• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.73-80
• /
• 2013

In this study, a numerical analysis based on CFD methods has been conducted to predict the aerodynamic coefficients and aerodynamic loads of KSLV-II configuration designed at the system design phase. By the effects of exclusion of engine cowls of prior configuration, axial force and normal force decreased and center of pressure was much moved to the nose direction. Also, aerodynamic loads at flight and on the launch pad were predicted for structural load analysis. The computed results will be used for mission analysis and structural analysis at the next design phase.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.60.1-60.1
• /
• 2011

본 연구에서는 풍력 터빈 블레이드의 다분야 통합 최적 설계를 위하여, 진동하는 비정상 공력하중에 의한 작동 수명을 고려한 최적화 과정을 수행하였다. 최적화 대상으로는 NREL의 1.5MW 급 풍력터빈을 baseline 으로 하였고, NREL의 FAST 프로그램을 이용하여 발전기의 정격 출력 및 블레이드에 작용하는 비정상 공력 하중 특성을 분석하였다. 최적화 수행 시 블레이드 형상의 효율적인 구현을 위해 형상모델링 함수를 이용하여 코드 길이와 트위스트 분포를 모델링하였다. 그리고 상용 MDO Framework 인 Piano를 이용하여 블레이드 루트부의 비정상 공력하중 조건을 완화시키는 최적화 설계를 수행하였다. 정격출력을 유지하면서도 Out of Plain 방향의 하중 조건을 개선하여 보다 긴 작동 수명을 기대할 수 있는 블레이드 형상을 설계하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.5
• /
• pp.391-398
• /
• 2016

This study focused on the aerodynamic loads of the horizontal axis wind turbine blade due to the normal turbulence inflow condition. Normal turbulence model (NTM) includes the variations of wind speed and direction, and it is characterized by turbulence intensity and standard deviation of flow fluctuation. IEC61400-1 recommends the fatigue analysis for the NTM and the normal wind profile (NWP) conditions. The aerodynamic loads are obtained at the blade hub and the low speed drive shaft for MW class horizontal axis wind turbine which is designed by using aerodynamically optimized procedure. The 6-components of aerodynamic loads are investigated between numerical results and load components analysis. From the calculated results the maximum amplitudes of oscillated thrust and torque for LSS with turbulent inflow condition are about 5~8 times larger than those with no turbulent inflow condition. It turns out that the aerodynamic load analysis with normal turbulence model is essential for structural design of the wind turbine blade.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.361-365
• /
• 2007

풍력 발전기의 블레이드 설계를 위하여 각 설계 변수에 대한 영향을 파악하기 위하여 연구를 수행하였다. 블레이드의 공력 형상을 결정짓는 설계 변수를 분류하고 이에 대하여 parametric study를 통하여 각 설계 변수가 주어진 환경에서 블레이드의 성능 및 하중에 어떠한 영향을 주는 가에 대하여 살펴보았다. 이를 블레이드의 성능 및 기준 하중에 대한 해석은 BEMT를 이용하였다. 본 결과는 블레이드의 실제 공력 설계에서 설계 변수의 선정과 그 영향에 대하여 미리 파악하는데 도움을 줄 것으로 기대된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.31-38
• /
• 2005

Aerodynamic influence coefficient linearly relates pressure with downwash in panel method for load analysis in which the viscosity of a flow is ignored and the compressibility cannot be taken into account in transonic region. Since the planform of an aerodynamic surface determines the coefficient, the panel method has a limit to the analysis of low Reynolds number flow. The accuracy of the pressure distribution can be improved by a direct correction to the pressure or a correction to the downwash, which is considered the change of camber or thickness, using the aerodynamic coefficients from wind tunnel test as constraints. A premultiplying correction method as well as a postmultiplying correction method is applied to a micro air vehicle to provide more accurate aerodynamic pressure for trim and load analyses. Theoretical aerodynamic pressure is obtained from the panel method. Correction factor matrix and correct pressure coefficient are computed for the conditions with two constraints in addition to single constraint. The postmultiplying correction method gives a better improvement in pressure distribution on micro air vehicle due to the flow characteristics on it.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.33.1-33.1
• /
• 2011

풍력발전기가 점차 대형화되어가는 추세에 따라 블레이드 역시 점차 길어지고 무거워지는 경향을 보이고 있다. 이는 블레이드뿐만 아니라 풍력발전기 시스템 전체의 하중 및 비용의 증가를 불러오게 되므로, 시스템의 성능 및 하중에 가장 큰 영향을 끼치는 블레이드의 공력특성에 대한 연구가 전 세계적으로 지속되고 있다. 그 중에서도 특히 작동 중 오염에 의한 블레이드 표면 거칠기 변화는 블레이드의 공력특성을 변화시켜, 발전기 전체의 성능뿐만 아니라 전체 하중에도 영향을 끼치는 주요 인자이다. 따라서 풍력발전기 블레이드 설계 시에 예측된 설계하중과 실제 운용 환경에 의해 변화된 운용하중 간의 차이를 예측할 수 있다면, 블레이드 설계 시에 표면 거칠기 변화에 따른 영향을 고려함으로써 실제 운용 환경에 맞는 최적의 블레이드 및 풍력발전기 시스템 설계를 수행할 수 있다. 본 연구에서는 블레이드의 표면 거칠기 변화에 따라 풍력발전기 하중이 어떻게 영향을 받는지에 대하여 분석하였다. 이를 위하여 표면 거칠기 민감도를 고려하지 않고 설계된 기준 블레이드와, 운용 중 표면 거칠기가 변화된 블레이드의 2개 모델에 대한 하중해석을 수행하고 그 결과를 비교하였다. 보다 실제적인 해석을 위해 Multi-MW 급 풍력발전기 시스템 모델을 대상으로 최적 설계된 블레이드를 기준 모델로 삼았다. 하중계산방법은 IEC 및 GL 2010 가이드라인을 참고하였으며, 일부 주요 극한하중 상황에 대하여 해석을 수행하여 설계하중상황(design load case, DLC) 별로 하중의 증감 및 경향을 비교하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.3
• /
• pp.1-9
• /
• 2017

Numerical computations are performed to investigate the effect of pintle stroke on the performance of an internal pintle thruster. Results show that the thrust control ratio was less than 2% and the aerodynamic load ratio was 22% as the pintle stroke increased. The flow past the nozzle throat rapidly expanding because of the shape of the pintle, and a shock wave was generated. Particularly, at the pintle stroke distance of 4 and 5 mm, the shock wave hit the wall of the nozzle, results in peeling bubbles. Depending on the altitude, the thrust increased and the aerodynamic load decreased, but the difference was as small as 1.5%. In the presence of the bore, the reduction of the pintle tip area resulted in a decrease in aerodynamic load.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.7
• /
• pp.469-478
• /
• 2019

Multirotor configurations such as VTOL and urban air mobility have been focused on today due to the high maneuverability. Aerodynamic and aeroacoustic characteristics of multirotor have much difference to those of a single rotor. In this study, a numerical analysis based on the free wake vortex lattice method is used for identifying the wake interaction effect. In order to compare the various configurations and operating conditions, the effects of the spacing between the rotors in hovering flight and the effects of the advancing ratio and the formation in forward flight are discussed. In the hovering flight, the unsteady loading of multirotor changes periodically and loading fluctuation increases as decreasing the spacing. It causes the variation in unsteady loading noise and the noise directivity pattern. In the forward flight, the difference in loading fluctuation and noise characteristics are observed according to the diamond and square formation of rotors. By comparing with results of single rotor analysis, multirotor configurations have different directivity pattern and amplitude of loading noise according to the location of each rotor. As a result, wake interaction effect becomes a highly important factor for aerodynamic and aeroacoustic analysis according to multirotor configurations and operating conditions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.83-91
• /
• 2005

This paper describes the structural strength test technique and the results for cylindrical supersonic vehicle subjected to both aerodynamic load and thermal load. The special positioning system using spring links was designed to float, support and restrain the test airframe during the test and the down-time. The hydraulic system and the electric heating system were utilized to apply the aerodynamic load and the thermal load to the test airframe together. Particularly, several hundreds of infrared quartz lamps were used for the heating system, and the thermal test conditions were successfully simulated. The test results showed that this kind of high temperature test is adequate to verify the structure integrity and produce useful engineering data which is necessary for the possible structural modification under thermal environments.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.4
• /
• pp.289-309
• /
• 2014

A rotor blade is an important device that converts kinetic energy of wind into mechanical energy. Rotor blades affect the power performance, energy conversion efficiency, and loading and dynamic stability of wind turbines. Therefore, considering the characteristics of a wind turbine system is important for achieving optimal blade design. This study examined the general blade design procedure for a wind turbine system and aero-structure design results for a 2-MW class wind turbine blade (KR40.1b). As suggested above, a rotor blade cannot be designed independently, because its ultimate and fatigue loads are highly dependent on system operating conditions. Thus, a reference 2-MW wind turbine system was also developed for the system integrated load calculations. All calculations were performed in accordance with IEC 61400-1 and the KR guidelines for wind turbines.