• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.2
• /
• pp.1-7
• /
• 2008

Effect of radial position of half-wave resonator is investigated experimentally for acoustic damping in a combustion chamber by adopting acoustic cold test. Acoustic damping is quantified by damping factor. When resonator with optimal tuning length is installed, damping is enhanced as its radial location is away from the center of the faceplate. And, spatial profile of damping factor is similar to that of the amplitude of the acoustic mode to be damped. As the location is close to the center, acoustic damping is mitigated and independent of the resonator length. On the other hand, the resonator with non-optimal length dose not show any effects of its radial position. Acoustic-damping capacity can be evaluated as functions of resonator length and position.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.17-20
• /
• 2007

Effect of radial position of half-wave resonator is investigated experimentally for acoustic damping of tangential mode in a combustion chamber by adopting acoustic cold test. When resonator with optimal tuning length is installed， damping is enhanced as its radial location is away from the center of the faceplate. And, radial profile of damping factor is similar to that of the amplitude of the acoustic mode to be damped. As the location is close to the center, acoustic damping is mitigated and independent on the resonator length. on the other hand， the resonator with non-optimal length dose not show any effect of its radial position.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.9-16
• /
• 2008

Ribbed birch (Betula costata Trautv.), Japanese larch (Larix kaempferi (Lamb.) Carr.), and tulip tree (Liriodendron tulipifera L.), were used as experimental specimens to measure the sound absorption coefficient with various resonator types, regular resonator (Type-R), eccentric resonator (Type-E), aligned resonator (Type-A), and screwed resonator (Type-S). Resonators consisted of the simple perforation by hand drilling. Sound absorption performances of the resonators installed perforations were better than those of untreated specimens. They were varied with the resonator's type and wood species. Increased area by a wood screw gave no significant change on the sound absorption.

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.701-708
• /
• 1997

Up to now, numerical methods such as Finite Element Method(FEM) or Boundary Element Method(BEM) have been widely used to find the optimized resonator's position during designing a car intake system. However, these methods are not useful at the first stage of car design since it is not easy to change a numerical model consist of a large mesh size. A software has been developed to cover the defects using 4-pole parameter method. The software is running at Windows 95 environment for a user's convenience. To show its usefulness, it is applied to a real automobile intake system.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.6
• /
• pp.5-12
• /
• 1995

In this paper, acoustic analysis of thermoacoustic refrigerating system was given and the design procedure meeting the specifications was presented. The thermoacoustic refrigerator transforms the sound wave energy into the thermal energy via adiabatic process of inert gas. The system is composed of mainly three parts ; the acoustic motor utilizing loudspeaker the stack of plate for thermal transport and the resonator to form the standing wave. Based upon the acoustic analysis, resonator dimension and stack position and size were decided, and the entire refrigerating system was designed to the given specification. Also the mechanical Impedance of the designed resonator was obtained by simulation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.129-134
• /
• 2010

A diesel engine is equipped with a turbocharger for providing more power at a low engine speed region by supplying charge air to combustion chambers. The turbocharger makes it possible to satisfy stringent emission regulations and customers' demand of enjoying the fun to drive by increasing engine performance. However, the turbocharger has the disadvantage of making BPF(Blade Passing Frequency), hissing, surge, whistle, and blow noises. Among them, reducing the blow noise, a narrow-band noise(a general range : 1800~2000Hz), is possible by using a resonator that controls the narrow frequency band governing the resonance in the intake system. In this study, the optimum location of the resonator is found by employing Boost as a CAE(Computer Aided Engineering) tool and is confirmed by experiments of an engine dynamo test and a real vehicle test.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.134-134
• /
• 2010

KBSI 부산센터에 건설중인 소형의 다중 양전하 중이온 가속기에 사용될 초전도 ECR 이온온은 최대 자기장 3 T, 최소 0.5 T의 자기 Mirror구조를 가지고 있으며 중심 부근의 1 T 자기장에서 28 GHz 전자공명에 의해 마이크로파의 에너지를 플라즈마로 전달한다. 최대 10 kW의 Gyrotron에서 TE02 모드로 발생하는 마이크로파는 모드변환기, 직류차단기 및 진공창을 통하여 플라즈마로 입사된다. 32.5 mm 지름의 원형 도파관에서 자기장 축방향으로 도입된 TE01 모드의 마이크로파를 Altar-Appleton-Hartree 분산관계식을 이용하여 군속도의 관점에서 살펴보았다. 플라즈마 밀도가 Cut-off에 근접하지 않는 한 마이크로파의 바깥 방향으로의 회절은 크지 않았으며, 전자공명 위치로 접근함에 따라 군속도의 방향이 바뀌어 오히려 중심 방향으로 향함을 알 수 있다. 즉 마이크로파가 플라즈마 챔버의 벽을 가열시킬 가능성은 크지 않은 것이다. 또한 뜨거운 전자 플라즈마의 Susceptibility를 이용하여 마이크로파의 플라즈마로의 전자 공명에 의한 흡수를 살펴본 결과, 운전 영역에 속하는 전자밀도가 제공되면 공명 지점에 이르기 전에 충분히 흡수되는 것을 확인하였으며, 이에 따라 챔버를 관통하여 인출부 벽에 충돌하는 마이크로파 에너지는 무시할 수 있을 것으로 보여진다. 이 결과들을 토대로 마이크로파 시스템을 설계 완료하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.242-243
• /
• 2009

배기토출음은 공회전시 발생하는 소음에 큰 영향을 끼친다. 연비를 높이기 위하여 공회전시 RPM을 낮추면 엔진 점화 주파수가 낮아지며, 이 경우 배기계 위치에 따른 음향학적 공명 주파수와 일치하면 배기 토출음의 크기가 증가한다. 따라서 본 연구에서는 공회전시 배기토출음을 줄이기 위해 소음기의 위치와 각 배기관들의 길이를 최적화하였다. 최적화 결과로써 3 가지 배기계 위치를 얻을 수 있었고, 실제 실험과의 비교를 통하여 최적화된 배기계 위치가 그렇지 않은 배기계 위치에 비하여 소음 저감량이 높은 것을 확인하였다.

• Applied Chemistry for Engineering
• /
• v.2 no.1
• /
• pp.1-11
• /
• 1991

Xenon-129 NMR technique has been developed since 1980 as a new method for the characterization of microporous materials such as zeolites, activated carbons and alumina by using chemical shift and linewidth variations in $^{129}Xe$ NMR of adsorbed xenon gas. This NMR technique has been known to be very effective to probe the locational and the chemical changes of the supported metallic species as well as the physicochemical change of the support material. Recently, this method has been successfully applied for the characterization of amorphous materials such as activated carbons, silica and alumina. Basic principles, experimental techniques and recent applications of the $^{129}Xe$ NMR method for the study of heterogeneous catalysts are introduced in this paper.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.133-137
• /
• 2012

Among various clean energy technologies, the solar energy technology has been widely used in various fields such as photovoltaic power generation and solar water/space heating. These days, special attention is drawn on its conversion into acoustic energy along with waste heat as a means to promote clean energy utilization. This work was carried out to investigate the possibility of converting solar energy into acoustic waves, especially, its performance characteristics for a single resonance tube (20.2 mm in ID). Variations are made for the stack length and its position as well as power supply. For a resonance tube of 200mm, an average sound pressure of 114.5 dB was measured with a stack length of 25.6mm at 5cm from the closed end. When the power supply was increased to 35W, an average sound pressure of 117.29 dB was detected with a frequency of 500Hz. There was an increase in frequency, 630 Hz (115.7dB), with a shorter resonance tube of 150mm.