• Journal of Families and Better Life
• /
• v.22 no.5
• /
• pp.59-73
• /
• 2004

Since 1980s' Korea had a great change on the housing culture by the supply of multi-family housing stock both on the macro-social and micro-social aspects. The purpose of this study was to examine the changes and the characteristics of housing environments which were estimated its modernization, and to examine the personal life under the change of housing environments. So I would like to revaluation the characteristics of modernization between the 1980s' and 1990s'. Therefore references were made to various papers, reports, the statistical data, newspaper reports, advertisements and magazines during that period. As a result, this paper came to the remarks as follows: 1. The success of modernization on the housing environments since 1980s' was the Quantitative growth of housing supply by multi-family housing. In spite of this, the Quantitative growth of housing supply and the improvement in Quality like housing space per person had the characters which was 'out of valence on the division'. 2. The Qualitative improvement of modem housing life by the development of housing industries could be said the improvement owing to develop of facilities and equipments. The introduction of up-to-date facilities and equipments realized the convenience and the rationality of living in the house. Although the improvement on the physical things deteriorated the modernized spaces to uniform things by commercial strategies. 3. The life in the multi-family housing which gives protection to personal privacy was settle down on the extremely individualized life without common things within the neighbors. Multi-family housing which was a production of process of modernization came true the growth in an appearance and the variety in the inside, but for the aspect of residents' everyday life in the multi-family housing, the Korean traditional relationship was collapsed and a sense of incompatibility within the residents was created.

• Journal of Environmental Science International
• /
• v.29 no.5
• /
• pp.507-517
• /
• 2020

New towns and large multi-family housing complexes are being built in the capital region of Korea, with the goal of creating safe and pedestrian-friendly cities. Traffic accidents in such residential complexes, however, is on the rise, creating social problems. While there have been many previous studies on problems with pedestrian environment; there is a dearth of studies that take design-based approach to ensure safety in pedestrian environment within residential complexes. Therefore, this study aims to prevent traffic accidents by properly planning pedestrian environment within multi-family housing complexes, in addition to emphasizing theories related to planning safer pedestrian environment in general. This study found the following design directions required to improve the design theory of pedestrian safety in multi-family housing complexes: (1) Linking traffic facilities and residential complex spaces in Korea; (2) Considering implementation of United Kingdom road systems; (3) Establishing appropriate objectives for each residential complex based on case study. In response to these findings, the study selected the A84BL complex in Hwaseong Dongtan 2 Complex located in Dongtan-myeon, Hwaseong-si in Gyeonggi Province, Korea. Items that can be implemented, as well as spatial design directions, were discussed with a focus on private vehicles, pedestrians, and service vehicles.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.3
• /
• pp.277-283
• /
• 2018

This study is conducted to improve the manufacturing process of the modular construction method, which is a pre-fabricated construction method recognized for its advantage on the shortening of construction time. This study first identified the factors that result in shortening of pre-fabrication processes in the current module-processing factory. In addition, those identified factors were further considered for installing the M.E.P. system that is being outsourced on the main module in the production line. A manufacturing process of the construction modules, which considers installation of a M.E.P. system most suitable for shortening the time on the outsourcing of modular construction, is introduced throughout the research. Furthermore, this study suggests the factors in need of improvement during design phase of modular construction and improvement measures to consider the quality of unit modules by focusing on the module parts that are most exposed to defects.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.2 s.18
• /
• pp.55-63
• /
• 2004

A building structures was used the facility management phase through $planing\cdotdesign\cdotconstruction$. phase. building's length of life was shorter than its physical length of life, because of the lack of law and institution, the lack of related agencies' preparation and owner's preparation. Also, considering the construction life-cycle, the facility phase accounted for $70\%$ of whole official lift, therefore, it needed to be opposed to systemic facility management. Current facility management system practically managed the defect of facility and almost never communicated between the other phase. In the side of policy, domestic law, institution, and policy related to building structure focused built-up market. and then the management of existing facilities was not consolidated efficiently. The purpose of this study was to suggest the direction of facility management construction for managing, utilizing, and operating public facilities, moreover, to study the direction of current facility management system improvement corresponding to total computer integrated construction system under government agencies.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.431-435
• /
• 2007

Green Building Certification Program, which was first introduced to residential buildings in Korea in 2002, has been put on track. This program is expected to bring about the effect in the economic viewpoint that was based on a life-cycle-cost analysis, not to mention the environmental viewpoint. However, given the fact that the existing model for feasibility analysis focusing on early investment cost can hardly be applicable to the green buildings because of lacking the life-cycle-cost reduction factor, it remains still difficult to conduct an objective evaluation. The study thus was intended to identify the factors that should be additionally considered in conducting the feasibility study to be implemented through the analysis of the certification items of green buildings as a preliminary study in structuring the evaluation model for feasibility analysis of green buildings.

• KIEAE Journal
• /
• v.5 no.3
• /
• pp.41-48
• /
• 2005

Before occupation of an apartment housing, the builders are required to inform the test result of IAQ to the public. However, there is no simplified method to predict IAQ before measurement of pollutant concentration. In this study, a simplified way of predicting IAQ based on the distribution of indoor pollutant concentration is proposed. 7 different cases of air change rate have been simulated through CFD analysis to get the distribution ratio of each pollutant material and then simplified functions were used with CRIAQ1 values derived from CFD simulation to evaluate by comparing the influence of each material in the indoor pollutant concentration. Again, a lot of efforts which can improve the indoor air quality have been performed. Materials used in indoor space are labeled with their pollutant emission level. Installation of ventilation system in residential buildings will be regulated by a building codes sooner or later. But it is important to understand the fact that layout of walls, location or size of openings will influence the indoor air flow and pollutant concentration. And location of emitting material influences to indoor air pollutants distribution. But until now there is few recognition and consideration of these factors. Therefore, in this paper the effects of these factors is proved and some kind of guideline is made for designers after a comparison of typical apartment floor plan and a new type plan with their average pollutant concentration and its distribution of each room. CFD(Computational Fluid Dynamics) program was used to show the indoor air flow and pollutant concentration distribution. For this purpose, a typical $100m^2$ apartment floor plan was chosen as a case study model and several alternatives were reviewed to improve the IAQ performance. The simulation took place in the condition of natural ventilation through windows.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.187-194
• /
• 2010

Heavy-weight floor impact sound insulation performance criteria have been effective in Korea since the regulation which enforces the standard thickness of slabs in domestic apartment houses should be constructed by 180mm or 210mm was adopted. But every slab does not satisfy this criteria. So, review on existing floor impact sound insulation performance is needed to propose some basic materials for the revision of rating method. To achieve this goal, 63 field test data were checked and analyzed. The results of this study are as follows ; 1) The 210mm thickness slab has the characteristics of deeper level decrease above 120Hz frequency band than that of 180mm thickness slab's. 2) 27.5% of 180mm thickness slabs were satisfied the floor impact sound insulation performance criteria, whereas 65% of 210mm slabs do. 3) Among the main contribution frequency bands for the determination of single rating index, 63Hz was shown as the most contributive band in 210mm slabs. 4) In comparison of single rating index between bang machine test and ball test. there is a big difference between the two and this phenomenon is frequent in 210mm slab results. 5) Rating Methods for the analysis of cross-correlation between the amount of rating, the usefulness of the arithmetic mean could be secured.

• Journal of Environmental Health Sciences
• /
• v.33 no.1 s.94
• /
• pp.1-10
• /
• 2007

This study accomplished to grasp the present condition of HAPs and to examine efficiently carcinogenic and non-carcinogenic health effects through health risk assessment in new apartments from June, 2004 to May,2005. Moreover, we performed uncertainty analysis by Monte-Carlo analysis to control uncertainty of exposure factors. The major results obtained from this study were as follows. Firstly, cancer risk of formaldehyde for male was $1.67{\times}10^{-5}$ in CTE in point estimation. Cancer risk of formaldehyde was showed $2.94{\times}10^{-3}$ in RME that applied worst case used results of 95 percentile in point estimation. It exceeds $10^{-6}$ of guide line in US EPA. Moreover, cancer risks of formaldehyde for female were $3.98{\times}10^{-5}$ in CTE and $3.93{\times}10^{-3}$ RME. Secondly, every hazard index for non-carcinogenic pollutants was less than 1 of permitted standards in CTE. However, in RME of male, hazard indexes of 1,2-Dichloropropane and Toluene were 1.3 and 2.0, respectively. Hazard indexes of 1,2-Dichloropropane and Totuene for female in RME were 1.7 and 2.6, respectively.

• Korean Institute of Interior Design Journal
• /
• v.24 no.5
• /
• pp.117-127
• /
• 2015

This paper depicts a case study of the BIM (Building Information Modeling)-enabled evaluation of design alternatives for an actual remodeling project in Yeongwol, Korea. The increase of urban population and income followed by the growth of economy has derived massive supply of grand scale housing project in Korea since 1970s. Consequently, building remodeling became one of the feasible resolutions for renovating such old housings in these days. This paper aims to introduce a technical approach to such remodeling projects based on BIM-enabled applications focusing on quantitative analysis of design alternatives. Among the technical issues of such building remodeling projects, this paper focuses on the BIM-enabled area analysis and comparison between design alternatives to support decision-making even in early phase of remodeling design process. BIM and its variety of applications have broadly influenced the domain of AEC-FM (Architecture, Engineering, Construction, and Facility Management) within the lifecycle of buildings. As one of the applications facilitated by BIM, the automated area calculation and scenario-based comparison between alternatives can play an important role in the early phase of remodeling project. We modeled three design alternatives (buildings) and three housing modules (units) based on the actual case in Yeongwol city, Korea using a BIM design authoring tool. Nine combinatorial BIM models were demonstrated for the BIM-enabled review process described in this paper. To determine the most optimal design scenario among nine alternatives, this paper demonstrates a result of the conducted spatial program review. The main subject includes specific spatial program issues on; 1) the number of unit spaces; and 2) area of individual/grouped and private/shared spaces.

• Journal of the Korean association of regional geographers
• /
• v.14 no.5
• /
• pp.466-479
• /
• 2008

This study focuses on the characteristic of community making in urban areas and the implications in the case of Samduck-Dong, Daegu City. This study observed the geographic feature of Samduck-Dong, the background and process of community making and the citizen's interests and respondence. Samduck-Dong is located near CBD of Daegu and surrounded by useful places and facilities. This area is perceived as an attractive housing environment. As the commercial function is increased and the studio type house for rent, so called one room, is constructed, it is anticipated to get some trouble of building up community. The program of community making in Samduck-Dong, started from wall removal, is attempted diversly now. The places in relation to community making became a representative character of Samduck-Dong. However, there is problems of citizen's participation and the appreciation sharing about the contents and scale of community making.