• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.399-401
• /
• 2018

몇 년 사이에 IoT는 통신 프로토콜과 디바이스 중심의 단순한 개념에서 점점 진화 하여, 디바이스, 인터넷기술, 그리고 사람(사물, 데이터 등)이 보안, 프라이버시, 신뢰도 문제를 해결하는 것까지 포함한 비즈니스 혁신, 재현성, 상호 운용성을 위한 완전한 생태계를 창조하는 것으로 개념이 바뀌어 가고 있다. IERC는 실제와 가상의 사물들이 고유특성과 물리적 가상적 특성을 가지고 있고, 지능형 인터페이스를 사용하며, 끊김없이 정보네트워크를 통합 하는 표준과 상호운용 통신 프로토콜을 기반으로 자기 스스로 재구성이 가능한 동적인 글로벌 네트워크 인프라로 정의함으로써 IoT의 범위를 인프라까지 확대 정의하고 있는 추세이다. 이와 같은 IoT 영역이 확대되면서, 일반적으로 IoT의 4대 기술 분야를 센싱기술, 유 무선 통신 네트워크 기술, 플랫폼 기술 및 서비스 기술로 분류하고 있으며, 이 중에서 다양한 전파서비스를 제공하기 위해서는 무선통신망 구축이 필수이며, 이를 실현하기 위해서는 주파수 자원 확보가 매우 중요하다. 본고에서는 이를 실현화 시킬 수 있는 동북아지역 IoT주파수 동향 및 표준화에 대하여 결과를 제시하고자 한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.135-145
• /
• 2005

Geotechnical design routinely requires that in-situ strength, stiffness of the ground be determined. In the working stress conditions, the strain level in a ground experienced by existing structures and during construction is less than about 0.1%~1%. In order to analyze the deformational behavior accurately, the in-situ testing technique which provides the reliable deformational characteristics at small strains, needs to be developed. Cone pressuremeter tests were performed on the western off-shore region of korea, and analyzed using cavity expansion theory and curve fitting technique to obtain the shear modulus at small strain level of $10^{-1}%$. The value of $E_u/S_u$ ratio for the marine clay shows about 589 at the small strain. However the value of $E_u/S_u$ estimated by lab tests are much smaller values ranged from 81 to 91. It is indicated that the curve fitting technique from CPM tests results can be used to obtain the shear modulus at small strain.

• Journal of Radiation Protection and Research
• /
• v.13 no.2
• /
• pp.21-28
• /
• 1988

Absorbed dose in water was analyzed by Burlin's general cavity theory for medium X-ray energy region (HVL : 0.29, 0.84, 1.60, 2.62mm Cu) using LiF : PTFE TL dosimeter(0.4 mm ${\times}\;{\phi}$ 12.5mm, hot-pressed LiF TLD-700) which was enclosed in lucite capsule. The absorbed dose rate at 5cm depth in water phantom was determined with measurement error of ${\pm}5%$. This result was compared to that of the ionization method, indirectly absolute measurement method, of which measurement error of ${\pm}2%$. The difference between these two results lies within measurement error of LiF : PTFE method. Therefore, the absorbed dose in water obtained by LiF: PTFE is reliable, and this result suggests the base to estimate dose-equivalent for medium X-rays.

• Journal of Korean Home Economics Education Association
• /
• v.35 no.2
• /
• pp.111-132
• /
• 2023

The objective of this research is to conceptualize care competences for adolescents and to develop a valid measurement tool based on this conceptualization. The primary aim is to establish a solid foundation for effective communication in teaching care competences within the domain of home economics education. To achieve this, a comprehensive review of relevant literature and previous studies was conducted, and consultations with experts were undertaken to assess content and criterion-related validity. Furthermore, exploratory and confirmatory factor analyses were performed. The findings from these analyses resulted in a set of 34 items, which were categorized into five distinctive factors representing care competences in adolescents. These factors encompassed four items of care thinking, seven items of care emotion, six items of care behavior, seven items of self-care and ten items of community-care. Additionally, a reliability analysis was performed on the model, confirming the stability and consistency of the five factor structure and the 34 item scale, which assess care competences in adolescents.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.1
• /
• pp.1-14
• /
• 2010

Until now, the evaluation method of spalling depth using Martin et al. (1999)'s linear regression relations has long been known applicable. However, it is not likely that the proposed equation is applicable to the openings other than circular type and mostly overpredict the spalling depth in comparison with actual spalling cases. Moreover, the evaluation method to estimate the spalling width has not been presented yet; it is essential to evaluate the spalling width in addition to the spalling depth, because the shape of the spalled region influences the choice of suitable rock reinforcement. In this study, linear regression equations, in which normalized spalling depth ($d_f/W_D$) and normalized spalling width ($w_f/W_D$) are functions of three spalling evaluation indices, ${\sigma}_1/{\sigma}_c,\;D_{is}(={\sigma}_{max}/{\sigma}_c)$ and ${\sigma}_{dev}/{\sigma}_{cm}$, are established based on in-situ spalling observations and CWFS simulation results. Confidence intervals of 95% using the statistical inference theory are used in verifying the reliability of linear regression equations. Spalling depth ($d_f$) and spalling width ($w_f$) predicted from the proposed linear regression relations, which take three spalling evaluation indices into account, showed reasonable match with in-situ observations by adopting weighting factors considering the degree of variance of linear regression relations.

• Journal of Korean Home Economics Education Association
• /
• v.25 no.2
• /
• pp.21-47
• /
• 2013

The purpose of this study is to examine the previous literature in home economics and contents and achievement standards of 2009 revised curruculum in relation to character education. To achieve this purpose 1) the literature review in human development and family, self-management and consumption life, food, clothing, and housing life area is critically discussed in relation to character education, and 2) curriculum contents and achievement standards are analysed in relation to the six pillars(trustworthiness, respect, responsibility, fairness, caring, and citizenship) of character education proposed by Josephson Institute. The results of analysis are verified by five experts in home economics content areas. Specific results of relation between home economics contents/achievement standards and six elements of character education are as follows. Human development and family area is most closely related with all elements of character education among other content areas. In Self-management and consumption life areas, self-management sub-area is very closely related with responsibility element; and consumption life sub-area is very closely related with citizenship element. In food area, health diet and eating sub-area is very closely related with trustworthiness, respect, and responsibility elements; and eco-frendly diet and food sub-area is very closely related with all six elements. In clothing area, clothing and self-expression sub-area is very closely related with trustworthiness, caring, and citizenship elements; and eco-friendly clothing and clothing reform sub-area is very closely related with responsibility, caring, and citizenship elements. In hosing area, housing and living environment sub-area is very closely related with responsibility and caring elements; and sustainable living and decorating living space sub-area is very closed related with trustworthiness, fairness, and citizenship elements.

• Tunnel and Underground Space
• /
• v.19 no.1
• /
• pp.19-30
• /
• 2009

For the purpose of determining the thickness of concrete lining and detect of the cavity where may be located behind tunnel lining, IE (Impact-Echo) method it effectively useful in the tunnel safety diagnosis and the quality control during the construction. As a part of case study, we applied IE method to various tunnel structure types such as road tunnel and subway tunnel constructed by NATM (New Austrian Tunnelling Method) and ASSM (American Steel Support Method). As tunnel specifications estimated from this method were compared with coring data, design drawing and other survey results, it was very good agreement with each other. In conclusion, we verified that IE method shows an accurate and reliable result. The conventional interpretation of IE method in frequency domain gives only vertical information at a certain point. However, the interpretation using time-frequency analysis and depth section imaging technique from two dimensional profiling surveys can show more reliable information about structure inside.

• The Korean Journal of Applied Statistics
• /
• v.1 no.2
• /
• pp.82-90
• /
• 1987

모든 과학기술지식은 객관성을 지닌 관찰과 실험과 측정에 의해서 이루어진다. 이렇게함으로써 과학기술지식은 재현성과 영구성을 가져오게 되며, 올바른 전승과 누적적 발전을 가져오는데 이 과학기술지식의 질서체계를 유지하는데 근본적인 역할을 하는 것이 표준이다. 시간, 길이, 온도, 무게 등의 기본 측정단위와 광속, 중력 등의 물리화학적 상수, 법정계량단위, 각종 공업 규격, 안정 규정 등 수 없이 많은 표준은 효과적인 공동 인식과 객관적 판단의 기준으로 활용되고 있다. 현대의 과학기술이 다양하게 발전하고 이에 따라 우리의 생활도 더욱 복잡한 구조를 이루면서 표준에 대한 필요성도 더욱 높아가고 있다. 표준에 대한 깊은 생각없이도 우리는 자동차에 주유할때 표준단위를 통해 원하는 분량을 말하며, 카메라의 필름 종류를 선택할 때도 국제표준기구(ISO: International Standards Organization)의 규격을 사용하는데 익숙해져 있다. 이렇게 표준은 우리 일상생활과 밀접한 관계에 있으나 소비자 입장에서는 그 가치를 절실히 느끼지 못한 것이 사실이며 표준이 없음으로 해서 일어나는 불편과 혼란에 대해서는 무관심한 것이 사실이다. 일상생활에서 일어나는 표준의 역할을 우리가 잘 이해한다면 표준이 왜 필요한가를 쉽게 인식하게 될 것이다. 최근 정보산업이 새로운 물결로 사회전반에 영향을 미치고 있으며 이에 따라 정보의 수집, 가공, 저장 및 배포의 처리 과정에서도 제반 표준화의 필요성이 크게 대두되었다. 그 결과로 최근 10여년간에 수백종의 기술기준, 지침서 및 기본/기능 표준규격이 제정되어 왔다. 이와 같이 어떤 특별한 영역에서의 표준에 대한 요구가 있을 때 관련 규격이 제정되게 된다. 표준의 제정을 위한 다음 단계는 그 주제에 관한 표준(또는 규격)개발에 관심을 가진 사람들이 모이는 일일 것이다. 통계분야에서도 몇가지 표준화 활동이 ISO 를 중심으로 진행되고 있다. 예를 들면 실험과 검증 결과의 표현과 해석, 표본추출 방법 등에 관한 것으로 이들은 통계의 응용분야에서 꼭 필요한 표준이다. 구체적인 예로서 우리나라 국민의 표준체위값을 설정하기 위하여 측정조사할 때 측정방법 뿐 아니라 표본추출 방법과 통계자료 처리과정의 표준화가 이루어 지지 않는다면 각 기관에서 조사 발표하는 체위관계 자료가 상이하여 국가기관의 통계자료에 대한 신뢰성이 저하되고 통계값을 이용하여 의류, 신발 등의 제품을 제조하는 산업계에 혼란을 야기시킬 수 있다. 본 고에서는 ISO의 활동을 정보처리 분야에 초점을 맞춰 간략하게 설명하고 통계분야의 국제 활동을 비전문가인 필자들이 아는대로 소개하는 한편 국내활동의 필요성을 강조하여 관련 기관, 학계 및 산업계 관련전문가들의 ISO 국내활동 참여를 제의하고자 한다.

• Geotechnical Engineering
• /
• v.13 no.4
• /
• pp.85-94
• /
• 1997

The design and construction of underground structures contain many substantial mincer dainties. A reasonable estimation of geotechnical parameters is of paramount importance and must be one of the most difficult tasks in designing and constructing underground structures. If the plastic zone exists by tunnel excavation, the ground response may also be dependent on the yield criterion mainly composed of strength parameters. In order to estimate unknown model parameters from the in-situ measurements as well as prior estimates for designing tunnels which have plastic zones, the Extended Bayesian Method(EBM) is adopted : an elasto-plastic finite element program is linked to the EBM as a mathematical model to predict the ground response. Mohr-Coulomb failure criterion is used to represent the plastic behavior. A hypothetical underground site, where the ground behaves elasto-plastically, is adopted to demonstrate the validity of the proposed feedback system.

• Spatial Information Research
• /
• v.22 no.5
• /
• pp.77-85
• /
• 2014

As In spite of a close relationship between the land and the building administration, the registration information have been managed separately, because of the different department and the different working area as a national office. To record and manage the exact location of the building within the land we should oblige to submit a status survey results and also register them on the cadastral map. Even now we should make a business cooperation system by building a co-construction of information. The purposes of this study are to suggest ways to improve the legal system for the exact registration of a building on the cadastral map and to look for ways to increase the confidence of building information by reducing the inconvenience of the people through the analysis of a current building administration.