• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.7
• /
• pp.1029-1036
• /
• 2004

The fragrant fabrics were prepared by treatment with eucalyptus microcapsules. 100% cotton fabric, 100% polyester fabric and 100% wool fabric were used as test specimens. Using pad-dry-cure method, microcapsules were attached on each specimen by acrylic binder under conditions of varying concentration. Surface property, stiffness, and air permeability of fragrant fabrics were evaluated. As increasing concentration of binder, add-on yield was increased. Add-on yield was decreased with increasing laundering cycle, especially in polyester fabric. As the concentration of binder was increased, the properties of stiffness and air permeability were decreased. Also it fumed out that pad-dry-cure method was not suitable to polyester fabric.

• Journal of Fashion Business
• /
• v.9 no.2
• /
• pp.57-70
• /
• 2005

Chitosan pre-treatment of the fabrics prior to the dyeing processes has been reported to increase the uptake of natural dyestuffs. In this study, cotton, nylon, and PET fabric specimens were pre-treated with chitosan prior to the dyeing (Method 1), or the state of chitosan acid salt formation, coated on the yarn surface, was destroyed prior to the dyeing process by alkaline neutralization process (Method 2). In case of the acid salt formed cotton (Method 1), treated fabrics showed more yellowish color component of cochineal, while alkali-treated (Method 2) cotton showed more uptake of bluish color of cochineal.

• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.512-517
• /
• 1995

EMI 대책용 전자파 흡수체로 알려진 cu-Ni-쿠 페라이트를 분말야금법으로 제조하여, 성형압력과 소결온도의 변화에 따른 미세조직을 과낯ㄹ하고, 투과반사법으로 전자파 흡수능을 측정하여 조직과의 관계로 검토하였다. 하소는 공기중에서 90$0^{\circ}C$로 2시간동안 행하는 것이 최적이었다. 미세조직과 입자의 크기는 성형압과 소결온도로 제어할 수 있다. 100Mpa로 성형한 것이 치밀하고, 전자파 흡수특성이 우수하였다. 복소유전율과 복소투자율은 기공도와 소결밀도에 영향을 받았다. 전자파흡수능은 밀도보다는 입자의 크기에 더 큰 영향을 받았다.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.84-86
• /
• 2001

본 논문에서는 고성능 활성탄의 악취 및 유해가스 흡착효율과 멜트브로운(M/B)부직포의 여과성능에 의한 복합적인 고기능 방진특성을 갖는 활성탄 부착 M/B 국산화 여과재를 제조개발하였다. 고성능 활성탄은 고순도의 일반활성탄에 금속염, 유기물 등을 담지시켜 활성화시킨 활성탄이고, M/B여과재의 웹(web)제조조건은 M/B 방사기에서 방사온도 250℃, 방사속도 150m/sec, 고온공기온도 250℃ 그리고 DCD(die to collector distance) 20cm가 적합함을 알 수 있었다. 또한 M/B 여과재에 활성탄 부착은 열롤러시스템에 의한 열적결합방법을 이용하여 균일한 분포의 점접착결합구조를 갖도록 하였고, 개발된 복합기능 여과재가 방진마스크용 여과재로의 이용이 가능하다는 것을 분진포집효율, 투과율, 흡기저항 등 여과재 성능기준실험 결과를 통해 확인하였다.

• Journal of Welding and Joining
• /
• v.1 no.2
• /
• pp.7-11
• /
• 1983

본 공장(진해화학주식회사)에서 암모니아는 나프타를 원료로 한 수소와 공기 중의 질소를 합성하여 제조된다. 암모니아 제조 공정 중 메탄가스(CH$_{4}$)와 수소가스(H$_{2}$) 중에 불순물로 존재하는 유화 수소(H$_{2}$S)를 제거시키는 공정이 탈황공정이다. 탈황공정은 산화 아연(ZnO)과 코발트-몰리브덴(Cobalt-Molybdenum) 촉매층에서 이루어지며 탈황공정이 이루어지는 용기를 탈황조(desulfurizer vessel)라 한다. 본 공장에 설치된 탈황조는 1966년에 설치되어 운용되어 왔다. 본 공장의 안전 조업을 위해 초음파 탐상법, 방사선 투과 탐상법, 표면 침투 탐상법으로써 탈황조의 노후도 측정을 행하였다. 탐상 결과 스테인레스 클래드의 모재부 용접선을 따라 균열이 발견되었다. 균열 부위를 깊이 연마하여 용접 결함부를 제거하고 다시 용접을 함으로써 본 탈황조를 연장하여 사용할 수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1306-1312
• /
• 2001

In this study. the acoustic power balancing method to analysis HVAC system noise is presented. The method can consider not only forward but also backward propagations of noise generated by the operation of air supply units and aerodynamical disturbance at duct elements. This can be done by estimating sound transmission and reflection properties of duct elements. and balancing acoustic powers of total HVAC system. To verify the accuracy of the presented method. numerical analysis for a HVAC system is carried out and the results are compared with those obtained by a traditional empirical method. suggested by National Environmental Balancing Bureau.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.254-254
• /
• 2015

본 연구에서 사용한 부유식방파제는 상치의 공기주입량에 따라 흘수심을 조절할 수 있으며, 부유식방파제 입사면과 투과면에 하부슬릿을 두어 입사파랑의 제어가 가능하도록 고안하였다. 또한, 수리 모형실험에서는 카테너리(catenary) 계류시스템의 계류각 변화에 따른 장력특성을 분석하였다. 일반적으로 계류시스템은 계류점, 계류형상 및 인장정도에 따라 구분된다. 본 연구에서는 부유식방파제의 6자유도 운동 중 2차원운동에 따른 장력특성 분석을 위하여 4점 계류를 채택하였으며, 계류형상은 일정 동요량을 허용하지만 안전성이 높은 카테너리형을 적용하였다. 수리모형실험을 통하여 투수성 부유식방파제의 장력특성을 분석하고, 입사파랑 변화에 따른 계류시스템의 안전성을 분석한 결과, 투수성부유식방파제는 계류각 전 구간에서 무공형부유식방파제에 비하여 최대장력이 낮게 측정되었으며 안전성이 확보되었다.

• Membrane Journal
• /
• v.21 no.2
• /
• pp.155-162
• /
• 2011

Dense tubular $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ (BSCF) membranes were prepared by extrusion technique. The phase structure of the $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ membranes was characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). Relative density of $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ tubular membrane was 94.10%. Oxygen permeation was measured at difference operating condition of feed side and permeate side in the temperature range from 700 to $950^{\circ}C$. The oxygen permeation flux of dense tubular $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ membrane reached maximum 1.37 mL/$min{\cdot}cm^2$ at $900^{\circ}C$ exposed to ambient air (feed side) and vacuum pump (permeate side).

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.310-315
• /
• 2009

Perovskite-type ceramic powder, $La_{0.7}Sr_{0.3}Co_{0.3}Fe_{0.7}O_{3-{\delta}}$, have been synthesized successfully by the citrate method. As a result of TGA for precursor, metal-citrate complex in precursor was decomposed in the temperature range of $150{\sim}650^{\circ}C$. XRD analysis showed the single perovskite structure was observed over $1,000^{\circ}C$ without impurities. Typical dense membrane with 1.6 mm thickness has been prepared using as-prepared powder by pressing unilaterally and sintering at $1,300^{\circ}C$. The electrical conductivity of $La_{0.7}Sr_{0.3}Co_{0.3}Fe_{0.7}O_{3-{\delta}}$ membrane increased with increasing temperature at atmosphere of air and then decreased over $600^{\circ}C$ due to oxygen loss from the crystal lattice. The oxygen flux of $La_{0.7}Sr_{0.3}Co_{0.3}Fe_{0.7}O_{3-{\delta}}$ membrane in the range of 700 to $950^{\circ}C$ increased with the increasing temperature from 0.045 to $0.415ml/cm^2{\cdot}min$. The activation energy for oxygen permeation was calculated to be 89.17 kJ/mol.

• Membrane Journal
• /
• v.25 no.5
• /
• pp.415-421
• /
• 2015

$SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ oxide was synthesized by solid state reaction method. Dense ceramic membrane was prepared using as-prepared powder by pressing and sintering at $1250^{\circ}C$. XRD result of membrane showed single perovskite structure. The oxygen permeability were measured under 0.21 atm of oxygen partial pressure ($P_{O_2}$) and between 800 and $950^{\circ}C$. The oxygen permeation flux of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ membrane was increased with the increasing temperature. The maximum oxygen permeation flux was $1.839mL/min{\cdot}cm^2$ at $950^{\circ}C$. Long period permeability experiment was carried out to confirm the phase stability and $CO_2$-tolerance of membrane containing Nb in the condition of air with $CO_2$ (500 ppm) as feed stream at $900^{\circ}C$. The phase stability and $CO_2$-tolerance of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ were investigated by XRD and TG analysis. The result of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ which exposed carbon dioxide for 100 hours indicated 8wt% of $SrCO_3$. But it was known that the level of $SrCO_3$ production dose not have a significant effect on oxygen permeability.