• Journal of Ocean Engineering and Technology
• /
• v.32 no.1
• /
• pp.36-42
• /
• 2018

Unlike a slender body, vortices are shed off alternately in the wake of a blunt body. In the case of liquid flows, when the pressure falls below the vapor pressure, cavitation occurs in the vortex core and affects the formation of the vortex street. This phenomenon is of major importance in many practical cases because the alternate shedding of vortices creates imbalanced forces on the body. Hence, it is very important to determine the shedding frequency of cavitating vortices. In this paper, the unsteady cavitating flow around a two-dimensional wedge-shaped submerged body was simulated using the commercial code STAR-CCM+. A numerical investigation of the structure of cavitating vortices was performed for a model with an apex angle of $20^{\circ}C$. The results were validated by comparing them with experimental measurements carried out at a cavitation tunnel of Chungnam National University (CNU-CT). It was found that the shedding frequency of the vortex increased by up to 18%, which was strongly affected by the development of cavitation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.3
• /
• pp.97-105
• /
• 2021

Most of the rural development projects for the welfare of residents are mainly new construction and remodeling projects for community buildings such as village halls and senior citizens. However, in the case of the construction industry, it has been studied that 23% of the total carbon dioxide emissions generated in Korea are generated in the building-related sector. (GGIC, 2015) In order to reduce the emission of environmental pollutants resulting from construction of rural community buildings, there is a need to establish a system for rural buildings by predicting the environmental impact. As a result of this study, the emissions of air pollutants from buildings in rural communities were analyzed by dividing into seven stages: material production, construction, operation, maintenance, demolition, recycling, and transportation activities related to disposal. As a result, 12 kg of carbon dioxide (CO), 0.06 kg of carbon monoxide (CO), 0.02 kg of methane (CH), 0.04 kg of nitrogen oxides (NO), 0.02 kg of sulfurous acid gas (SO), and non-methane volatile organics per 1m of buildings in rural communities It was analyzed that 0.02 kg of compound (NMVOC) and 0.00011 kg of nitrous oxide (NO) were released. This study proved that environmentally friendly design is possible with a quantitative methodology for the comparison of operating energy and air pollutant emissions through the design specification change based on the statement of the rural community building. It is considered that it can function as basic data for further research by collecting major structural changes and materials of rural community buildings.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.2
• /
• pp.11-18
• /
• 2021

A community-centered smart village process model was developed through the theoretical review of the rural field forum. By analyzing the difference in technology demand according to the digital capabilities of leaders by community type, village types were classified and detailed technologies were defined. The smart village process was proposed to enable residents to operate autonomously by inducing continuous interest and participation of local residents through the conception stage, planning stage, implementation and self-reliance stage, and allowing them to cooperate together. The business model canvas was reconstructed to be used in the workshop. It was applied to the village of Yesan-gun. As a result of running a resident workshop using the business model Cambus, the lack of resident awareness and illegal garbage dumping were presented as the first problems to be solved. The value of the village was set as 'a village that is clean and clean with a sense of residents, and a good place to live', and users were expressed as 'family' and 'outsiders'. It was suggested that we meet frequently to convey the value of the village by using broadcasting and announcements as a channel to convey the value. Core activities were to cultivate residents' consciousness, such as implementing a campaign against illegal garbage dumping, and to establish and guide separate collection sites. When a garbage collection center is installed, it was estimated that around 2 million won per month for management costs, and it was investigated that it was possible to spend an hour or so twice a month to solve the problem of illegal dumping. If a method to derive village projects based on the derived business model canvas is developed in the future, it will be more practical.

• The Korean Journal of Franchise Management
• /
• v.2 no.2
• /
• pp.24-44
• /
• 2011

Many companies are increasingly using social network service(SNS) as an online marketing tool, and its marketing activation has been in the limelight as a differentiation strategy most recently. The purpose of this study is to analyze online marketing cases utilizing SNS and to apply it in Franchise Enterprise in order to activate its marketing activities. This study is more concerned with the cases of facebook, twitter, and blog among social network services and suggests some ways of utilizing them in Franchise Enterprise as follows: Based on the examples of facebook, firstly, we set up the role as a homepage in individul, Franchise Enterprise, and other organizations. Secondly, we also set up the role as an organizing tool in communities, and thirdly, setting up the role as a location map tool. Regarding some applications in marketing tool of Franchise Enterprise, we suggest the role as a public relation tool of the company and brand, and also propose the role of brand planning and development. Finally, we suggest a way of overcoming the limitation in offline operations.

• Journal of Appropriate Technology
• /
• v.7 no.1
• /
• pp.115-124
• /
• 2021

Due to the successful accomplishments of the first-stage base center project, a road-map for the second-stage, global base center 2030 project has recently been proposed. The vision of the base center is to build a technology centered, cooperation based platform for a sustainable global community. The global base center 2030 project is based on three core strategies as well as three key strategies. The main goal of the core strategy is to establish an interdisciplinary smart platform, as well as a global tech-coordination facility to implement sustainable, inclusive, and innovative science and technology based ODA projects. To achieve such goals, the global center will focus on developing a global living lab, interdisciplinary smart linkage systems, and a global operating platform. The main goals for the key strategies are to solve issues at the base centers while establishing an international relationship through sustainable technology. To achieve such goals, key projects are centered in establishing a ICT package, and a global living lab based on smart interconnected system. With this, a global inter-connected business platform will also be established to support technical and operational issues.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.71-83
• /
• 2009

Shotcrete is an important primary support for tunnelling in rock. The quality control of shotcrete is a core issue in the safe construction and maintenance of tunnels. Although shotcrete may be applied well initially onto excavated rock surfaces, it is affected by blasting, rock deformation and shrinkage and can debond from the excavated surface, causing problems such as corrosion, buckling, fracturing and the creation of internal voids. This study suggests an effective non-destructive evaluation method of the tunnel shotcrete bonding state applied onto hard rocks using the impact-echo (IE) method and ground penetration radar (GPR). To verify previous numerical simulation results, experimental study carried out. Generally, the bonding state of shotcrete can be classified into void, debonded, and fully bonded. In the laboratory, three different bonding conditions were modeled. The signals obtained from the experimental IE tests were analyzed at the time domain, frequency domain, and time-frequency domain (i.e., the Short- Time Fourier transform). For all cases in the analyses, the experimental test results were in good agreement with the previous numerical simulation results, verifying this approach. Both the numerical and experimental results suggest that the bonding state of shotcrete can be evaluated through changes in the resonance frequency and geometric damping ratio in a frequency domain analysis, and through changes in the contour shape and correlation coefficient in a time-frequency analysis: as the bonding state worsens in hard rock condition, the autospectral density increases, the geometric damping ratio decreases, and the contour shape in the time-frequency domain has a long tail parallel to the time axis. The correlation coefficient can be effectively applied for a quantitative evaluation of bonding state of tunnel shotcrete. Finally, the bonding state of shotcrete can be successfully evaluated based on the process suggested in this study.

• The Journal of Engineering Geology
• /
• v.3 no.3
• /
• pp.215-230
• /
• 1993

In-situ rock mass demonstrates the variety of structural features, and especially the mechanical and spatial characteristics of joint (or joint system) greatly affect the deformation and fallure strength of the rock mass. In this study finite element model capable of analyzing the viscoplastic behavior of reinforced jointed rock mass has been developed based on equivalent material approach. Accuracy and reliability of the numerical model have verified by simuiating the behavior of simplified block model and comparing the results with analytic solutions. Practical applicability was also demonstrated by analyzing the time-dependent behavior of underground oil storage tunnel and assessing the reinforcement effect of rockbolt.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.6
• /
• pp.25-30
• /
• 2010

Dual throat nozzle(DTN) is recently attracting much attention as a new concept of the thrust vectoring technique. This DTN is designed with two throats, an upstream minimum and a downstream minimum at the nozzle exit, with a cavity in between the upstream throat and exit. In the present study, a computational work has been carried out to analyze the performance of a dual throat nozzle(DTN) at various mass flow rate of secondary flow and nozzle pressure ratios(NPR). Two-dimensional, steady, compressible Navier-Stokes equations were solved using a fully implicit finite volume scheme. The present computational results were validated with some experimental data available. Based upon the present results, The control effectiveness of thrust-vector is discussed in terms of the thrust coefficient and the discharge coefficient.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.1-7
• /
• 2010

Dual throat nozzle(DTN) is recently attracting much attention as a new concept of the thrust vectoring technique. This DTN is designed with two throats, an upstream minimum and a downstream minimum at the nozzle exit, with a cavity in between the upstream throat and exit. In the present study, a computational work has been carried out to analyze a fundamental performance of a dual throat nozzle(DTN) at various nozzle pressure ratios(NPR) and throat area ratios. Two-dimensional, axisymmetric, steady, compressible Navier-Stokes equations were solved using a fully implicit finite volume scheme. NPR was varied in the range of NPR from 2.0 to 10.0, at different throat area ratios. The present computational results were validated with some experimental data available. Based upon the present results, the performance of DTN is discussed in terms of the discharge coefficient and thrust efficiency.

• Journal of ILASS-Korea
• /
• v.4 no.3
• /
• pp.32-41
• /
• 1999

In this research, internal-mixing twin-fluid atomizer using sonic energy is designed and manufactured. We are trying to intimate high efficiency twin-fluid atomizer to obtain good liquid atomization in the low pressure region. Define of geometric form of atomizer, characteristics of spray is influenced by position, depth and height variation of cavity resonator, variation of sound intensity and resonant sound frequency with liquid flow rate. The liquid atomization is promoted by multi-stage disintegration of mixing flow of gas with liquid and the optimum condition of position and depth of cavity resonator according to sonic energy is obtained from the condition at a=2.5mm and L=2mm. The velocity distribution of droplets shows negative value due to recirculation region at the center of axial, and as the radial direction distance is far, the velocity distribution of droplets decrease slowly after having a maximum value. However velocity and SMD show nearly uniform distribution at the down stream and as result compared to Nukiyama and Tanasawa's equation. atomization of mixing flow with air and liquid dispersing from the outlet of the nozzle is promoted by the effect of collision at the cavity resonator.