• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.455-458
• /
• 2008

단백질체학에서 2-DE는 조직내의 단백질을 규명하는 단백질 분리 기술로서 2-DE에 의하여 생성된 단백질 이미지에서 스팟 매칭을 진행하여 상이한 단백질 젤 내에 존재하는 동일한 단백질 클래스를 찾을 수 있다. 그러나 단백질 2-DE 이미지는 실험 환경의 변화에 민감하여 이미지의 위치적인 변형이나 먼지, 공기방울 등으로 인해 많은 에러 정보를 포함할 수 있다. 이러한 에러는 스팟 매칭에 치명적인 영향을 주어 낮은 정확도를 가지게 된다. 본 논문에서는 단백질 2-DE 이미지 분석을 위한 스팟 매칭에서의 정확도를 향상시키기 위하여 기준점 학습과 기준점 추출의 두 단계로 이루어진 자동화된 기준점 추출 방법을 사용하여 스팟 매칭의 정확도를 향상시킬 수 있는 최적의 기준점을 선정하는 방법을 제안하며 선정된 기준점을 기반으로 다수의 기준 이미지를 선택하여 스팟 매칭을 반복적으로 진행함으로써 확률 기반의 정확한 스팟 매칭 결과를 도출하고자 한다. 특히 데이터 마이닝 기법에서 사용되는 최소지지도 값을 적용함으로써 지지도가 높은 스팟 매칭 결과를 빈발한 스팟 매칭으로 판정한다. 제안한 스팟 매칭 정확도 향상 기법의 정확도를 평가하기 위하여 실제 단백질 2-DE 젤 이미지 데이터를 사용하여 입력 기준점의 개수와 최소 지지도의 증가에 따른 정확도의 변화를 분석하였다.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.61-68
• /
• 2006

Soil washing techniques coupled with high pressure air jet were applied for diesel-contaminated soils sampled by an underground oil reservoir of which the initial total petroleum hydrocarbon (TPH) ($2,828{\pm}206\;mg/kg$) exceeded 5 times of current standard level (500 mg/kg) regulated by the Soil-Environment Conservation Law. Through several tests, we found that the position of impeller has a critical impact for washing efficiencies. The highest washing efficiency was obtained at an oblique angle (30 degree) for the impeller and optimized mixing speed (300 rpm) that could have high shearing forces. Considered economical and feasible aspects, the optimum mixing time was 10 min. Rate constants of TPH removal derived from the first-order equation were not linearly increased as mixing speed increased, indicating that mechanical mixing has some limits to enhance the washing efficiencies. Application of high-pressure air jet in washing process increased the washing efficiency. This increase might be caused by the fact that the surface of micro-air bubbles strongly attached hydrophobic matters of soil particles. As the pressure of air jet increased, the separation efficiencies of TPH-contaminated soil particles increased. In the combined process of high-pressure air jet and mixing by impeller, the optimum mixing speed and air flow-rate were determined to be 60 rpm and $2\;kg/cm^2$, respectively. Consequently, the washing technique coupled with high-pressure air jet could be considered as a feasible application for remediating petroleum-contaminated soils.

• 한국가시화정보학회:학술대회논문집
• /
• 2005.12a
• /
• pp.17-22
• /
• 2005

An experimental study was carried out to investigate the effect of local ultrasonic forcing on a turbulent boundary layer. Stereoscopic particle image velocimetry (SPIV) was used to probe the characteristics of the flow. A ultrasonic forcing system was made by adhering six ultrasonic transducers to the local flat plate. Cavitation which generates uncountable minute air-bubbles having fast wall normal velocity occurs when ultrasonic was projected into water. The SPIV results showed that the wall normal mean velocity is increased in a boundary layer dramatically and the streamwise mean velocity is reduced. The skin friction coefficient ($C_{f}$) decreases $60\%$ and gradually recovers at the downstream. The ultrasonic forcing reduces wall-region streamwise turbulent intensity, however, streamwise turbulent intensity is increased away from the wall. Wall-normal turbulent intensity is almost the same near the wall but it increases away from the wall, In tile vicinity of the wall, Reynold shear stress, sweep strength and production of turbulent kinetic energy were decreased. This suggests that the streamwise vortical structures are lifted by ultrasonic forcing and then skin friction is reduced.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1240-1247
• /
• 2003

Water jet nozzle for LCD has been used as a wet cleaning process in many industries. It is necessary for the nozzle to consider cleaning effect and flux. In this paper, we applied the bubble dynamic theory(Rayleight-Plesset equation) to improve the cleaning efficiency. Generally, Rayleigh-Plesset equations for cavitation bubbles are used in analyzing computer simulation for caviting flows. Burst of bubbles causes potential energies and we can use these energies to remove organic and inorganic compounds on the LCD. Therefore, it is necessary to analyze the bubble generations and axiomatic design by computational fluid dynamics(CFD). By comparing the weight matrix of neural networks to the design matrix of axiomatic design, we propose methods to verify designs objectively. The optimal solution could be deduced by the regression analysis using the design parameters.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.52-58
• /
• 1996

Using the acoustic resonances and oscillatory pulsations considered as the branch of wave technologies, the concept of the acoustic resonance diffusers for waste water treatment which maximize the oxygen transfer efficiency in gas-liquid two phase medium have been proposed, and studies for the principles and performance tests were accomplished. Besides, the design concepts for the low pressure Helmholtz resonator, cylinder and annular type reflection resonator and combined type resonance system have been implemented. The acoustic resonance energy which can speed up the mass transfer process increase the oxygen transfer efficiency, and periodic pulsations generated from the instability of air jet from nozzle make very small air bubbles. Then, the annular type jet resonator(AJR) applying these two principles successfully was evalulated as the most promising device and also the efficiency showing $20{\sim}30%$ better than conventional diffusers has been verified experimentally.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.323-328
• /
• 2016

Pressurized membrane used for side-stream MBR process requires fouling control strategy both for normal and abnormal operation conditions for stable operation of the facilities. In this study, $85m^3/day$ of pilot-scale side-stream MBR process was constructed for the evaluation of fouling mitigation by air bubble injection into the membrane module. In addition, fouling phenomena at abnormal operation conditions of low influent and/or loading rate were also investigated. Injection of air bubble was found to be effective in delaying transmembrane pressure (TMP) increase mainly due to scouring effect on the membrane surface, resulting in expanded filtration cycle at a high flux of $40L/m^2{\cdot}h$ (LMH). At abnormal operation condition, injection of PACl (53 mg/L as Al) into the bioreactor showed 19% reduction of TMP increase. However, inhibition of nitrifying bacteria by continuous PACl injection was observed from batch experiments. In contrast, injection of powdered activated carbon (PAC, 0.6 g/L) was able to maintain the initial TMP of $0.2kg/cm^2$ for 5 days at the abnormal conditions. It may have been caused from the adsorption of extracellular polymeric substances (EPS), which was known to be excessively released during growth inhibition condition and act as the major foulants in MBR operations.

• Journal of Korea Water Resources Association
• /
• v.38 no.10 s.159
• /
• pp.841-849
• /
• 2005

Two-phase flows, e.g. sediment-laden flow and bubbly flow, have two different flow profiles; flow velocity and sediment velocity. To measure velocity distributions of two-phase flows, it is necessary to use sophisticated instruments which can separate velocity profiles of two-phases. For bubbly flows, PIV (Particle Image Velocimetry) or PTV (Particle Tracking Velocimetry) has given fairly good velocity profiles of two-phases. However, for sediment-laden flows, the applications of PIV or PTV has not been so successful, because the sediment particles introduced to the flow kept the images from being analyzed. A new algorithm, which consists of several image analysis methods, is proposed to analyze sediment-laden flows. For detection algorithm, threshold method, edge detection method, and thinning method are adapted, and for finding matching pair PIV and PTV routines are combined. The proposed method can (1) detect sediment particles with irregular boundaries, (2) remove reflected images and scattered images, and (3) discriminate tracer particles from reflected images of sediment particles.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.1
• /
• pp.77-81
• /
• 2001

Necrotizing fasciitis is defined as infectious disease showing extensive necrosis of the superficial fascia with widespread involvement of the surrounding tissues and concurrent systemic toxicity. It is found commonly in the extremities, the trunk and the perineum, but shows extremely rare occurrence in the well vascularized area such as head and neck area. Occurred in the head and neck area, it is called "cervicofacial necrotizing fasciitis" (CFNF). It is a fatal disease which carries a mortality rate up to 60%. Early diagnosis, aggressive surgical debridement of necrotic tissues and massive antibiotics therapy are essential for achieving a favorable outcome. We present a case of cervicofacial necrotizing fasciitis in 35-year-old male patient with literature review.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.17-24
• /
• 2005

Korean pine (Pinus koraiensis Sieb.et Zucc.) boards of 30 mm thickness were treated by steaming and four different drying methods. Small specimens were taken from the sapwoods of the treated boards and their longitudinal liquid permeability was measured according to Darcy's law. The specimens were also extracted with alcohol and aceton solutions to examine the mechanism of liquid flow in wood. It was observed that specific permeability drastically decreases with measurement time, resulting in violation of Darcy's law. It may be due to that air bubbles formed under vacuum block flow paths in resin canals. The average specific permeabilities of non-extracted and extracted specimens are different from one treatment to another. It is supposed that the properties of residual resin in resin canals change depending on the conditions of treatments. Anatomical examination was conducted with a scanning electron microscope.

• Korean Journal of Poultry Science
• /
• v.23 no.1
• /
• pp.9-17
• /
• 1996

This study was conducted to compare the survival rate of chick embryos among different eggshell window positions and to search for the most appropriate injection position. The eggshells were punctured at blunt-end, sharp-end and side-up with a sterilized fine forceps, respectively. The survival rate of sharp-end window was higher than the other window positions. Injection of Dulbecco’s modified eagle’s medium (DMEM) through blunt-end window (BE1) was impossible because inner cell membrane was obscure. The 2 ${\mu}$L DMEM was injected into 2.5 d-old embryo blood vessel through sharp end window. To prevent hemorrhages at the point of injection, the air bubbles were injected into the embryo blood vessel. The survival rate of chicks embryo in sharp end window was about 17.0％. Therefore, this sharp-end window system will be helpful for the production of germline chimera or transgenic chicken using primordial germ cells ( PGCs ).