• Proceedings of the KIEE Conference
• /
• 2008.04b
• /
• pp.211-213
• /
• 2008

배전선로는 항상 각종 공작물과 아주 가까운 상태에서 존재하고 있어 배전선로 근접 작업 시 전력선에 근접으로 인한 섬락 또는 접촉으로 작업원이 감전 재해를 입을 수 있으며 또는 비, 바람, 조류 등에 의한 이물 접촉으로 설비 고장을 유발 시킬 수 있다. 이러한 감전재해 및 설비고장을 예방하기 위하여 22.9kV-y 전력선의 직선부분에 사용할 수 있는 직선형 방호관을 개발하여 건설현장 주변의 전력선에 방호조치 함으로서 전력선 근접 작업 시 작업종사자의 안전 확보에 이바지함은 물론 정전사고방지에도 크게 기여하여 왔다. 그러나 22.9kV-y 배전선로의 점퍼선부분과 변압기의 인상선 등 곡선으로 되었거나 구불구불한 형상으로 된 부위는 직선형 방호관으로는 방호조치가 불가능하여 산업안전보건법이 정한 산업안전기준에 관한 규칙 제327조 제2호에 의한 방호조치를 취하지 않고 근접작업이 진행되어 감전재해와 정전사고가 발생되어 왔었다. 한전에서 협력업체와 공동으로 연구개발한 소용돌이형 점퍼선방호관을 그동안 방호조치를 취하지 못한 점퍼선이나 구불구불한 전력선부위에 방호조치를 함으로서 감전재해의 예방과 정전사고 발생을 획기적으로 감소시킬 것으로 기대된다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.125-133
• /
• 1998

Nine tubes with trapezoidal integral-fins having fin densities from 748 to 1654fpm and 10,30 grooves and finned tubes with caves of 0.55 and 0.64mm height respectively are tested. A plain tube having same diameter as the finned tubes is also tested for comparison. In case of condensation CFC-11 condensates at saturation state of 32$^{\circ}C$ on the outside surface cooled by inside cooling water flows. And in case of boiling the refrigerant evaporates at a saturation state of 1bar on the outside tube surface and heat is supplied by hot water which circulates inside of the tube. The tube having fin density of 1299fpm and 30grooves has the best condensation overall heat transfer coefficient. However, as far as boiling heat transfer coefficient concerns, fin tubes with cave show higher value than low fin tube having fin density of 1299fpm and 30 grooves.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.377-381
• /
• 2011

지구는 지속적으로 변화하는 동력학적 시스템이며, 지표면 형상 및 지구 내부의 질량분포도 계속 변화하고 있다. 지구시스템의 질량재분배 과정에서 발생되는 밀도 차이는 중력장의 미세한 변이를 초래한다. 미 항공우주센터(NASA)와 독일 국립 항공우주연구센터(DLR)에서 공동으로 개발한 GRACE (Gravity Recovery And Climate Experiment) 인공위성은 지구의 중력장을 측정하는 위성으로, 2002년부터 현재까지 9년 동안 활동해왔다. 본 연구에서는 한반도(북위 $37.5^{\circ}\sim41.5^{\circ}$, 동경 $125.5^{\circ}\sim130.5^{\circ}$)의 월평균 수자원변화량(TWSC: Terrestrial Water Storage Change)을 산정하기 위해 미국 텍사스대학교 공간연구센터(CSR)에서 가우시안 필터링을 통해 구면조화함수의 계수 형태로 제공된 총 94개월(2002 년 8월~2010년 6월)의 자료(Level-2)를 이용하였다. Level-2 자료는 해양조석, 고체지구조석 및 지구자전으로 인한 극조석 등 조석의 영향과 대기와 해양의 변동성으로 인한 비조석 영향을 보정한 것이다. 이렇게 산정한 TWSC를 수자원관리정보시스템(WAMIS)과 전지구지표동계화시스템(GLDAS)을 통해 제공되는 자료와 비교 분석하였다. 본 연구를 통해 GRACE 중력장 자료가 수자원총량의 산정과 검증을 위한 대안으로 활용될 수 있음과, 수문요소의 불확실성을 낮출 수 있는 새로운 수문자료로의 활용 가능성을 확인하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.4
• /
• pp.48-56
• /
• 2011

A Possibility of combustion instability on longitudinal mode has a high level at large scale of L/D. Solid propellant has a metal particle and a grain of control to pressure oscillation. Solid rocket motor in slotted-tube grain controls pressure oscillation of longitudinal mode. Slotted-tube grain restrains longitudinal 1st pressure oscillation. But cavity volume of aft. insulation ablation amplifies 2nd pressure o scillation by vortext shedding. A study has suppressed combustion instability and vortex shedding by modified 4 slotted tube solid rocket motor design.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.3
• /
• pp.9-14
• /
• 2013

Combustion tests were conducted for a hydrogen-fueled Mach 5 scramjet engine model using a blow-down facility. No fuel and two fuel flow rate cases were tested for two different model configurations. Time history of the wall static pressures inside the model and their time-averaged spatial distribution were used for the analysis of the flow and combustion characteristics. For shorter model, supersonic combustion was occurred for both of the fuel flow rate cases. For longer model, supersonic combustion was occurred for less fuel case, whereas thermal choking and subsonic combustion were occurred for more fuel case. Intake started even for this subsonic combustion case.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.1
• /
• pp.29-38
• /
• 2007

In order to analyze the performance comparison of dish solar collector with mirror arrays and receiver shapes, the radiative heat flux distribution inside the cavity receiver is numerically investigated. The solar irradiation reflected by dish solar collector is traced using the Monte-Carlo method. Five different dish solar collectors and three different cavity receivers are considered. A parabolic-shaped perfect mirror of which diameter is 1.5 m is considered as a reference dish solar collector and four different arrays of twelve identical parabolic-shaped mirror facets of which diameter are 0.4 m are used. Their reflecting areas, which are $1.5\;m^2$, are the same. Three different cavity receiver shapes are dome, conical, and cylindrical. In addition, the radiative properties of the concentrating surfaces can vary the thermal performance of the cavity receiver so that variation of the surface reflectivity of each mirror is considered. Based on the calculation, the design information of dish solar collector for producing the electric power can be obtained. The results show that the dome type has the best performance in receiver shapes and the 2AND4 INLINE has the best performance in mirror arrays except perfect mirror.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.367-370
• /
• 2005

This paper investigated the sound characteristics in an apartment complex. The field measurement was conducted in order to examine the acoustical characteristics of the apartment complex in situ. As a result, it shows that there are around 3 sec. reverberation time and the additional sound reinforcements at the area of high height due to the surrounded buildings. Thus, 1:50 Scale model measurement and Raynoise computer simulation were carried out with insertion of the parapet and the canopy on the balcony. In case of a single building, the parapet was effective to reduce noise level at low floor levels, and the canopy was effective to reduce noise level at high floor levels. But it also shows that both the parapet and the canopy were not effective to reduce noise level at middle floor levels. In case of an apartment complex, the canopy was less effective to reduce noise level at each floor in comparison with case of the single building.

• Journal of the Korean Society of Visualization
• /
• v.21 no.1
• /
• pp.94-102
• /
• 2023

Three design parameters were considered in this study: outlet nozzle angle (30°, 60°, 80°), neck length (1 mm, 3 mm), and flow rate (0.5, 0.6, 0.7, 0.8 lpm). A neck diameter of 0.5 mm induced cavitation flow at a venture nozzle. A secondary transparent chamber was connected after ejection to increase bubble duration and shape visibility. The bubble size was estimated using a Gaussian kernel function to identify bubbles in the acquired images. Data on bubble size were used to obtain Sauter's mean diameter and probability density function to obtain specific bubble state conditions. The degree of bubble generation according to the bubble size was compared for each design variable. The bubble diameter increased as the flow rate increased. The frequency of bubble generation was highest around 20 ㎛. With the same neck length, the smaller the CV number, the larger the average bubble diameter. It is possible to increase the generation frequency of smaller bubbles by the cavitation method by changing the magnification angle and length of the neck. However, if the flow rate is too large, the average bubble diameter tends to increase, so an appropriate flow rate should be selected.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.76-79
• /
• 2011

천리안 위성은 우리나라 최초의 정지궤도 복합 지구관측 위성으로 기상관측, 해양관측과 통신서비스 임무를 수행하는 중대형위성으로 2011년 6월 27일에 성공적으로 발사되어 약 6개월간의 시험운영기간을 거쳐 현재는 실시간 서비스를 제공하고 있다. 천리안 위성은 한국항공우주연구원(KARI) 총괄 주관하에 2003년 9월 개발을 시작으로 프랑스의 EADS-Astrium과 공동 개발되었다. 천리안 위성은 이미 EADS-Astrium에 의해 통신 위성 본체 플랫폼으로 우주 인증된 Eurostar3000(이하 E3000) 플랫폼을 근간으로 제작되었다. 본 논문에서는 천리안 위성 플랫폼 탑재컴퓨터에 탑재되어 위성체 전반을 운영하는 비행소프트웨어의 구성 및 기능에 대해 기술한다. 또한 기존의 EADS-Astrium사의 E3000 비행소프트웨어 생산라인을 바탕으로 천리안 위성 비행소프트웨어를 개발하기 위한 개발 절차 형상을 소개한다. 본 논문에서 기술한 재생산을 위한 개발 절차에 대한 접근 방법은 위성 임베디드 소프트웨어 시스템과 같은 mission critical 시스템이면서 이미 검증된 소프트웨어를 재사용하고 사용자의 요구사항을 만족시키기 위해 일부 기능을 변경 및 추가 개발하여 통합된 소프트웨어를 생산해야하는 소프트웨어 개발체계의 실질적인 한 예를 보여주고 있다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.235-253
• /
• 2018

Groundwater flow induced by cracks in a buried pipe causes ground loss in the vicinity of it which can lead to underground cavities and sinkhole problems. In this study, the ground collapse mechanism and the failure mode based on an aperture in the pipe located in cohesionless ground were investigated through a series of physical model studies. As the influence parameters, size of the crack, flow velocity in the pipe, groundwater level, ground cover depth and ground composition were adopted in order to examine how each of the parameters affected the behavior of the ground collapse. Influence of every experimental condition was evaluated by the final shape of ground failure (failure mode) and the amount of ground loss. According to the results, the failure mode appeared to be a 'Y' shape which featured a discontinuous change of the angle of erosion when a groundwater level was equal to the height of the ground depth. While in the case of a water table getting higher than the level of ground cover depth, the shape of the failure mode turned to be a 'V' shape that had a constant erosion angle. As the height of the ground depth increased, it was revealed that a mechanism where a vertically collapsed area which consisted of a width proportional to the ground height and a constant length occurred was repeated.