• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.216-224
• /
• 2014

층간소음의 대부분의 원인이 아이들 뛰거나 발걸음으로 나타나고 있어 층간소음 저감을 위한 선행 연구로 층간소음의 주요 충격원인 보행 행위에 대한 정밀한 연구가 필요하다. 성인 보행 충격력과 그에 따른 바닥충격음을 계측하여 보행하중이 바닥충격음에 영향을 주는 요소를 분석하였다. 보행하중 중 발 뒤꿈치 충격력은 전체 충격하중을 주파수 특성을 대변할 수 있는 임펄스 형태의 하중으로 충격력은 뱅머신 또는 고무공보다 낮지만 1 차 영점(First zero)이 80Hz 정도로 높아 유효 가진 주파수 대역이 표준 중량충격원 보다 높았다. 구조물과 수음실의 고유모드 특성으로 인해 외부 충격에 대한 구조체 진동 및 음압의 공진 현상이 발생되기 때문에 공진 성분이 포함되는 바닥충격음 레벨은 순수 충격력 특성인 보행 또는 표준 중량충격원의 옥타브 밴드 충격력 폭로레벨과는 전혀 다른 주파수 특성을 나타내었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2004.11a
• /
• pp.21-25
• /
• 2004

최근 IT를 포함한 모든 산업 및 기술 영역에서는 포준화 활동을 기반으로 하여 융복합화(Convergence) 현상이 두드러지고 있다. 이는 또한 e-Learning 산업 및 기술에서도 큰 화두이다. 현재 e-Learning 표준화에서 시장에서 주도권을 행사하고 있는 것은 ADL의 SCORM 규격이다. 데이터방송 영역에서는, 북미에서 지상파와 케이블 TV간 콘텐츠 호환성 확보를 위해 ATSC와 케이블랩(CableLabs)이 공동 연구 중인 ACAP을 통해서 지상파-케이블 공통 표준화가 진행중이다. 이에 본 논문은 3-Learning 산업 및 기술에서의 융복합화의 일 영역으로 그리고 방송통신융합서비스의 일환으로 인터넷 기반 학습 환경과 TV 기반 학습 환경에서의 학습 콘텐츠 ( 및 코스웨어) 상호운용성에 대해 연구하였다. 이를 위하여 인터넷 기반의 e-Learning의 사실상의 표준으로 받아들여지고 있는 SCORM 규격과 DTV 환경 기반의 데이터방송 지상파-케이블 공통 규격인 ACAP간의 상호운용 API 개발을 통하여, SCORM 규격과 ACAP 규격의 상호운용성을 가능하게 하는 학습 콘텐츠 및 T-Learning 운용환경을 연구$\cdot$개발하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.3
• /
• pp.9-14
• /
• 2013

Combustion tests were conducted for a hydrogen-fueled Mach 5 scramjet engine model using a blow-down facility. No fuel and two fuel flow rate cases were tested for two different model configurations. Time history of the wall static pressures inside the model and their time-averaged spatial distribution were used for the analysis of the flow and combustion characteristics. For shorter model, supersonic combustion was occurred for both of the fuel flow rate cases. For longer model, supersonic combustion was occurred for less fuel case, whereas thermal choking and subsonic combustion were occurred for more fuel case. Intake started even for this subsonic combustion case.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.583-586
• /
• 2008

As We experienced the onrush of industrialization, unplanned cities that had been grown rapidly are declining. The Urban Redevelopment is an alternative which is physical and functional improvement of declined cities. It has many types of undertaking by related law in Korea. But this undertaking has a problem. Whole designated district is separated several zones. And these zones are managed individually Therefore it has a difficulty to achieve overall goal of the urban redevelopment. The Urban Redevelopment should be managed over all. So we suggest application possibility of Program Management in Urban Redevelopment.

• KSBB Journal
• /
• v.26 no.2
• /
• pp.131-138
• /
• 2011

Some computational approaches are needed for clarifying RNAi sequences, because it takes much time and endeavor that almost of RNAi sequences are verified by experimental data. Incorrectness of RNAi mechanism and other unaware factors in organism system are frequently faced with questions regarding potential use of RNAi as therapeutic applications. Our massive parallelized pair alignment scoring between dsRNA in Genebank and expressed sequence tags (ESTs) in Caenorhabditis elegans Genome Sequencing Projects revealed that this provides a useful tool for the prediction of RNAi induced cosuppression details for practical use. This pair alignment scoring method using high performance computing exhibited some possibility that numerous unwanted gene silencing and cosuppression exist even at high matching scores each other. The classifying the relative higher matching score of them based on GO (Gene Ontology) system could present mapping dsRNA of C. elegans and functional roles in an applied system. Our prediction also exhibited that more than 78% of the predicted co-suppressible genes are located in the ribosomal spot of C. elegans.

• KDI Journal of Economic Policy
• /
• v.11 no.4
• /
• pp.23-38
• /
• 1989

본고(本稿)에서는 원화표시수입물가지수(貨表示輸入物價指數) 및 단위노동비용(單位勞動費用) 등의 비용요인(費用要因)과 GNP디플레이터로 표시한 물가(物價)와의 관계를 공적분검증방법(共積分檢證方法)으로 살펴보았는데 단위노동비용(單位勞動費用)과 물가간(物價間)에는 유의한 장기적(長期的) 균형관계(均衡關係)가 존재하나 이 관계식(關係式)에 수입물가지수(輸入物價指數)를 추가하기는 곤란한 것으로 나타났으며 수입물가지수(輸入物價指數)와 물가간(物價間)에도 유의한 장기적(長期的) 균형관계(均衡關係)를 발견하지 못하였다. 이에 따라 공적분(共積分)과 오차수정모형(誤差修正模型)을 사용하여 단위노동비용(單位勞動費用)만으로 인플레식(式)을 추정(推定)한 결과 그 적합도가 뛰어난 것으로 나타났다. 추정결과(推定結果)에 의하면 단위노동비용상승(單位勞動費用上昇)의 물가(物價)에 대한 영향은 영구적이며 최조 2년반 동안에 최대로 나타날 뿐 아니라 과도조정(過度調整)(overshooting)현상(現象)이 있는 것으로 나타났다. 이에 따라 비록 90년도의 임금인상(賃金引上)이 상당폭 둔화(鈍化)된다 하더라도 87년 하반기부터 시작된 단위노동비용급증(單位勞動費用急增)의 누적적 효과로 인하여 90년의 상당히 높은 인플레율은 불가피할 것으로 전망되었다. 마지막으로 이와 같은 물가상승압력(物價上昇壓力)을 완화하기 위해서 정책입안자(政策立案者)의 입장에서 본고(本稿)의 연구결과(硏究結果)에 대해 어떠한 해석이 가능한가를 논의하였는데, 정부(政府)의 정책입안자(政策立案者), 기업가(企業家) 및 근로자(勤勞者) 등 각(各) 경제주체(經濟主體)의 단합된 공동노력(共同努力)이 요구되는 것으로 지적되었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.447-450
• /
• 2012

An analysis of chill-down process was performed for 30 tonf Turbopump-Gas generator coupled tests. The chill-down process must be fulfilled before liquid rocket engine test using cryogenic propellant. Cavitation, damage and/or combustion instability due to bubble of propellant must be eliminated by chill-down process in a test specimen, especially cryogenic pump. The analysis of test data obtained by 30 tonf TP-GG coupled tests was performed in order to be based on the test process of KSLV-II liquid propellant rocket engine which will be developed. To macroscopically understand the process of chill-down from the viewpoint of test procedure the temperatures of important part and total time of chill-down process were analyzed.

• Annual Conference of KIPS
• /
• 2022.05a
• /
• pp.98-101
• /
• 2022

Before the delivery platform was established, when consumers ordered by phone to the store, a rider hired by the store directly delivered it or delivered it through a delivery agency. However, as the food service culture develops, delivery platforms grow and more people seek convenience, making it difficult to see orders without delivery platforms now. When ordering using the delivery platform in this way, there is a shortage of riders and a negative effect of increasing delivery costs for supply. Therefore, we propose a joint delivery chat app to solve the problems of the current delivery system and reduce delivery costs.

• Journal of the Korean Society of Visualization
• /
• v.21 no.1
• /
• pp.57-66
• /
• 2023

In this study, we investigate the effects of a single roughness element on Venturi cavitation. The single roughness element of hemispherical shape is installed at the throat inlet of a Venturi tube. Since the wake behind the roughness element induces an additional pressure drop, cavitation inception occurs at a higher Cavitation number for the Venturi model with the single roughness element than for the Venturi model with no roughness. Cavitation bubbles form along the wake of the roughness element and lengthen in the streamwise direction as the Cavitation number decreases, forming a longitudinal cavitation. With a further decrease in the Cavitation number, the longitudinal cavitation bubble merges with the sheet cavitation initiated from the exit edge of the Venturi tube throat, followed by the shedding of cloud cavitation. The merging of the longitudinal cavitation and sheet cavitation is accompanied by a sudden decrease in the discharge coefficient and an increase in the pressure loss coefficient as it chokes the flow inside the Venturi tube.

• Journal of the Korean Society of Visualization
• /
• v.21 no.1
• /
• pp.94-102
• /
• 2023

Three design parameters were considered in this study: outlet nozzle angle (30°, 60°, 80°), neck length (1 mm, 3 mm), and flow rate (0.5, 0.6, 0.7, 0.8 lpm). A neck diameter of 0.5 mm induced cavitation flow at a venture nozzle. A secondary transparent chamber was connected after ejection to increase bubble duration and shape visibility. The bubble size was estimated using a Gaussian kernel function to identify bubbles in the acquired images. Data on bubble size were used to obtain Sauter's mean diameter and probability density function to obtain specific bubble state conditions. The degree of bubble generation according to the bubble size was compared for each design variable. The bubble diameter increased as the flow rate increased. The frequency of bubble generation was highest around 20 ㎛. With the same neck length, the smaller the CV number, the larger the average bubble diameter. It is possible to increase the generation frequency of smaller bubbles by the cavitation method by changing the magnification angle and length of the neck. However, if the flow rate is too large, the average bubble diameter tends to increase, so an appropriate flow rate should be selected.