• The Korean Publising Journal, Monthly
• /
• s.213
• /
• pp.16-17
• /
• 1997

• Journal of the Korean Geotechnical Society
• /
• v.35 no.1
• /
• pp.43-53
• /
• 2019

This paper described a result of finite element analysis considering sewerage damage scale and soil depth, in order to analyze quantitatively for cavity and relaxation zone of underground due to sewerage damage. The mechanical model, which was verified by previous studies, was applied to the finite element analysis. In addition, the mechanical behavior of the soil around the sewerage damage due to the soil loss was simulated by using the forced displacement. Based on finite element analysis results, characteristics of the void ratio distribution, ground subsidence, and shear stress distribution according to sewerage damage scale and soil depth were analyzed. And then, The boundaries of the underground cavity and relaxation zone were determined by using the shear stress reduction characteristics of the ground. Also, an occurrence scope of the cavity and relaxation zone was quantitatively evaluated by the change of sewerage damage scale and soil depth.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.231-240
• /
• 2017

Recently, there have been frequent occurrences of ground sink in the urban area, which have resulted in human and material damage and are accompanied by economic losses. This is caused by artificial factors such as soil loss, poor compaction, horizontal excavation due to the breakage of the aged sewage pipe, and lack of water proof at vertical excavation. The ground sink can be prevented by preliminary restoration and reinforcement through exploration, but it can be considered that it is not suitable for urgent restoration by the existing method. In this study, a model experiment was carried out to simulate the in-ground cavities caused by groundwater flow for developing non-excavation urgent restoration in underground cavity and the range of the relaxation zone was estimated by detecting the around the cavity using a relaxation zone detector. In addition, disturbance region and relaxation region were separated by injecting gypsum into cavity formed in simulated ground. The shape of the underground cavity due to the groundwater flow was similar to that of the failure mode III formed in the dense relative density ground due to water pipe breakage in the previous study. It was confirmed that the relaxed region detected using the relaxation zone detector is formed in an arch shape in the cavity top. The length ratio of the relaxation region to the disturbance region in the upper part of the cavity center is 2: 1, and it can be distinguished by the difference in the decrease of the shear resistance against the external force. In other words, it was confirmed that the secondary damage should not occur in consideration of the expandability of the material used as the injecting material in the pre-repair and reinforcement, and various ground deformation states will be additionally performed through additional experiments.

• Tunnel and Underground Space
• /
• v.18 no.2
• /
• pp.91-97
• /
• 2008

In this paper, in-situ technique for measuring hydraulic conductivity of Excavation Disturbed Zone (EDZ) in a direct way and its application to an Underground Research Laboratory (URL) site were introduced. It was understood that both the EDZ oriented test equipment as a hardware and analysis/evaluation technique as a software should be integrated for upgrading a quality of estimated EDZ hydraulic conductivity. The well-estimated EDZ hydraulic conductivity is expected to enhance a reliability of stability evaluation for caverns under groundwater table and design of a waterproof or drainage system as well as a grout system.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2001.03a
• /
• pp.118-131
• /
• 2001

우리 나라의 양수발전소는 지금까지 단일공동을 굴착하였다. 그러나 양양 양수발전소는 두 개의 대공동 즉, 발전소와 주 변전소로 구성된다. 이 경우 공동 구조물의 안정성, 특히 두 공동사이에 형성되는 암주를 영구적으로 안전하게 유지 할 수 있도록 보장되어야 한다. 본 연구에서는 개별요소법을 이용하여 두 공동과 암주의 구조적 안정성을 평가하였으며, 구성모델로 Barton-Bandis의 절리모델을 이용하였다. 현지 암반의 초기응력, 자연절리면의 거칠기계수 불연속면의 공간적 분포 특성과 같은 중요한 요인들은 현지 조사를 통하여 구하였다. 이외에 두 가지 경우 즉, 무보강과 보강의 경우 지보시스템의 최적화를 분석하였으며, 또한 보강효과를 검토하였다. 연구결과 보강의 경우 수평변위와 절리의 전단변위가 감소되었으며 암주내 이완영역 역시 감소됨을 확인하였다. 두 공동사이에 있는 약 36m 두께의 암주에 적절한 보강조치를 취하여 안정성을 확보할 수 있었다.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.604-609
• /
• 2016

슬롯판을 이용한 경사충격파와 경계층 간섭유동 제어에서, 슬롯판 아래에 있는 공동부의 형상을 바꾸어 가며 제어 성능을 비교하는 수치적 연구가 수행되었다. 공동형상 직사각형 5개, 사다리꼴 3개를 선정하여 shock 뒤에서 경계층 안정성, 전압손실을 기준으로 제어 성능을 평가하였다. 수치해석 결과 모든 형상에 대해 제어하지 않은 상태보다 좋은 성능을 얻었다. 그 중 경계층 안정성 측면에서는 형상 L과 R, 전압손실 감소 측면에서는 형상 M과 A가 효과적임을 확인하였고, 종합적으로 슬롯의 끝 면과 공동의 길이방향 끝 면이 일치하는 형상에서 상대적으로 좋은 결과를 얻음을 확인했다. 또한 슬롯과 공동 내부유동을 분석하면서 경계층 안정성과 전압손실 감소에 영향을 미치는 것은 separation 영역을 얼마 원활히 흡입하는지의 여부임을 알 수 있었고, 상류 슬롯에서 발생하는 shock에 대한 추후 해결 연구도 필요함을 알 수 있었다.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.05a
• /
• pp.97-102
• /
• 2005

본 연구에서는 사업주체 및 사업영역 선정을 중심으로 한국영상물 산업의 물류공동화 전략 및 방안에 대하여 고찰 해보고자 하였다. 본 연구 방법으로는 문헌자료, 보고서, 실증사례를 바탕으로 연구가 진행되었다. 본 연구에서는 영상물 물류공동화 전략방안으로는 단기적, 장기적 전략방안으로 구분하여 고찰 하였다. 단기전으로는 하주가 운영을 하면서, 공동운영하는 방법과 장기적으로는 물류업자가 운영을 하면서, 대행위탁사업으로 전개하는 방안을 도출하였다. 본 연구의 대상은 영상물 물류공동화에 한정하여 연구가 진행되어졌다. 향후 타 업종으로 확대하여 연구할 필요가 있다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.58-69
• /
• 1989

A theoretical analysis of strong double dips in the amplitude patterns of electromagnetic field scattered by an air cavity embedded in a dielectric medium is presented with the experimental and the numerical simulation. The strongest double dips occur at the locations corresponding to the top and the bottom of the cavity by adjusting the excitation wavelength nearly equal to its radius. In particular, it may be shown that these double dips always become two nulls at a particular sending frequency in the near-field region. The locus of the frequency providing the strongest dip as a function of the observation distance is plotted.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.535-537
• /
• 2022

AI 가속기는 머신 러닝 및 딥 러닝을 포함한 인공 지능 및 기계 학습 응용 프로그램의 연산을 더 빠르게 수행하도록 설계된 일종의 하드웨어 가속기 또는 컴퓨터 시스템이다. 가속기를 설계하기 위해선 설계 영역 탐색(Design Space Exploration)을 하여야 하고 여러 인공지능 중에서도 합성 곱 신경망(CNN)에 대한 설계 영역 탐색을 소개한다.

• Journal of Christian Education in Korea
• /
• v.67
• /
• pp.117-156
• /
• 2021

This study was conducted in order to investigate the effect of interaction bewteen a Sense of Community and Marital Intimacy effect on learning participation motive in the church family ministry program. In this study, data from 607 people(male: 302, female: 305) nationwide churches and institutes participating in church family ministry program were collected as analysis targets. The produced results from this study are: First, Emotional connection, one of the Marital Intimacy, has meaningful effect (t=6.087, p<.001) on Continuous motivation, one of the learning participation motive. Second, Membership, one of the Sense of Community, has meaningful effect (t=3.343, p<.001) on Intrinsic motivation, one of the learning participation motive. Third, Influence, one of the Marital Intimacy, has meaningful effect (t=5.358, p<.001) on Extrinsic motivation, one of the learning participation motive.