사출시스템의 성능향상 즉 최대가속도를 줄일 수 있는 방법 중 하나인 노즐마개의 파열압 저감에 대한 내용이 기술되어있다. 여러가지의 노즐마개를 제작하여 공압시험으로 파열압을 측정하여 노치의 형상과 파열압과의 관계를 조사하였다. 파열압을 저감시킨 노즐마개를 적용하여 가스발생기를 제작, 시험한 결과 기준모델과 비교시 최대가속도를 저감에 효과적임을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.85-88
• /
• 2002

저항 스폿용접은 두 개의 금속판을 서로 겹쳐서 양쪽에 전극으로 압력을 가하면서 대전류를 흘려보낼 때 재료의 접촉면의 저항에 의해 발생하는 줄울열을 이용하여 재료를 용융시켜 두 모재를 접합시키는 방법이다 산업현장의 자동 용접라인에서 로봇암의 끝단에 부착하여 사용하던 기존의 공압건은 시편에 주어지는 압력이 일정하여 실시간 가압력 변화가 어렵고, 전극벌림의 임의 조정이 불가능하였다. 본 연구에서는 서보 모터를 채용한 서보건 시스템의 실시간 가압력제어와 용접도중 일정한 파우어를 공급하는 정전력 제어방식을 이용하여 용접 품질을 향상시키고자 한다.

• 로봇학회논문지
• /
• 제18권4호
• /
• pp.456-462
• /
• 2023

In recent years, the use of robot arms has increased rapidly in both industrial and service applications. Unlike production sites, where only one type of gripper is used for productivity, service sites often use a tool changer to replace fingered grippers or vacuum grippers to cover various objects to be grasped. To this end, a tool changer-based pneumatic grasping system was developed in this study. In order to simultaneously use a positive pressure-based pneumatic gripper and a negative pressure-based vacuum gripper, a small vane pump capable of generating positive and negative pressures depending on the direction of rotation was developed. Experiments with actual prototypes have shown that the pneumatic system based on the developed vane pump can effectively realize both pneumatic grippers and vacuum grippers.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.31-36
• /
• 2007

The excavator is complex machinery which has widely used in the construction site, deck of harbor and deep sea. The one of important issue of excavator system in recent is an automation of it in order to improve a working efficiency, a convenience working circumstance and work satisfaction. However, since there are large nonlinearities of control circuit, actuating cylinder, joiners of hydraulic units and changing loads etc., it is difficult to develope an automatic excavator system. Therefore, in this study, toy scale pneumatic excavator system is constructed and the remote control system is installed on it, before developing the automatic excavator system. In order to design the control system of the developed pneumatic excavator system, the transfer function is obtained using signal processing method and the controller gains of PID are decided based on CDM(coefficient diagram method). The obtained transfer function and the performance of the proposed control system is evaluated through experiments and computer simulation.