• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.220-222
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.137-138
• /
• 2006

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2012년도 춘계학술논문집 2부
• /
• pp.516-519
• /
• 2012

산업 현장에 필수적으로 사용하는 유틸리티 시스템(Utility System)의 하나인 에어를 생산하는 공기압 축기의 운전방식은 조작 패널부에 사용자가 설정한 셋팅값에 의해 내부의 밸브를 제어하여 로딩 및 언로딩 운전을 한다. 이로 인해 대용량(100HP, 200HP)의 공기압축기를 여러대 사용하는 수용가에서는 연속 다발적인 운전으로 인한 전력 사용량의 변동으로 역률 저하 및 연속가동으로 인한 설비 과부하 및 내부 기계 베어링 피로도 증가 및 파손 등 고장이 발생되는 문제점이 있다. 따라서 본 논문에서는 인공 신경회로망(ANN:Artificial Neural Network)을 이용하여 최적의 에너지 운용 알고리즘을 제안하여 실계통의 문제점을 분석하여 개선하고자 한다.

• 기계와재료
• /
• 제10권4호통권38호
• /
• pp.97-110
• /
• 1998

플라이휠 에너지 저장시스템은 입력되는 잉여전기에너지를 플라이휠의 관성을 이용, 회전 운동에너지로 변환하여 저장하고 필요시 전기에너지로 순시에 출력하는 장치로 배터리와 같은 화학적 에너지 저장장치에 대비되는 기계적 에너지 저장방식 (Electro-mechanical Battery)이다. 플라이휠 시스템은 많은 에너지를 단시간에 저장하고 이를 순발적으로 활용할 수 있는 고효율, 장수명, 무공해의 청정 에너지저장/재생장치로 선진국에서는 무공해 교통수단(전기자동차 등)의 차세대 보조 동력원을 비롯한 각종 민수용, 국방용으로 응용연구가 활발히 진행되고 있다(전력저장용, 인공위성의 태양광 에너지 저장 및 자세제어용, 무소음 적진침투용 차세대 전차의 보조동력원 등). 고효율의 에너지 저장 및 재생을 위해 플라이휠 에너지 저장시스템은 크게 .고속화, 고에너지저장을 위한 복합재 플리이휠 로터.공기 마찰손실 저감용 자가 진공펌프(Self Vacuuming system).지지부 접촉마찰로 인한 에너지 손실 저감용 자기베어링/제어부.플라이휠 구동 및 발전을 위한 Motor/generator.고효율 에너지 입출력 제어부 등의 첨단기술부품으로 구성되어 있는 바, 본 논문에서는 이러한 플라이휠 에너지 저장기술의 국내외 개발현황을 소개하고 현재까지 파악된 기술적 문제점 및 향후 기술개발 전망에 대해 논하고자 한다.

• 한국정밀공학회지
• /
• 제23권10호
• /
• pp.103-112
• /
• 2006

This paper describes a theoretical analysis and experimental verification on the performances of a vacuum-compatible air bearing, which is designed with a cascaded exhaust scheme to minimize the air leakage in a vacuum environment. The design of the vacuum-compatible air bearing equipped with the differential exhaust system requires great care because several design parameters, such as the number of exhaust stages, diameter of exhaust tube, pumping speed of a vacuum pump, and bearing clearance greatly influence the air leakage and thus degree of vacuum. In this study, a performance analysis method was proposed to estimate the performances of the air bearing, such as load capacity, stiffness, and air leakage. Results indicate that the load capacity and stiffness of the air bearing was improved as its boundary pressure, which was determined by the $1^{st}$ exhaust method, was lowered, and the dominant factors on the chamber's degree of vacuum were the number of exhaust stages, exhaust tube diameter and bearing clearance. A vacuum chamber and air bearing stage using porous pad were fabricated to verify the theoretical analysis. The results demonstrate that chamber pressure up to an order of $10^{-3}$ Pa was achieved with the air bearing stage operating inside the chamber, and this analysis method was valid by comparing predicted values with experimental data, for the mass flow rates from the porous pad, and pressures at each exhaust port and chamber, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.128-135
• /
• 2006

This paper presents a finite element method to analyze the free vibration of a flexible HDD composed of the spinning disk-spindle system with fluid dynamic bearings(FDBs), the head-suspension-actuator with pivot bearings, and the base plate with complicated geometry. Experimental modal testing shows that the proposed method well predicts tue vibration characteristics of a HDD. This research also shows that even the vibration motion of the spinning disk corresponding to half-speed whirl and the pure disk mode are transferred to a head-suspension-actuator and base plate through the air bearing and the pivot bearing consecutively. The proposed method can be effectively extended to investigate the forced vibration of a HDD and to design a robust HDD against shock.

• 한국공작기계학회논문집
• /
• 제13권5호
• /
• pp.38-48
• /
• 2004

Recently the use of high-speed equipment in machine-tool industry has greatly increased, which requires the development of prognostics and prediction methods on the design stage. Conversion of the test/experiments stage from real to virtual reality will not only significantly reduce the design and manufacturing cost, but will also increase design quality. This paper shows how it is possible to develop the automated system for the design calculations of the air-bearing spindles. First, the general calculation method is introduced. It contains several steps, namely, geometry identification, pressure calculation, stiffiness calculation, dynamics characteristics calculation. For geometry identification reducing spindle shaft to rings was proposed, which helps to automate the calculation process. For pressure calculation the Peshti method was implemented. For stiffiness calculation the analysis was made, which shown the necessity of correct calculation step selection. Then the system of ordinary differential equations containing influence coefficients was evolved, which is used for trjectories calculation. The graphical representation of the calculation results shows the dynamic behavior of the spindle unit concerning various working conditions. Finally, this automated system is illustrated by an example of the air-bearing spindle calculation.

• 한국정밀공학회지
• /
• 제30권12호
• /
• pp.1313-1320
• /
• 2013

An ultraprecision multi-axis machine tool has been designed and developed in our laboratory. The machine tool has four moving axes which are composed of three linear axes and one rotational axis. It has a gantry type structure and the Z-axis is on the X-axis and the C-axis, on which a workpiece is located, is inside the Y-axis. This paper shows control performance improving method and procedure for the ultra-precision positioning control of a hydrostatic bearing guided linear axis. Through improvements of electrical and mechanical components for the control system such as control electronics and oil pumping systems, the control disturbing noise is decreased. Also by the frequency domain analysis of control system those problem-making system components are identified and modified with analytical methods. The controller is analyzed and designed from frequency domain data and system information. In the experimental control results the nanometer order control result is successfully presented.

• 한국소음진동공학회논문집
• /
• 제17권1호
• /
• pp.24-32
• /
• 2007

This paper presents a finite element method to analyze the free vibration of a flexible HDD composed of the spinning disk-spindle system with fluid dynamic bearings(FDBs), the head-suspension-actuator with pivot bearings, and the base plate with complicated geometry. Experimental modal testing shows that the proposed method well predicts the vibration characteristics of a HDD. This research also shows that even the vibration motion of the spinning disk corresponding to half-speed whirl and the pure disk mode are transferred to a head-suspension-actuator and base plate through the air bearing and the pivot bearing consecutively. The proposed method can be effectively extended to investigate the forced vibration of a HDD and to design a robust HDD against shock.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.320-327
• /
• 2002

In concert with the growing emphasis placed on distributed power generation there will be a need, in the first decade of the 21th century, for a compact thermal energy system capable of providing the total energy needs of individual homes. A natural gas fueled co-generation micro-turbine with ultra low emission will meet this need. Market opportunities for a distributed micro turbine co-generation system are projected to increase dramatically. In this paper, It was determined that with current state of art component performance levels, metrallic materials, thermal efficiency goal of $28\%$ at sea level standard day conditions are attainable. Higher overall thermal efficiency of $78\%$ is attainable with micro-turbine combined with exhaust fired boilers.